Rev 838 | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 838 | - | 1 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
| 2 | * irmp.h |
||
| 3 | * |
||
| 4 | * Copyright (c) 2009-2010 Frank Meyer - frank(at)fli4l.de |
||
| 5 | * |
||
| 903 | - | 6 | * $Id: irmp.h,v 1.45 2011/01/18 13:02:15 fm Exp $ |
| 838 | - | 7 | * |
| 8 | * ATMEGA88 @ 8 MHz |
||
| 9 | * |
||
| 10 | * This program is free software; you can redistribute it and/or modify |
||
| 11 | * it under the terms of the GNU General Public License as published by |
||
| 12 | * the Free Software Foundation; either version 2 of the License, or |
||
| 13 | * (at your option) any later version. |
||
| 14 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
| 15 | */ |
||
| 16 | |||
| 17 | #ifndef _WC_IRMP_H_ |
||
| 18 | #define _WC_IRMP_H_ |
||
| 19 | |||
| 20 | #ifdef __cplusplus |
||
| 21 | extern "C" |
||
| 22 | { |
||
| 23 | #endif |
||
| 24 | |||
| 25 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
| 26 | * timing constants: |
||
| 27 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
| 28 | */ |
||
| 29 | #define IRMP_TIMEOUT_TIME 16500.0e-6 // timeout after 16.5 ms darkness |
||
| 30 | #define IRMP_TIMEOUT_TIME_MS 16500L // timeout after 16.5 ms darkness |
||
| 31 | |||
| 32 | #if IRMP_SUPPORT_NIKON_PROTOCOL == 1 |
||
| 33 | #define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!) |
||
| 34 | #define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness |
||
| 35 | typedef uint16_t PAUSE_LEN; |
||
| 36 | #define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5) |
||
| 37 | #else |
||
| 38 | #if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254 |
||
| 39 | typedef uint16_t PAUSE_LEN; |
||
| 40 | #else |
||
| 41 | typedef uint8_t PAUSE_LEN; |
||
| 42 | #endif |
||
| 43 | #endif |
||
| 44 | |||
| 45 | #define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5) |
||
| 46 | |||
| 47 | /*--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
| 48 | * IR protocols |
||
| 49 | *--------------------------------------------------------------------------------------------------------------------------------------------------- |
||
| 50 | */ |
||
| 51 | #define IRMP_SIRCS_PROTOCOL 1 // Sony |
||
| 52 | #define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc. |
||
| 53 | #define IRMP_SAMSUNG_PROTOCOL 3 // Samsung |
||
| 54 | #define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita |
||
| 55 | #define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc) |
||
| 56 | #define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba |
||
| 57 | #define IRMP_RC5_PROTOCOL 7 // Philips etc |
||
| 58 | #define IRMP_DENON_PROTOCOL 8 // Denon |
||
| 59 | #define IRMP_RC6_PROTOCOL 9 // Philips etc |
||
| 60 | #define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37 |
||
| 61 | #define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC |
||
| 62 | #define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba |
||
| 63 | #define IRMP_NUBERT_PROTOCOL 13 // Nubert |
||
| 64 | #define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen |
||
| 65 | #define IRMP_GRUNDIG_PROTOCOL 15 // Grundig |
||
| 66 | #define IRMP_NOKIA_PROTOCOL 16 // Nokia |
||
| 67 | #define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset |
||
| 68 | #define IRMP_FDC_PROTOCOL 18 // FDC keyboard |
||
| 69 | #define IRMP_RCCAR_PROTOCOL 19 // RC Car |
||
| 70 | #define IRMP_JVC_PROTOCOL 20 // JVC |
||
| 71 | #define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX |
||
| 72 | #define IRMP_NIKON_PROTOCOL 22 // Nikon |
||
| 73 | |||
| 74 | // some flags of struct IRMP_PARAMETER: |
||
| 75 | #define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01 |
||
| 76 | #define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02 |
||
| 77 | |||
| 78 | #define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse |
||
| 79 | #define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause |
||
| 80 | #define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse |
||
| 81 | #define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse |
||
| 82 | #define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause |
||
| 83 | #define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times |
||
| 84 | #define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms |
||
| 85 | #define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms |
||
| 86 | #define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits |
||
| 87 | #define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits |
||
| 88 | #define SIRCS_COMMAND_OFFSET 0 // skip 0 bits |
||
| 89 | #define SIRCS_COMMAND_LEN 15 // read 12-15 command bits |
||
| 90 | #define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length |
||
| 91 | #define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20 |
||
| 92 | #define SIRCS_STOP_BIT 0 // has no stop bit |
||
| 93 | #define SIRCS_LSB 1 // LSB...MSB |
||
| 94 | #define SIRCS_FLAGS 0 // flags |
||
| 95 | |||
| 96 | #define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
||
| 97 | #define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
| 98 | #define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause |
||
| 99 | #define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse |
||
| 100 | #define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
| 101 | #define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
||
| 102 | #define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
||
| 103 | #define NEC_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 104 | #define NEC_ADDRESS_LEN 16 // read 16 address bits |
||
| 105 | #define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address) |
||
| 106 | #define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command) |
||
| 107 | #define NEC_COMPLETE_DATA_LEN 32 // complete length |
||
| 108 | #define NEC_STOP_BIT 1 // has stop bit |
||
| 109 | #define NEC_LSB 1 // LSB...MSB |
||
| 110 | #define NEC_FLAGS 0 // flags |
||
| 111 | |||
| 112 | #define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse |
||
| 113 | #define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
| 114 | #define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse |
||
| 115 | #define SAMSUNG_1_PAUSE_TIME 1450.0e-6 // 1450 usec pause |
||
| 116 | #define SAMSUNG_0_PAUSE_TIME 450.0e-6 // 450 usec pause |
||
| 117 | #define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 118 | #define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 119 | #define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits |
||
| 120 | #define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit |
||
| 121 | #define SAMSUNG_ID_LEN 4 // read 4 id bits |
||
| 122 | #define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits |
||
| 123 | #define SAMSUNG_COMMAND_LEN 16 // read 16 command bits |
||
| 124 | #define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length |
||
| 125 | #define SAMSUNG_STOP_BIT 1 // has stop bit |
||
| 126 | #define SAMSUNG_LSB 1 // LSB...MSB? |
||
| 127 | #define SAMSUNG_FLAGS 0 // flags |
||
| 128 | |||
| 129 | #define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits |
||
| 130 | #define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits |
||
| 131 | #define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length |
||
| 132 | #define SAMSUNG32_FRAMES 2 // SAMSUNG32 sends each frame 2 times |
||
| 133 | #define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms |
||
| 134 | #define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 40ms |
||
| 135 | |||
| 136 | #define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse |
||
| 137 | #define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause |
||
| 138 | #define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse |
||
| 139 | #define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause |
||
| 140 | #define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause |
||
| 141 | #define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 142 | #define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits |
||
| 143 | #define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits |
||
| 144 | #define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits |
||
| 145 | #define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command) |
||
| 146 | #define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length |
||
| 147 | #define MATSUSHITA_STOP_BIT 1 // has stop bit |
||
| 148 | #define MATSUSHITA_LSB 1 // LSB...MSB? |
||
| 149 | #define MATSUSHITA_FLAGS 0 // flags |
||
| 150 | |||
| 151 | #define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse |
||
| 152 | #define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
| 153 | #define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse |
||
| 154 | #define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause |
||
| 155 | #define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause |
||
| 156 | #define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms |
||
| 157 | #define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms |
||
| 158 | #define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 159 | #define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits |
||
| 160 | #define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre) |
||
| 161 | #define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id) |
||
| 162 | #define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length |
||
| 163 | #define KASEIKYO_STOP_BIT 1 // has stop bit |
||
| 164 | #define KASEIKYO_LSB 1 // LSB...MSB? |
||
| 165 | #define KASEIKYO_FRAMES 2 // KASEIKYO sends 1st frame 2 times |
||
| 166 | #define KASEIKYO_FLAGS 0 // flags |
||
| 167 | |||
| 168 | #define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
| 169 | #define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
| 170 | #define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
| 171 | #define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
| 172 | #define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
||
| 173 | #define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 174 | #define RECS80_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
| 175 | #define RECS80_ADDRESS_LEN 3 // read 3 address bits |
||
| 176 | #define RECS80_COMMAND_OFFSET 5 // skip 5 bits (2nd start + 1 toggle + 3 address) |
||
| 177 | #define RECS80_COMMAND_LEN 6 // read 6 command bits |
||
| 178 | #define RECS80_COMPLETE_DATA_LEN 11 // complete length |
||
| 179 | #define RECS80_STOP_BIT 1 // has stop bit |
||
| 180 | #define RECS80_LSB 0 // MSB...LSB |
||
| 181 | #define RECS80_FLAGS 0 // flags |
||
| 182 | |||
| 183 | #define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause |
||
| 184 | #define RC5_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 185 | #define RC5_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
| 186 | #define RC5_ADDRESS_LEN 5 // read 5 address bits |
||
| 187 | #define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address) |
||
| 188 | #define RC5_COMMAND_LEN 6 // read 6 command bits |
||
| 189 | #define RC5_COMPLETE_DATA_LEN 13 // complete length |
||
| 190 | #define RC5_STOP_BIT 0 // has no stop bit |
||
| 191 | #define RC5_LSB 0 // MSB...LSB |
||
| 192 | #define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags |
||
| 193 | |||
| 903 | - | 194 | #define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory |
| 195 | #define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory |
||
| 196 | #define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory |
||
| 838 | - | 197 | #define DENON_FRAMES 2 // DENON sends each frame 2 times |
| 198 | #define DENON_AUTO_REPETITION_PAUSE_TIME 65.0e-3 // inverted repetition after 65ms |
||
| 199 | #define DENON_FRAME_REPEAT_PAUSE_TIME 65.0e-3 // frame repeat after 65ms |
||
| 200 | #define DENON_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 201 | #define DENON_ADDRESS_LEN 5 // read 5 address bits |
||
| 202 | #define DENON_COMMAND_OFFSET 5 // skip 5 |
||
| 203 | #define DENON_COMMAND_LEN 10 // read 10 command bits |
||
| 204 | #define DENON_COMPLETE_DATA_LEN 15 // complete length |
||
| 205 | #define DENON_STOP_BIT 1 // has stop bit |
||
| 206 | #define DENON_LSB 0 // MSB...LSB |
||
| 207 | #define DENON_FLAGS 0 // flags |
||
| 208 | |||
| 209 | #define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse |
||
| 210 | #define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause |
||
| 211 | #define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause |
||
| 212 | #define RC6_BIT_TIME 444.0e-6 // 889 usec pulse/pause |
||
| 213 | #define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 214 | #define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit |
||
| 215 | #define RC6_ADDRESS_LEN 8 // read 8 address bits |
||
| 216 | #define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address) |
||
| 217 | #define RC6_COMMAND_LEN 8 // read 8 command bits |
||
| 218 | #define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length |
||
| 219 | #define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length |
||
| 220 | #define RC6_STOP_BIT 0 // has no stop bit |
||
| 221 | #define RC6_LSB 0 // MSB...LSB |
||
| 222 | #define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
| 223 | |||
| 224 | #define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
| 225 | #define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause |
||
| 226 | #define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse |
||
| 227 | #define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause |
||
| 228 | #define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause |
||
| 229 | #define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 230 | #define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle) |
||
| 231 | #define RECS80EXT_ADDRESS_LEN 4 // read 3 address bits |
||
| 232 | #define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address) |
||
| 233 | #define RECS80EXT_COMMAND_LEN 6 // read 6 command bits |
||
| 234 | #define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length |
||
| 235 | #define RECS80EXT_STOP_BIT 1 // has stop bit |
||
| 236 | #define RECS80EXT_LSB 0 // MSB...LSB |
||
| 237 | #define RECS80EXT_FLAGS 0 // flags |
||
| 238 | |||
| 239 | #define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
||
| 240 | #define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause |
||
| 241 | #define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse |
||
| 242 | #define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause |
||
| 243 | #define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse |
||
| 244 | #define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause |
||
| 245 | #define NUBERT_FRAMES 2 // Nubert sends 2 frames |
||
| 246 | #define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms |
||
| 247 | #define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms |
||
| 248 | #define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 249 | #define NUBERT_ADDRESS_LEN 0 // read 0 address bits |
||
| 250 | #define NUBERT_COMMAND_OFFSET 0 // skip 0 bits |
||
| 251 | #define NUBERT_COMMAND_LEN 10 // read 10 bits |
||
| 252 | #define NUBERT_COMPLETE_DATA_LEN 10 // complete length |
||
| 253 | #define NUBERT_STOP_BIT 1 // has stop bit |
||
| 254 | #define NUBERT_LSB 0 // MSB? |
||
| 255 | #define NUBERT_FLAGS 0 // flags |
||
| 256 | |||
| 257 | #define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
| 258 | #define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
| 259 | #define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
| 260 | #define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
| 261 | #define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
| 262 | #define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause |
||
| 263 | #define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
| 264 | #define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
| 265 | #define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse |
||
| 266 | #define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause |
||
| 267 | #define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause |
||
| 268 | #define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit) |
||
| 269 | #define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit) |
||
| 270 | #define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 271 | #define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits |
||
| 272 | #define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits |
||
| 273 | #define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4 |
||
| 274 | #define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits |
||
| 275 | #define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit |
||
| 276 | #define BANG_OLUFSEN_STOP_BIT 1 // has stop bit |
||
| 277 | #define BANG_OLUFSEN_LSB 0 // MSB...LSB |
||
| 278 | #define BANG_OLUFSEN_FLAGS 0 // flags |
||
| 279 | |||
| 280 | #define GRUNDIG_OR_NOKIA_BIT_TIME 528.0e-6 // 528 usec pulse/pause |
||
| 281 | #define GRUNDIG_OR_NOKIA_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit |
||
| 282 | #define GRUNDIG_OR_NOKIA_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms |
||
| 283 | #define GRUNDIG_OR_NOKIA_STOP_BIT 0 // has no stop bit |
||
| 284 | #define GRUNDIG_OR_NOKIA_LSB 1 // MSB...LSB |
||
| 285 | #define GRUNDIG_OR_NOKIA_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
| 286 | |||
| 287 | #define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times |
||
| 288 | #define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
||
| 289 | #define GRUNDIG_ADDRESS_OFFSET 0 // no address |
||
| 290 | #define GRUNDIG_ADDRESS_LEN 0 // no address |
||
| 291 | #define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit |
||
| 292 | #define GRUNDIG_COMMAND_LEN 9 // read 9 command bits |
||
| 293 | #define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits |
||
| 294 | |||
| 295 | #define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times |
||
| 296 | #define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms |
||
| 297 | #define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits) |
||
| 298 | #define NOKIA_ADDRESS_LEN 8 // 7 address bits |
||
| 299 | #define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit) |
||
| 300 | #define NOKIA_COMMAND_LEN 8 // read 8 command bits |
||
| 301 | #define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits |
||
| 302 | |||
| 303 | #define SIEMENS_BIT_TIME 250.0e-6 // 250 usec pulse/pause |
||
| 304 | #define SIEMENS_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms |
||
| 305 | #define SIEMENS_ADDRESS_OFFSET 2 // skip 2 start bits |
||
| 306 | #define SIEMENS_ADDRESS_LEN 12 // read 12 address bits |
||
| 307 | #define SIEMENS_COMMAND_OFFSET 15 // skip 15 bits (2 start bits + 12 address bits + 1 inverted bit) |
||
| 308 | #define SIEMENS_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit. |
||
| 309 | #define SIEMENS_COMPLETE_DATA_LEN 23 // complete length |
||
| 310 | #define SIEMENS_STOP_BIT 0 // has no stop bit |
||
| 311 | #define SIEMENS_LSB 0 // MSB...LSB |
||
| 312 | #define SIEMENS_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags |
||
| 313 | |||
| 314 | #define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse |
||
| 315 | #define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause |
||
| 316 | #define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse |
||
| 317 | #define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause |
||
| 318 | #define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause |
||
| 319 | #define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
||
| 320 | #define FDC_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 321 | #define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command |
||
| 322 | #define FDC_COMMAND_OFFSET 20 // skip 20 bits |
||
| 323 | #define FDC_COMMAND_LEN 12 // read 12 bits |
||
| 324 | #define FDC_COMPLETE_DATA_LEN 40 // complete length |
||
| 325 | #define FDC_STOP_BIT 1 // has stop bit |
||
| 326 | #define FDC_LSB 1 // LSB...MSB |
||
| 327 | #define FDC_FLAGS 0 // flags |
||
| 328 | |||
| 329 | #define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse |
||
| 330 | #define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause |
||
| 331 | #define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse |
||
| 332 | #define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause |
||
| 333 | #define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause |
||
| 334 | #define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms |
||
| 335 | #define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 336 | #define RCCAR_ADDRESS_LEN 0 // read 0 address bits |
||
| 337 | #define RCCAR_COMMAND_OFFSET 0 // skip 0 bits |
||
| 338 | #define RCCAR_COMMAND_LEN 13 // read 13 bits |
||
| 339 | #define RCCAR_COMPLETE_DATA_LEN 13 // complete length |
||
| 340 | #define RCCAR_STOP_BIT 1 // has stop bit |
||
| 341 | #define RCCAR_LSB 1 // LSB...MSB |
||
| 342 | #define RCCAR_FLAGS 0 // flags |
||
| 343 | |||
| 344 | #define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse |
||
| 345 | #define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause |
||
| 346 | #define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse |
||
| 347 | #define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause |
||
| 348 | #define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause |
||
| 349 | #define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms |
||
| 350 | #define JVC_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 351 | #define JVC_ADDRESS_LEN 4 // read 4 address bits |
||
| 352 | #define JVC_COMMAND_OFFSET 4 // skip 4 bits |
||
| 353 | #define JVC_COMMAND_LEN 12 // read 12 bits |
||
| 354 | #define JVC_COMPLETE_DATA_LEN 16 // complete length |
||
| 355 | #define JVC_STOP_BIT 1 // has stop bit |
||
| 356 | #define JVC_LSB 1 // LSB...MSB |
||
| 357 | #define JVC_FLAGS 0 // flags |
||
| 358 | |||
| 359 | #define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse |
||
| 360 | #define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause |
||
| 361 | #define NIKON_PULSE_TIME 500.0e-6 // 520 usec pulse |
||
| 362 | #define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause |
||
| 363 | #define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause |
||
| 364 | #define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms |
||
| 365 | #define NIKON_ADDRESS_OFFSET 0 // skip 0 bits |
||
| 366 | #define NIKON_ADDRESS_LEN 0 // read 0 address bits |
||
| 367 | #define NIKON_COMMAND_OFFSET 0 // skip 0 bits |
||
| 368 | #define NIKON_COMMAND_LEN 2 // read 2 bits |
||
| 369 | #define NIKON_COMPLETE_DATA_LEN 2 // complete length |
||
| 370 | #define NIKON_STOP_BIT 1 // has stop bit |
||
| 371 | #define NIKON_LSB 0 // LSB...MSB |
||
| 372 | #define NIKON_FLAGS 0 // flags |
||
| 373 | |||
| 374 | #define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms |
||
| 375 | // KASEIKYO: automatic repetition after 75ms |
||
| 376 | |||
| 377 | #define TRUE 1 |
||
| 378 | #define FALSE 0 |
||
| 379 | |||
| 380 | #define IRMP_FLAG_REPETITION 0x01 |
||
| 381 | |||
| 382 | typedef struct |
||
| 383 | { |
||
| 384 | uint8_t protocol; // protocol, i.e. NEC_PROTOCOL |
||
| 385 | uint16_t address; // address |
||
| 386 | uint16_t command; // command |
||
| 387 | uint8_t flags; // flags, e.g. repetition |
||
| 388 | } IRMP_DATA; |
||
| 389 | |||
| 390 | |||
| 391 | /** |
||
| 392 | * Initialize IRMP decoder |
||
| 393 | * @details Configures IRMP input pin |
||
| 394 | */ |
||
| 395 | extern void irmp_init (void); |
||
| 396 | |||
| 397 | /** |
||
| 398 | * Get IRMP data |
||
| 399 | * @details gets decoded IRMP data |
||
| 400 | * @param pointer in order to store IRMP data |
||
| 401 | * @return TRUE: successful, FALSE: failed |
||
| 402 | */ |
||
| 403 | extern uint8_t irmp_get_data (IRMP_DATA *); |
||
| 404 | |||
| 405 | /** |
||
| 406 | * ISR routine |
||
| 407 | * @details ISR routine, called 10000 times per second |
||
| 408 | */ |
||
| 409 | extern uint8_t irmp_ISR (void); |
||
| 410 | |||
| 411 | #ifdef __cplusplus |
||
| 412 | } |
||
| 413 | #endif |
||
| 414 | |||
| 415 | #endif /* _WC_IRMP_H_ */ |