Details | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 167 | KeyOz | 1 | /*************************************************************************** |
| 2 | * Copyright (C) 2008 by Manuel Schrape * |
||
| 3 | * manuel.schrape@gmx.de * |
||
| 4 | * * |
||
| 5 | * This program is free software; you can redistribute it and/or modify * |
||
| 6 | * it under the terms of the GNU General Public License as published by * |
||
| 7 | * the Free Software Foundation; either version 2 of the License. * |
||
| 8 | * * |
||
| 9 | * This program is distributed in the hope that it will be useful, * |
||
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
||
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
||
| 12 | * GNU General Public License for more details. * |
||
| 13 | * * |
||
| 14 | * You should have received a copy of the GNU General Public License * |
||
| 15 | * along with this program; if not, write to the * |
||
| 16 | * Free Software Foundation, Inc., * |
||
| 17 | * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
||
| 18 | ***************************************************************************/ |
||
| 19 | #include <QFileDialog> |
||
| 20 | #include <QSettings> |
||
| 21 | |||
| 22 | #include "wdg_Settings.h" |
||
| 227 | KeyOz | 23 | #include "../Classes/ToolBox.h" |
| 167 | KeyOz | 24 | |
| 25 | wdg_Settings::wdg_Settings(QWidget *parent) : QWidget(parent) |
||
| 26 | { |
||
| 27 | setupUi(this); |
||
| 306 | KeyOz | 28 | listWidget->setCurrentRow(0); |
| 167 | KeyOz | 29 | |
| 234 | KeyOz | 30 | #ifndef _BETA_ |
| 31 | #endif |
||
| 32 | |||
| 167 | KeyOz | 33 | connect(pb_Load, SIGNAL(clicked()), this, SLOT(slot_LoadParameter())); |
| 34 | connect(pb_Save, SIGNAL(clicked()), this, SLOT(slot_SaveParameter())); |
||
| 35 | |||
| 36 | // Settings - Looping-Pfeile |
||
| 37 | connect(tb_9_6, SIGNAL(clicked()), this, SLOT(slot_tbUp())); |
||
| 38 | connect(tb_9_7, SIGNAL(clicked()), this, SLOT(slot_tbDown())); |
||
| 39 | connect(tb_9_8, SIGNAL(clicked()), this, SLOT(slot_tbLeft())); |
||
| 40 | connect(tb_9_9, SIGNAL(clicked()), this, SLOT(slot_tbRight())); |
||
| 41 | |||
| 42 | // Settings - LED's J16 |
||
| 43 | connect(J16_0, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 44 | connect(J16_1, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 45 | connect(J16_2, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 46 | connect(J16_3, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 47 | connect(J16_4, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 48 | connect(J16_5, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 49 | connect(J16_6, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 50 | connect(J16_7, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 51 | |||
| 52 | // Settings - LED's J17 |
||
| 53 | connect(J17_0, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 54 | connect(J17_1, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 55 | connect(J17_2, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 56 | connect(J17_3, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 57 | connect(J17_4, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 58 | connect(J17_5, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 59 | connect(J17_6, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 60 | connect(J17_7, SIGNAL(clicked()), this, SLOT(slot_LEDtoValue())); |
||
| 61 | |||
| 62 | connect(sb_11_1, SIGNAL(valueChanged(int)), this, SLOT(slot_ValuetoLED16(int))); |
||
| 63 | connect(sb_11_3, SIGNAL(valueChanged(int)), this, SLOT(slot_ValuetoLED17(int))); |
||
| 64 | } |
||
| 65 | |||
| 227 | KeyOz | 66 | void wdg_Settings::set_Config(cSettings *pConfig) |
| 67 | { |
||
| 68 | Config = pConfig; |
||
| 69 | } |
||
| 70 | |||
| 167 | KeyOz | 71 | void wdg_Settings::set_LED(QToolButton *ToolButton, bool On) |
| 72 | { |
||
| 73 | if (ToolButton->text() == QString("0") && On) |
||
| 74 | { |
||
| 199 | KeyOz | 75 | ToolButton->setIcon(ToolBox::Icon(0)); |
| 167 | KeyOz | 76 | ToolButton->setText("1"); |
| 77 | } |
||
| 78 | else if (ToolButton->text() == QString("1") && !On) |
||
| 79 | { |
||
| 199 | KeyOz | 80 | ToolButton->setIcon(ToolBox::Icon(4)); |
| 167 | KeyOz | 81 | ToolButton->setText("0"); |
| 82 | } |
||
| 83 | else if (ToolButton->text() == QString("00") && On) |
||
| 84 | { |
||
| 199 | KeyOz | 85 | ToolButton->setIcon(ToolBox::Icon(0)); |
| 167 | KeyOz | 86 | ToolButton->setText("11"); |
| 87 | } |
||
| 88 | else if (ToolButton->text() == QString("11") && !On) |
||
| 89 | { |
||
| 199 | KeyOz | 90 | ToolButton->setIcon(ToolBox::Icon(4)); |
| 167 | KeyOz | 91 | ToolButton->setText("00"); |
| 92 | } |
||
| 93 | } |
||
| 94 | |||
| 95 | void wdg_Settings::slot_LEDtoValue() |
||
| 96 | { |
||
| 97 | QToolButton *ToolButton = (QToolButton*)sender(); |
||
| 98 | if (ToolButton->text() == QString("0")) |
||
| 99 | { |
||
| 100 | set_LED(ToolButton, true); |
||
| 101 | sb_11_1->setValue(sb_11_1->value() + ToolButton->toolTip().toInt()); |
||
| 102 | } |
||
| 103 | else if (ToolButton->text() == QString("1")) |
||
| 104 | { |
||
| 105 | set_LED(ToolButton); |
||
| 106 | sb_11_1->setValue(sb_11_1->value() - ToolButton->toolTip().toInt()); |
||
| 107 | } |
||
| 108 | else if (ToolButton->text() == QString("00")) |
||
| 109 | { |
||
| 110 | set_LED(ToolButton, true); |
||
| 111 | sb_11_3->setValue(sb_11_3->value() + ToolButton->toolTip().toInt()); |
||
| 112 | } |
||
| 113 | else if (ToolButton->text() == QString("11")) |
||
| 114 | { |
||
| 115 | set_LED(ToolButton); |
||
| 116 | sb_11_3->setValue(sb_11_3->value() - ToolButton->toolTip().toInt()); |
||
| 117 | } |
||
| 118 | } |
||
| 119 | |||
| 120 | void wdg_Settings::slot_ValuetoLED16(int Wert) |
||
| 121 | { |
||
| 122 | set_LED(J16_0); |
||
| 123 | set_LED(J16_1); |
||
| 124 | set_LED(J16_2); |
||
| 125 | set_LED(J16_3); |
||
| 126 | set_LED(J16_4); |
||
| 127 | set_LED(J16_5); |
||
| 128 | set_LED(J16_6); |
||
| 129 | set_LED(J16_7); |
||
| 130 | |||
| 131 | for (int a = 0; a < 8; a++) |
||
| 132 | { |
||
| 133 | if (Wert > 127) |
||
| 134 | { |
||
| 135 | set_LED(J16_0, true); |
||
| 136 | Wert = Wert - 128; |
||
| 137 | } |
||
| 138 | if (Wert > 63) |
||
| 139 | { |
||
| 140 | set_LED(J16_1, true); |
||
| 141 | Wert = Wert - 64; |
||
| 142 | } |
||
| 143 | if (Wert > 31) |
||
| 144 | { |
||
| 145 | set_LED(J16_2, true); |
||
| 146 | Wert = Wert - 32; |
||
| 147 | } |
||
| 148 | if (Wert > 15) |
||
| 149 | { |
||
| 150 | set_LED(J16_3, true); |
||
| 151 | Wert = Wert - 16; |
||
| 152 | } |
||
| 153 | if (Wert > 7) |
||
| 154 | { |
||
| 155 | set_LED(J16_4, true); |
||
| 156 | Wert = Wert - 8; |
||
| 157 | } |
||
| 158 | if (Wert > 3) |
||
| 159 | { |
||
| 160 | set_LED(J16_5, true); |
||
| 161 | Wert = Wert - 4; |
||
| 162 | } |
||
| 163 | if (Wert > 1) |
||
| 164 | { |
||
| 165 | set_LED(J16_6, true); |
||
| 166 | Wert = Wert - 2; |
||
| 167 | } |
||
| 168 | if (Wert > 0) |
||
| 169 | { |
||
| 170 | set_LED(J16_7, true); |
||
| 171 | Wert = Wert - 1; |
||
| 172 | } |
||
| 173 | } |
||
| 174 | } |
||
| 175 | |||
| 176 | void wdg_Settings::slot_ValuetoLED17(int Wert) |
||
| 177 | { |
||
| 178 | set_LED(J17_0); |
||
| 179 | set_LED(J17_1); |
||
| 180 | set_LED(J17_2); |
||
| 181 | set_LED(J17_3); |
||
| 182 | set_LED(J17_4); |
||
| 183 | set_LED(J17_5); |
||
| 184 | set_LED(J17_6); |
||
| 185 | set_LED(J17_7); |
||
| 186 | |||
| 187 | for (int a = 0; a < 8; a++) |
||
| 188 | { |
||
| 189 | if (Wert > 127) |
||
| 190 | { |
||
| 191 | set_LED(J17_0, true); |
||
| 192 | Wert = Wert - 128; |
||
| 193 | } |
||
| 194 | if (Wert > 63) |
||
| 195 | { |
||
| 196 | set_LED(J17_1, true); |
||
| 197 | Wert = Wert - 64; |
||
| 198 | } |
||
| 199 | if (Wert > 31) |
||
| 200 | { |
||
| 201 | set_LED(J17_2, true); |
||
| 202 | Wert = Wert - 32; |
||
| 203 | } |
||
| 204 | if (Wert > 15) |
||
| 205 | { |
||
| 206 | set_LED(J17_3, true); |
||
| 207 | Wert = Wert - 16; |
||
| 208 | } |
||
| 209 | if (Wert > 7) |
||
| 210 | { |
||
| 211 | set_LED(J17_4, true); |
||
| 212 | Wert = Wert - 8; |
||
| 213 | } |
||
| 214 | if (Wert > 3) |
||
| 215 | { |
||
| 216 | set_LED(J17_5, true); |
||
| 217 | Wert = Wert - 4; |
||
| 218 | } |
||
| 219 | if (Wert > 1) |
||
| 220 | { |
||
| 221 | set_LED(J17_6, true); |
||
| 222 | Wert = Wert - 2; |
||
| 223 | } |
||
| 224 | if (Wert > 0) |
||
| 225 | { |
||
| 226 | set_LED(J17_7, true); |
||
| 227 | Wert = Wert - 1; |
||
| 228 | } |
||
| 229 | } |
||
| 230 | } |
||
| 231 | |||
| 232 | void wdg_Settings::slot_tbUp() |
||
| 233 | { |
||
| 234 | if (tb_9_6->text() == QString("0")) |
||
| 235 | { |
||
| 236 | tb_9_6->setText("1"); |
||
| 237 | } |
||
| 238 | else |
||
| 239 | { |
||
| 240 | tb_9_6->setText("0"); |
||
| 241 | } |
||
| 242 | } |
||
| 243 | |||
| 244 | void wdg_Settings::slot_tbDown() |
||
| 245 | { |
||
| 246 | if (tb_9_7->text() == QString("0")) |
||
| 247 | { |
||
| 248 | tb_9_7->setText("1"); |
||
| 249 | } |
||
| 250 | else |
||
| 251 | { |
||
| 252 | tb_9_7->setText("0"); |
||
| 253 | } |
||
| 254 | } |
||
| 255 | |||
| 256 | void wdg_Settings::slot_tbLeft() |
||
| 257 | { |
||
| 258 | if (tb_9_8->text() == QString("0")) |
||
| 259 | { |
||
| 260 | tb_9_8->setText("1"); |
||
| 261 | } |
||
| 262 | else |
||
| 263 | { |
||
| 264 | tb_9_8->setText("0"); |
||
| 265 | } |
||
| 266 | } |
||
| 267 | |||
| 268 | void wdg_Settings::slot_tbRight() |
||
| 269 | { |
||
| 270 | if (tb_9_9->text() == QString("0")) |
||
| 271 | { |
||
| 272 | tb_9_9->setText("1"); |
||
| 273 | } |
||
| 274 | else |
||
| 275 | { |
||
| 276 | tb_9_9->setText("0"); |
||
| 277 | } |
||
| 278 | } |
||
| 279 | |||
| 280 | void wdg_Settings::slot_LoadParameter() // DONE 0.71g |
||
| 281 | { |
||
| 227 | KeyOz | 282 | QString Filename = QFileDialog::getOpenFileName(this, "Mikrokopter Parameter laden", Config->DIR.Parameter + "", "Mikrokopter Parameter(*.mkp);;Alle Dateien (*)"); |
| 167 | KeyOz | 283 | |
| 284 | if (!Filename.isEmpty()) |
||
| 285 | { |
||
| 286 | int Set = sb_Set->value(); |
||
| 287 | QSettings Setting(Filename, QSettings::IniFormat); |
||
| 288 | |||
| 289 | Setting.beginGroup("Setup"); |
||
| 290 | QString Name = Setting.value("Name", QString("--noname--")).toString(); |
||
| 291 | char *CName = Name.toLatin1().data(); |
||
| 292 | int a; |
||
| 293 | |||
| 294 | for (a=0; a < Name.length(); a++) |
||
| 295 | { |
||
| 296 | ParameterSet[Set][P_NAME+a] = CName[a]; |
||
| 297 | } |
||
| 298 | while (a < 12) |
||
| 299 | { |
||
| 300 | ParameterSet[Set][P_NAME+a] = 0; |
||
| 301 | a++; |
||
| 302 | } |
||
| 303 | |||
| 304 | ParameterSet[Set][P_GLOBAL_CONF] = Setting.value("GlobalConfig", 0).toInt(); |
||
| 305 | Setting.endGroup(); |
||
| 306 | |||
| 307 | Setting.beginGroup("Channels"); |
||
| 308 | ParameterSet[Set][P_KANAL_NICK] = Setting.value("Nick", 1).toInt(); |
||
| 309 | ParameterSet[Set][P_KANAL_ROLL] = Setting.value("Roll", 2).toInt(); |
||
| 310 | ParameterSet[Set][P_KANAL_GAS] = Setting.value("Gas", 3).toInt(); |
||
| 311 | ParameterSet[Set][P_KANAL_GIER] = Setting.value("Gier", 4).toInt(); |
||
| 312 | ParameterSet[Set][P_KANAL_POTI1] = Setting.value("Poti_1", 5).toInt(); |
||
| 313 | ParameterSet[Set][P_KANAL_POTI2] = Setting.value("Poti_2", 6).toInt(); |
||
| 314 | ParameterSet[Set][P_KANAL_POTI3] = Setting.value("Poti_3", 7).toInt(); |
||
| 315 | ParameterSet[Set][P_KANAL_POTI4] = Setting.value("Poti_4", 8).toInt(); |
||
| 316 | Setting.endGroup(); |
||
| 317 | |||
| 318 | Setting.beginGroup("Stick"); |
||
| 319 | ParameterSet[Set][P_STICK_P] = Setting.value("Nick_Roll-P", 4).toInt(); |
||
| 320 | ParameterSet[Set][P_STICK_D] = Setting.value("Nick_Roll-D", 8).toInt(); |
||
| 321 | ParameterSet[Set][P_GIER_P] = Setting.value("Gier-P", 1).toInt(); |
||
| 322 | ParameterSet[Set][P_EXTERNAL] = Setting.value("ExternalControl", 1).toInt(); |
||
| 323 | Setting.endGroup(); |
||
| 324 | |||
| 325 | Setting.beginGroup("Altitude"); |
||
| 326 | ParameterSet[Set][P_MAXHOEHE] = Setting.value("Setpoint", 251).toInt(); |
||
| 327 | ParameterSet[Set][P_MIN_GAS] = Setting.value("MinGas", 30).toInt(); |
||
| 328 | ParameterSet[Set][P_HOEHE_P] = Setting.value("P", 10).toInt(); |
||
| 329 | ParameterSet[Set][P_DRUCK_D] = Setting.value("Barometric-D", 30).toInt(); |
||
| 330 | ParameterSet[Set][P_HOEHE_ACC] = Setting.value("Z-ACC-Effect", 30).toInt(); |
||
| 331 | ParameterSet[Set][P_HOEHE_GAIN] = Setting.value("Gain", 3).toInt(); |
||
| 332 | Setting.endGroup(); |
||
| 333 | |||
| 334 | Setting.beginGroup("Gyro"); |
||
| 335 | ParameterSet[Set][P_GYRO_P] = Setting.value("P", 80).toInt(); |
||
| 336 | ParameterSet[Set][P_GYRO_I] = Setting.value("I", 120).toInt(); |
||
| 234 | KeyOz | 337 | ParameterSet[Set][P_GYRO_D] = Setting.value("D", 0).toInt(); |
| 167 | KeyOz | 338 | ParameterSet[Set][P_DYNAMIC_STAB] = Setting.value("DynamicStability", 75).toInt(); |
| 339 | ParameterSet[Set][P_GYRO_ACC_FAKTOR] = Setting.value("ACC_Gyro-Factor", 30).toInt(); |
||
| 340 | ParameterSet[Set][P_GYRO_ACC_ABGL] = Setting.value("ACC_Gyro-Compensation", 32).toInt(); |
||
| 341 | ParameterSet[Set][P_DRIFT_KOMP] = Setting.value("DriftCompensation", 4).toInt(); |
||
| 342 | ParameterSet[Set][P_FAKTOR_I] = Setting.value("Main-I", 32).toInt(); |
||
| 343 | Setting.endGroup(); |
||
| 344 | |||
| 345 | Setting.beginGroup("Camera"); |
||
| 346 | ParameterSet[Set][P_SERVO_NICK_CONT] = Setting.value("ServoNickControl", 100).toInt(); |
||
| 347 | ParameterSet[Set][P_SERVO_NICK_COMP] = Setting.value("ServoNickCompensation", 40).toInt(); |
||
| 348 | ParameterSet[Set][P_SERVO_NICK_COMPI] = Setting.value("ServoNickInvert", 0).toInt(); |
||
| 349 | ParameterSet[Set][P_SERVO_NICK_MIN] = Setting.value("ServoNickMin", 50).toInt(); |
||
| 350 | ParameterSet[Set][P_SERVO_NICK_MAX] = Setting.value("ServoNickMax", 150).toInt(); |
||
| 351 | ParameterSet[Set][P_SERVO_NICK_REFR] = Setting.value("ServoNickRefreshRate", 5).toInt(); |
||
| 352 | Setting.endGroup(); |
||
| 353 | |||
| 354 | Setting.beginGroup("Others"); |
||
| 355 | ParameterSet[Set][P_GAS_MIN] = Setting.value("MinGas", 8).toInt(); |
||
| 356 | ParameterSet[Set][P_GAS_MAX] = Setting.value("MaxGas", 230).toInt(); |
||
| 357 | ParameterSet[Set][P_KOMPASS_WIRKUNG] = Setting.value("Compass-Effect", 128).toInt(); |
||
| 358 | ParameterSet[Set][P_UNTERSPANNUNG] = Setting.value("UnderVoltage", 94).toInt(); |
||
| 359 | ParameterSet[Set][P_NOTGAS] = Setting.value("NotGas", 35).toInt(); |
||
| 360 | ParameterSet[Set][P_NOTGASZEIT] = Setting.value("NotGasTime", 30).toInt(); |
||
| 361 | Setting.endGroup(); |
||
| 362 | |||
| 363 | Setting.beginGroup("Coupling"); |
||
| 234 | KeyOz | 364 | ParameterSet[Set][P_ACHS_KOPPLUNG1] = Setting.value("YawPosFeedback", 90).toInt(); |
| 365 | ParameterSet[Set][P_ACHS_KOPPLUNG2] = Setting.value("NickRollFeedback", 90).toInt(); |
||
| 366 | ParameterSet[Set][P_ACHS_GKOPPLUNG] = Setting.value("YawCorrection", 5).toInt(); |
||
| 167 | KeyOz | 367 | Setting.endGroup(); |
| 368 | |||
| 369 | Setting.beginGroup("Loop"); |
||
| 370 | ParameterSet[Set][P_LOOP_CONFIG] = Setting.value("Config", 0).toInt(); |
||
| 371 | ParameterSet[Set][P_LOOP_GAS_LIMIT] = Setting.value("GasLimit", 50).toInt(); |
||
| 372 | ParameterSet[Set][P_LOOP_THRESHOLD] = Setting.value("StickThreshold", 90).toInt(); |
||
| 373 | ParameterSet[Set][P_LOOP_HYSTERESE] = Setting.value("LoopHysteresis", 50).toInt(); |
||
| 374 | ParameterSet[Set][P_WINKEL_NICK] = Setting.value("TurnOverNick", 85).toInt(); |
||
| 375 | ParameterSet[Set][P_WINKEL_ROLL] = Setting.value("TurnOverRoll", 85).toInt(); |
||
| 376 | Setting.endGroup(); |
||
| 377 | |||
| 378 | Setting.beginGroup("User"); |
||
| 379 | ParameterSet[Set][P_USER_1] = Setting.value("Parameter_1", 0).toInt(); |
||
| 380 | ParameterSet[Set][P_USER_2] = Setting.value("Parameter_2", 0).toInt(); |
||
| 381 | ParameterSet[Set][P_USER_3] = Setting.value("Parameter_3", 0).toInt(); |
||
| 382 | ParameterSet[Set][P_USER_4] = Setting.value("Parameter_4", 0).toInt(); |
||
| 383 | ParameterSet[Set][P_USER_5] = Setting.value("Parameter_5", 0).toInt(); |
||
| 384 | ParameterSet[Set][P_USER_6] = Setting.value("Parameter_6", 0).toInt(); |
||
| 385 | ParameterSet[Set][P_USER_7] = Setting.value("Parameter_7", 0).toInt(); |
||
| 386 | ParameterSet[Set][P_USER_8] = Setting.value("Parameter_8", 0).toInt(); |
||
| 387 | Setting.endGroup(); |
||
| 388 | |||
| 389 | Setting.beginGroup("Output"); |
||
| 390 | ParameterSet[Set][P_J16_BITMASK] = Setting.value("J16_Bitmask", 255).toInt(); |
||
| 391 | ParameterSet[Set][P_J16_TIMING] = Setting.value("J16_Timing", 251).toInt(); |
||
| 392 | ParameterSet[Set][P_J17_BITMASK] = Setting.value("J17_Bitmask", 255).toInt(); |
||
| 393 | ParameterSet[Set][P_J17_TIMING] = Setting.value("J17_Timing", 251).toInt(); |
||
| 394 | Setting.endGroup(); |
||
| 395 | |||
| 396 | Setting.beginGroup("NaviCtrl"); |
||
| 199 | KeyOz | 397 | ParameterSet[Set][P_NAV_GPS_MODE] = Setting.value("GPS_ModeControl", 253).toInt(); |
| 398 | ParameterSet[Set][P_NAV_GPS_GAIN] = Setting.value("GPS_Gain", 100).toInt(); |
||
| 399 | ParameterSet[Set][P_NAV_GPS_P] = Setting.value("GPS_P", 90).toInt(); |
||
| 400 | ParameterSet[Set][P_NAV_GPS_I] = Setting.value("GPS_I", 90).toInt(); |
||
| 401 | ParameterSet[Set][P_NAV_GPS_D] = Setting.value("GPS_D", 90).toInt(); |
||
| 234 | KeyOz | 402 | ParameterSet[Set][P_NAV_GPS_P_LIMIT] = Setting.value("GPS_P_Limit", 75).toInt(); |
| 403 | ParameterSet[Set][P_NAV_GPS_I_LIMIT] = Setting.value("GPS_I_Limit", 75).toInt(); |
||
| 404 | ParameterSet[Set][P_NAV_GPS_D_LIMIT] = Setting.value("GPS_D_Limit", 75).toInt(); |
||
| 199 | KeyOz | 405 | ParameterSet[Set][P_NAV_GPS_ACC] = Setting.value("GPS_Acc", 0).toInt(); |
| 406 | ParameterSet[Set][P_NAV_GPS_MIN] = Setting.value("GPS_MinSat", 6).toInt(); |
||
| 407 | ParameterSet[Set][P_NAV_STICK_THRE] = Setting.value("GPS_StickThreshold", 8).toInt(); |
||
| 408 | ParameterSet[Set][P_NAV_WIND_CORR] = Setting.value("GPS_WindCorrection", 90).toInt(); |
||
| 409 | ParameterSet[Set][P_NAV_SPEED_COMP] = Setting.value("GPS_SpeedCompensation", 30).toInt(); |
||
| 410 | ParameterSet[Set][P_NAV_RADIUS] = Setting.value("GPS_MaxRadius", 100).toInt(); |
||
| 411 | ParameterSet[Set][P_NAV_ANGLE_LIMIT] = Setting.value("GPS_AngleLimit", 60).toInt(); |
||
| 234 | KeyOz | 412 | ParameterSet[Set][P_NAV_PH_LOGINTIME] = Setting.value("GPS_PH_Login_Time", 4).toInt(); |
| 167 | KeyOz | 413 | Setting.endGroup(); |
| 414 | |||
| 199 | KeyOz | 415 | show_FCSettings(Set, ParameterSet[Set]); |
| 167 | KeyOz | 416 | } |
| 417 | } |
||
| 418 | |||
| 419 | int wdg_Settings::get_Value(QComboBox *Combo) |
||
| 420 | { |
||
| 421 | if (Combo->currentText() == QString("Poti 1")) |
||
| 422 | return 251; |
||
| 423 | if (Combo->currentText() == QString("Poti 2")) |
||
| 424 | return 252; |
||
| 425 | if (Combo->currentText() == QString("Poti 3")) |
||
| 426 | return 253; |
||
| 427 | if (Combo->currentText() == QString("Poti 4")) |
||
| 428 | return 254; |
||
| 429 | return Combo->currentText().toInt(); |
||
| 430 | } |
||
| 431 | |||
| 432 | void wdg_Settings::store_ParameterSet(int Set) // DONE 0.71h |
||
| 433 | { |
||
| 434 | char *Name = le_SetName->text().toLatin1().data(); |
||
| 435 | |||
| 436 | int a; |
||
| 437 | |||
| 438 | for (a = 0; a < le_SetName->text().length(); a++) |
||
| 439 | { |
||
| 440 | ParameterSet[Set][P_NAME+a] = Name[a]; |
||
| 441 | } |
||
| 442 | |||
| 443 | while(a < 12) |
||
| 444 | { |
||
| 445 | ParameterSet[Set][P_NAME+a] = 0; |
||
| 446 | a++; |
||
| 447 | } |
||
| 448 | |||
| 449 | // Seite 1 |
||
| 450 | ParameterSet[Set][P_GLOBAL_CONF] = 0; |
||
| 451 | |||
| 452 | if (cb_1_1->isChecked()) |
||
| 453 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x01; |
||
| 454 | if (cb_1_2->isChecked()) |
||
| 455 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x02; |
||
| 456 | if (cb_1_3->isChecked()) |
||
| 457 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x04; |
||
| 458 | if (cb_1_4->isChecked()) |
||
| 459 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x08; |
||
| 460 | if (cb_1_5->isChecked()) |
||
| 461 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x10; |
||
| 462 | if (cb_1_6->isChecked()) |
||
| 463 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x20; |
||
| 464 | if (cb_1_7->isChecked()) |
||
| 465 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x40; |
||
| 466 | if (cb_1_8->isChecked()) |
||
| 467 | ParameterSet[Set][P_GLOBAL_CONF] = ParameterSet[Set][P_GLOBAL_CONF] | 0x80; |
||
| 468 | |||
| 469 | // Seite 2 |
||
| 470 | ParameterSet[Set][P_KANAL_NICK] = sb_2_1->value(); |
||
| 471 | ParameterSet[Set][P_KANAL_ROLL] = sb_2_2->value(); |
||
| 472 | ParameterSet[Set][P_KANAL_GAS] = sb_2_3->value(); |
||
| 473 | ParameterSet[Set][P_KANAL_GIER] = sb_2_4->value(); |
||
| 474 | ParameterSet[Set][P_KANAL_POTI1] = sb_2_5->value(); |
||
| 475 | ParameterSet[Set][P_KANAL_POTI2] = sb_2_6->value(); |
||
| 476 | ParameterSet[Set][P_KANAL_POTI3] = sb_2_7->value(); |
||
| 477 | ParameterSet[Set][P_KANAL_POTI4] = sb_2_8->value(); |
||
| 478 | |||
| 479 | // Seite 3 |
||
| 480 | ParameterSet[Set][P_STICK_P] = sb_3_1->value(); |
||
| 481 | ParameterSet[Set][P_STICK_D] = sb_3_2->value(); |
||
| 482 | ParameterSet[Set][P_GIER_P] = get_Value(cb_3_3); |
||
| 483 | ParameterSet[Set][P_EXTERNAL] = get_Value(cb_3_4); |
||
| 484 | |||
| 485 | // Seite 4 |
||
| 486 | ParameterSet[Set][P_MAXHOEHE] = get_Value(cb_4_1); |
||
| 487 | ParameterSet[Set][P_MIN_GAS] = sb_4_2->value(); |
||
| 488 | ParameterSet[Set][P_HOEHE_P] = get_Value(cb_4_3); |
||
| 489 | ParameterSet[Set][P_DRUCK_D] = get_Value(cb_4_4); |
||
| 490 | ParameterSet[Set][P_HOEHE_ACC] = get_Value(cb_4_5); |
||
| 491 | ParameterSet[Set][P_HOEHE_GAIN] = sb_4_6->value(); |
||
| 492 | |||
| 493 | // Seite 5 |
||
| 494 | ParameterSet[Set][P_GYRO_P] = get_Value(cb_5_1); |
||
| 495 | ParameterSet[Set][P_GYRO_I] = get_Value(cb_5_2); |
||
| 234 | KeyOz | 496 | ParameterSet[Set][P_GYRO_D] = get_Value(cb_5_8); |
| 167 | KeyOz | 497 | ParameterSet[Set][P_DYNAMIC_STAB] = get_Value(cb_5_3); |
| 498 | ParameterSet[Set][P_GYRO_ACC_FAKTOR] = sb_5_4->value(); |
||
| 499 | ParameterSet[Set][P_GYRO_ACC_ABGL] = sb_5_5->value(); |
||
| 500 | ParameterSet[Set][P_FAKTOR_I] = get_Value(cb_5_6); |
||
| 501 | ParameterSet[Set][P_DRIFT_KOMP] = sb_5_7->value(); |
||
| 502 | |||
| 503 | // Seite 6 |
||
| 504 | ParameterSet[Set][P_SERVO_NICK_CONT] = get_Value(cb_6_1); |
||
| 505 | ParameterSet[Set][P_SERVO_NICK_COMP] = sb_6_2->value(); |
||
| 506 | ParameterSet[Set][P_SERVO_NICK_MIN] = sb_6_3->value(); |
||
| 507 | ParameterSet[Set][P_SERVO_NICK_MAX] = sb_6_4->value(); |
||
| 508 | ParameterSet[Set][P_SERVO_NICK_REFR] = sb_6_5->value(); |
||
| 509 | ParameterSet[Set][P_SERVO_NICK_COMPI] = cb_6_6->isChecked(); |
||
| 510 | |||
| 511 | // Seite 7 |
||
| 512 | ParameterSet[Set][P_GAS_MIN] = sb_7_1->value(); |
||
| 513 | ParameterSet[Set][P_GAS_MAX] = sb_7_2->value(); |
||
| 514 | ParameterSet[Set][P_KOMPASS_WIRKUNG] = get_Value(cb_7_3); |
||
| 515 | ParameterSet[Set][P_UNTERSPANNUNG] = sb_7_4->value(); |
||
| 516 | ParameterSet[Set][P_NOTGASZEIT] = sb_7_5->value(); |
||
| 517 | ParameterSet[Set][P_NOTGAS] = sb_7_6->value(); |
||
| 518 | |||
| 519 | // Seite 8 |
||
| 234 | KeyOz | 520 | ParameterSet[Set][P_ACHS_KOPPLUNG1] = get_Value(cb_8_1); |
| 521 | ParameterSet[Set][P_ACHS_KOPPLUNG2] = get_Value(cb_8_2); |
||
| 522 | ParameterSet[Set][P_ACHS_GKOPPLUNG] = get_Value(cb_8_3); |
||
| 167 | KeyOz | 523 | |
| 524 | // Seite 9 |
||
| 525 | ParameterSet[Set][P_LOOP_CONFIG] = 0; |
||
| 526 | if (tb_9_6->text() == QString("1")) |
||
| 527 | ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] | 0x01; |
||
| 528 | if (tb_9_7->text() == QString("1")) |
||
| 529 | ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] | 0x02; |
||
| 530 | if (tb_9_8->text() == QString("1")) |
||
| 531 | ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] | 0x04; |
||
| 532 | if (tb_9_9->text() == QString("1")) |
||
| 533 | ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] | 0x08; |
||
| 337 | KeyOz | 534 | // if (cb_4_7->isChecked()) |
| 535 | // ParameterSet[Set][P_LOOP_CONFIG] = ParameterSet[Set][P_LOOP_CONFIG] | 0x10; |
||
| 167 | KeyOz | 536 | |
| 537 | ParameterSet[Set][P_LOOP_GAS_LIMIT] = get_Value(cb_9_1); |
||
| 538 | ParameterSet[Set][P_LOOP_THRESHOLD] = sb_9_2->value(); |
||
| 539 | ParameterSet[Set][P_WINKEL_NICK] = sb_9_3->value(); |
||
| 540 | ParameterSet[Set][P_LOOP_HYSTERESE] = sb_9_4->value(); |
||
| 541 | ParameterSet[Set][P_WINKEL_ROLL] = sb_9_5->value(); |
||
| 542 | |||
| 543 | // Seite 10 |
||
| 544 | ParameterSet[Set][P_USER_1] = get_Value(cb_10_1); |
||
| 545 | ParameterSet[Set][P_USER_2] = get_Value(cb_10_2); |
||
| 546 | ParameterSet[Set][P_USER_3] = get_Value(cb_10_3); |
||
| 547 | ParameterSet[Set][P_USER_4] = get_Value(cb_10_4); |
||
| 548 | ParameterSet[Set][P_USER_5] = get_Value(cb_10_5); |
||
| 549 | ParameterSet[Set][P_USER_6] = get_Value(cb_10_6); |
||
| 550 | ParameterSet[Set][P_USER_7] = get_Value(cb_10_7); |
||
| 551 | ParameterSet[Set][P_USER_8] = get_Value(cb_10_8); |
||
| 552 | |||
| 553 | // Seite 11 |
||
| 554 | ParameterSet[Set][P_J16_BITMASK] = sb_11_1->value(); |
||
| 555 | ParameterSet[Set][P_J16_TIMING] = get_Value(cb_11_2); |
||
| 556 | ParameterSet[Set][P_J17_BITMASK] = sb_11_3->value(); |
||
| 557 | ParameterSet[Set][P_J17_TIMING] = get_Value(cb_11_4); |
||
| 558 | |||
| 559 | // Seite 12 |
||
| 560 | ParameterSet[Set][P_NAV_GPS_MODE] = get_Value(cb_12_1); |
||
| 561 | ParameterSet[Set][P_NAV_GPS_GAIN] = get_Value(cb_12_2); |
||
| 562 | ParameterSet[Set][P_NAV_STICK_THRE] = sb_12_3->value(); |
||
| 563 | ParameterSet[Set][P_NAV_GPS_MIN] = sb_12_4->value(); |
||
| 564 | ParameterSet[Set][P_NAV_GPS_P] = get_Value(cb_12_5); |
||
| 565 | ParameterSet[Set][P_NAV_GPS_I] = get_Value(cb_12_6); |
||
| 566 | ParameterSet[Set][P_NAV_GPS_D] = get_Value(cb_12_7); |
||
| 567 | ParameterSet[Set][P_NAV_GPS_ACC] = get_Value(cb_12_8); |
||
| 234 | KeyOz | 568 | ParameterSet[Set][P_NAV_GPS_P_LIMIT] = get_Value(cb_12_9); |
| 569 | ParameterSet[Set][P_NAV_GPS_I_LIMIT] = get_Value(cb_12_10); |
||
| 570 | ParameterSet[Set][P_NAV_GPS_D_LIMIT] = get_Value(cb_12_11); |
||
| 167 | KeyOz | 571 | |
| 572 | //Seite 13 |
||
| 234 | KeyOz | 573 | ParameterSet[Set][P_NAV_WIND_CORR] = get_Value(cb_13_1); |
| 574 | ParameterSet[Set][P_NAV_SPEED_COMP] = get_Value(cb_13_2); |
||
| 575 | ParameterSet[Set][P_NAV_RADIUS] = get_Value(cb_13_3); |
||
| 576 | ParameterSet[Set][P_NAV_ANGLE_LIMIT] = get_Value(cb_13_4); |
||
| 577 | ParameterSet[Set][P_NAV_PH_LOGINTIME] = sb_13_5->value(); |
||
| 167 | KeyOz | 578 | } |
| 579 | |||
| 580 | void wdg_Settings::slot_SaveParameter() // DONE 0.71g |
||
| 581 | { |
||
| 582 | int Set = sb_Set->value() + 5; |
||
| 583 | |||
| 227 | KeyOz | 584 | QString Filename = QFileDialog::getSaveFileName(this, "Mikrokopter Parameter speichern", Config->DIR.Parameter + "" + le_SetName->text(), "Mikrokopter Parameter(*.mkp);;Alle Dateien (*)"); |
| 167 | KeyOz | 585 | |
| 586 | if (!Filename.isEmpty()) |
||
| 587 | { |
||
| 588 | if (!(Filename.endsWith(".mkp", Qt::CaseInsensitive))) |
||
| 589 | { |
||
| 590 | Filename = Filename + QString(".mkp"); |
||
| 591 | } |
||
| 592 | store_ParameterSet(Set); |
||
| 593 | |||
| 594 | QSettings Setting(Filename, QSettings::IniFormat); |
||
| 595 | |||
| 596 | Setting.beginGroup("Setup"); |
||
| 597 | Setting.setValue("Name", le_SetName->text()); |
||
| 598 | Setting.setValue("GlobalConfig", ParameterSet[Set][P_GLOBAL_CONF]); |
||
| 599 | Setting.endGroup(); |
||
| 600 | |||
| 601 | Setting.beginGroup("Channels"); |
||
| 602 | Setting.setValue("Nick", ParameterSet[Set][P_KANAL_NICK]); |
||
| 603 | Setting.setValue("Roll", ParameterSet[Set][P_KANAL_ROLL]); |
||
| 604 | Setting.setValue("Gas", ParameterSet[Set][P_KANAL_GAS]); |
||
| 605 | Setting.setValue("Gier", ParameterSet[Set][P_KANAL_GIER]); |
||
| 606 | Setting.setValue("Poti_1", ParameterSet[Set][P_KANAL_POTI1]); |
||
| 607 | Setting.setValue("Poti_2", ParameterSet[Set][P_KANAL_POTI2]); |
||
| 608 | Setting.setValue("Poti_3", ParameterSet[Set][P_KANAL_POTI3]); |
||
| 609 | Setting.setValue("Poti_4", ParameterSet[Set][P_KANAL_POTI4]); |
||
| 610 | Setting.endGroup(); |
||
| 611 | |||
| 612 | Setting.beginGroup("Stick"); |
||
| 613 | Setting.setValue("Nick_Roll-P", ParameterSet[Set][P_STICK_P]); |
||
| 614 | Setting.setValue("Nick_Roll-D", ParameterSet[Set][P_STICK_D]); |
||
| 615 | Setting.setValue("Gier-P", ParameterSet[Set][P_GIER_P]); |
||
| 616 | Setting.setValue("ExternalControl", ParameterSet[Set][P_EXTERNAL]); |
||
| 617 | Setting.endGroup(); |
||
| 618 | |||
| 619 | Setting.beginGroup("Altitude"); |
||
| 620 | Setting.setValue("Setpoint", ParameterSet[Set][P_MAXHOEHE]); |
||
| 621 | Setting.setValue("MinGas", ParameterSet[Set][P_MIN_GAS]); |
||
| 622 | Setting.setValue("P", ParameterSet[Set][P_HOEHE_P]); |
||
| 623 | Setting.setValue("Barometric-D", ParameterSet[Set][P_DRUCK_D]); |
||
| 624 | Setting.setValue("Z-ACC-Effect", ParameterSet[Set][P_HOEHE_ACC]); |
||
| 625 | Setting.setValue("Gain", ParameterSet[Set][P_HOEHE_GAIN]); |
||
| 626 | Setting.endGroup(); |
||
| 627 | |||
| 628 | Setting.beginGroup("Gyro"); |
||
| 629 | Setting.setValue("P", ParameterSet[Set][P_GYRO_P]); |
||
| 630 | Setting.setValue("I", ParameterSet[Set][P_GYRO_I]); |
||
| 631 | Setting.setValue("DynamicStability", ParameterSet[Set][P_DYNAMIC_STAB]); |
||
| 632 | Setting.setValue("ACC_Gyro-Factor", ParameterSet[Set][P_GYRO_ACC_FAKTOR]); |
||
| 633 | Setting.setValue("ACC_Gyro-Compensation", ParameterSet[Set][P_GYRO_ACC_ABGL]); |
||
| 634 | Setting.setValue("DriftCompensation", ParameterSet[Set][P_DRIFT_KOMP]); |
||
| 635 | Setting.setValue("Main-I", ParameterSet[Set][P_FAKTOR_I]); |
||
| 636 | Setting.endGroup(); |
||
| 637 | |||
| 638 | Setting.beginGroup("Camera"); |
||
| 639 | Setting.setValue("ServoNickControl", ParameterSet[Set][P_SERVO_NICK_CONT]); |
||
| 640 | Setting.setValue("ServoNickCompensation", ParameterSet[Set][P_SERVO_NICK_COMP]); |
||
| 641 | Setting.setValue("ServoNickInvert", ParameterSet[Set][P_SERVO_NICK_COMPI]); |
||
| 642 | Setting.setValue("ServoNickMin", ParameterSet[Set][P_SERVO_NICK_MIN]); |
||
| 643 | Setting.setValue("ServoNickMax", ParameterSet[Set][P_SERVO_NICK_MAX]); |
||
| 644 | Setting.setValue("ServoNickRefreshRate", ParameterSet[Set][P_SERVO_NICK_REFR]); |
||
| 645 | Setting.endGroup(); |
||
| 646 | |||
| 647 | Setting.beginGroup("Others"); |
||
| 648 | Setting.setValue("MinGas", ParameterSet[Set][P_GAS_MIN]); |
||
| 649 | Setting.setValue("MaxGas", ParameterSet[Set][P_GAS_MAX]); |
||
| 650 | Setting.setValue("Compass-Effect", ParameterSet[Set][P_KOMPASS_WIRKUNG]); |
||
| 651 | Setting.setValue("UnderVoltage", ParameterSet[Set][P_UNTERSPANNUNG]); |
||
| 652 | Setting.setValue("NotGas", ParameterSet[Set][P_NOTGAS]); |
||
| 653 | Setting.setValue("NotGasTime", ParameterSet[Set][P_NOTGASZEIT]); |
||
| 654 | Setting.endGroup(); |
||
| 655 | |||
| 656 | Setting.beginGroup("Coupling"); |
||
| 234 | KeyOz | 657 | Setting.setValue("YawPosFeedback", ParameterSet[Set][P_ACHS_KOPPLUNG1]); |
| 167 | KeyOz | 658 | Setting.setValue("YawNegFeedback", ParameterSet[Set][P_ACHS_GKOPPLUNG]); |
| 659 | Setting.endGroup(); |
||
| 660 | |||
| 661 | Setting.beginGroup("Loop"); |
||
| 662 | Setting.setValue("Config", ParameterSet[Set][P_LOOP_CONFIG]); |
||
| 663 | Setting.setValue("GasLimit", ParameterSet[Set][P_LOOP_GAS_LIMIT]); |
||
| 664 | Setting.setValue("StickThreshold", ParameterSet[Set][P_LOOP_THRESHOLD]); |
||
| 665 | Setting.setValue("LoopHysteresis", ParameterSet[Set][P_LOOP_HYSTERESE]); |
||
| 666 | Setting.setValue("TurnOverNick", ParameterSet[Set][P_WINKEL_NICK]); |
||
| 667 | Setting.setValue("TurnOverRoll", ParameterSet[Set][P_WINKEL_ROLL]); |
||
| 668 | Setting.endGroup(); |
||
| 669 | |||
| 670 | Setting.beginGroup("User"); |
||
| 671 | Setting.setValue("Parameter_1", ParameterSet[Set][P_USER_1]); |
||
| 672 | Setting.setValue("Parameter_2", ParameterSet[Set][P_USER_2]); |
||
| 673 | Setting.setValue("Parameter_3", ParameterSet[Set][P_USER_3]); |
||
| 674 | Setting.setValue("Parameter_4", ParameterSet[Set][P_USER_4]); |
||
| 675 | Setting.setValue("Parameter_5", ParameterSet[Set][P_USER_5]); |
||
| 676 | Setting.setValue("Parameter_6", ParameterSet[Set][P_USER_6]); |
||
| 677 | Setting.setValue("Parameter_7", ParameterSet[Set][P_USER_7]); |
||
| 678 | Setting.setValue("Parameter_8", ParameterSet[Set][P_USER_8]); |
||
| 679 | Setting.endGroup(); |
||
| 680 | |||
| 681 | Setting.beginGroup("Output"); |
||
| 682 | Setting.setValue("J16_Bitmask", ParameterSet[Set][P_J16_BITMASK]); |
||
| 683 | Setting.setValue("J16_Timing", ParameterSet[Set][P_J16_TIMING]); |
||
| 684 | Setting.setValue("J17_Bitmask", ParameterSet[Set][P_J17_BITMASK]); |
||
| 685 | Setting.setValue("J17_Timing", ParameterSet[Set][P_J17_TIMING]); |
||
| 686 | Setting.endGroup(); |
||
| 687 | |||
| 688 | Setting.beginGroup("NaviCtrl"); |
||
| 689 | Setting.setValue("GPS_ModeControl", ParameterSet[Set][P_NAV_GPS_MODE]); |
||
| 690 | Setting.setValue("GPS_Gain", ParameterSet[Set][P_NAV_GPS_GAIN]); |
||
| 691 | Setting.setValue("GPS_P", ParameterSet[Set][P_NAV_GPS_P]); |
||
| 692 | Setting.setValue("GPS_I", ParameterSet[Set][P_NAV_GPS_I]); |
||
| 693 | Setting.setValue("GPS_D", ParameterSet[Set][P_NAV_GPS_D]); |
||
| 694 | Setting.setValue("GPS_Acc", ParameterSet[Set][P_NAV_GPS_ACC]); |
||
| 695 | Setting.setValue("GPS_MinSat", ParameterSet[Set][P_NAV_GPS_MIN]); |
||
| 696 | Setting.setValue("GPS_StickThreshold", ParameterSet[Set][P_NAV_STICK_THRE]); |
||
| 697 | Setting.setValue("GPS_WindCorrection", ParameterSet[Set][P_NAV_WIND_CORR]); |
||
| 698 | Setting.setValue("GPS_SpeedCompensation", ParameterSet[Set][P_NAV_SPEED_COMP]); |
||
| 699 | Setting.setValue("GPS_MaxRadius", ParameterSet[Set][P_NAV_RADIUS]); |
||
| 199 | KeyOz | 700 | Setting.setValue("GPS_AngleLimit", ParameterSet[Set][P_NAV_ANGLE_LIMIT]); |
| 167 | KeyOz | 701 | Setting.endGroup(); |
| 702 | } |
||
| 703 | } |
||
| 704 | |||
| 199 | KeyOz | 705 | char *wdg_Settings::GetFCSettings() // DONE 0.71g |
| 167 | KeyOz | 706 | { |
| 707 | store_ParameterSet(sb_Set->value()); |
||
| 708 | |||
| 709 | char *TX_Data = new char[150]; |
||
| 710 | |||
| 711 | TX_Data[0] = sb_Set->value(); |
||
| 712 | TX_Data[1] = VERSION_SETTINGS; |
||
| 713 | |||
| 714 | for (int a = 0; a < MaxParameter; a++) |
||
| 715 | { |
||
| 716 | TX_Data[a + 2] = ParameterSet[sb_Set->value()][a]; |
||
| 717 | } |
||
| 718 | |||
| 719 | return TX_Data; |
||
| 720 | |||
| 721 | // store_ParameterSet(sb_Set->value()); |
||
| 722 | |||
| 723 | // send_Data('s', ADDRESS_FC, TX_Data, MaxParameter + 2, false); |
||
| 724 | } |
||
| 725 | |||
| 726 | QComboBox *wdg_Settings::setCombo(QComboBox *Combo, int Set, int Wert) |
||
| 727 | { |
||
| 728 | Set = Set; |
||
| 729 | |||
| 199 | KeyOz | 730 | if (Wert <= 250) |
| 167 | KeyOz | 731 | { |
| 199 | KeyOz | 732 | Combo->setItemText(4, QString("%1").arg(Wert)); |
| 167 | KeyOz | 733 | Combo->setCurrentIndex(4); |
| 734 | } |
||
| 735 | else |
||
| 736 | { |
||
| 199 | KeyOz | 737 | Combo->setCurrentIndex(Wert - 251); |
| 167 | KeyOz | 738 | } |
| 739 | return Combo; |
||
| 740 | } |
||
| 741 | |||
| 199 | KeyOz | 742 | void wdg_Settings::show_FCSettings(int Set, int FCSettings[MaxParameter]) // DONE 0.71h |
| 167 | KeyOz | 743 | { |
| 199 | KeyOz | 744 | memcpy(Settings, FCSettings, sizeof(FCSettings)); |
| 167 | KeyOz | 745 | |
| 199 | KeyOz | 746 | memcpy(ParameterSet[Set], FCSettings, sizeof(FCSettings)); |
| 167 | KeyOz | 747 | |
| 748 | sb_Set->setValue(Set); |
||
| 749 | |||
| 750 | char Name[12]; |
||
| 751 | for (int a = 0; a < 12; a++) |
||
| 752 | { |
||
| 199 | KeyOz | 753 | Name[a] = FCSettings[P_NAME+a]; |
| 167 | KeyOz | 754 | } |
| 755 | le_SetName->setText(QString(Name)); |
||
| 756 | |||
| 227 | KeyOz | 757 | |
| 167 | KeyOz | 758 | // Seite 1 |
| 759 | { |
||
| 199 | KeyOz | 760 | cb_1_1->setChecked(FCSettings[P_GLOBAL_CONF] & 0x01); |
| 761 | cb_1_2->setChecked(FCSettings[P_GLOBAL_CONF] & 0x02); |
||
| 762 | cb_1_3->setChecked(FCSettings[P_GLOBAL_CONF] & 0x04); |
||
| 763 | cb_1_4->setChecked(FCSettings[P_GLOBAL_CONF] & 0x08); |
||
| 764 | cb_1_5->setChecked(FCSettings[P_GLOBAL_CONF] & 0x10); |
||
| 765 | cb_1_6->setChecked(FCSettings[P_GLOBAL_CONF] & 0x20); |
||
| 766 | cb_1_7->setChecked(FCSettings[P_GLOBAL_CONF] & 0x40); |
||
| 767 | cb_1_8->setChecked(FCSettings[P_GLOBAL_CONF] & 0x80); |
||
| 167 | KeyOz | 768 | } |
| 769 | // Seite 2 |
||
| 770 | { |
||
| 199 | KeyOz | 771 | sb_2_1->setValue(FCSettings[P_KANAL_NICK]); |
| 772 | sb_2_2->setValue(FCSettings[P_KANAL_ROLL]); |
||
| 773 | sb_2_3->setValue(FCSettings[P_KANAL_GAS]); |
||
| 774 | sb_2_4->setValue(FCSettings[P_KANAL_GIER]); |
||
| 775 | sb_2_5->setValue(FCSettings[P_KANAL_POTI1]); |
||
| 776 | sb_2_6->setValue(FCSettings[P_KANAL_POTI2]); |
||
| 777 | sb_2_7->setValue(FCSettings[P_KANAL_POTI3]); |
||
| 778 | sb_2_8->setValue(FCSettings[P_KANAL_POTI4]); |
||
| 167 | KeyOz | 779 | } |
| 780 | // Seite 3 |
||
| 781 | { |
||
| 199 | KeyOz | 782 | sb_3_1->setValue(FCSettings[P_STICK_P]); |
| 783 | sb_3_2->setValue(FCSettings[P_STICK_D]); |
||
| 784 | cb_3_3 = setCombo(cb_3_3, Set, FCSettings[P_GIER_P]); |
||
| 785 | cb_3_4 = setCombo(cb_3_4, Set, FCSettings[P_EXTERNAL]); |
||
| 167 | KeyOz | 786 | } |
| 787 | // Seite 4 |
||
| 788 | { |
||
| 199 | KeyOz | 789 | cb_4_1 = setCombo(cb_4_1, Set, FCSettings[P_MAXHOEHE]); |
| 790 | sb_4_2->setValue(FCSettings[P_MIN_GAS]); |
||
| 791 | cb_4_3 = setCombo(cb_4_3, Set, FCSettings[P_HOEHE_P]); |
||
| 792 | cb_4_4 = setCombo(cb_4_4, Set, FCSettings[P_DRUCK_D]); |
||
| 793 | cb_4_5 = setCombo(cb_4_5, Set, FCSettings[P_HOEHE_ACC]); |
||
| 794 | sb_4_6->setValue(FCSettings[P_HOEHE_GAIN]); |
||
| 337 | KeyOz | 795 | // cb_4_7->setChecked(FCSettings[P_LOOP_CONFIG] & 0x10); |
| 167 | KeyOz | 796 | } |
| 797 | // Seite 5 |
||
| 798 | { |
||
| 199 | KeyOz | 799 | cb_5_1 = setCombo(cb_5_1, Set, FCSettings[P_GYRO_P]); |
| 800 | cb_5_2 = setCombo(cb_5_2, Set, FCSettings[P_GYRO_I]); |
||
| 234 | KeyOz | 801 | cb_5_8 = setCombo(cb_5_8, Set, FCSettings[P_GYRO_D]); |
| 199 | KeyOz | 802 | cb_5_3 = setCombo(cb_5_3, Set, FCSettings[P_DYNAMIC_STAB]); |
| 803 | sb_5_4->setValue(FCSettings[P_GYRO_ACC_FAKTOR]); |
||
| 804 | sb_5_5->setValue(FCSettings[P_GYRO_ACC_ABGL]); |
||
| 805 | cb_5_6 = setCombo(cb_5_6, Set, FCSettings[P_FAKTOR_I]); |
||
| 806 | sb_5_7->setValue(FCSettings[P_DRIFT_KOMP]); |
||
| 167 | KeyOz | 807 | } |
| 808 | // Seite 6 |
||
| 809 | { |
||
| 199 | KeyOz | 810 | cb_6_1 = setCombo(cb_6_1, Set, FCSettings[P_SERVO_NICK_CONT]); |
| 811 | sb_6_2->setValue(FCSettings[P_SERVO_NICK_COMP]); |
||
| 812 | sb_6_3->setValue(FCSettings[P_SERVO_NICK_MIN]); |
||
| 813 | sb_6_4->setValue(FCSettings[P_SERVO_NICK_MAX]); |
||
| 814 | sb_6_5->setValue(FCSettings[P_SERVO_NICK_REFR]); |
||
| 815 | cb_6_6->setChecked(FCSettings[P_SERVO_NICK_COMPI]); |
||
| 167 | KeyOz | 816 | } |
| 817 | // Seite 7 |
||
| 818 | { |
||
| 199 | KeyOz | 819 | sb_7_1->setValue(FCSettings[P_GAS_MIN]); |
| 820 | sb_7_2->setValue(FCSettings[P_GAS_MAX]); |
||
| 821 | cb_7_3 = setCombo(cb_7_3, Set, FCSettings[P_KOMPASS_WIRKUNG]); |
||
| 822 | sb_7_4->setValue(FCSettings[P_UNTERSPANNUNG]); |
||
| 823 | sb_7_5->setValue(FCSettings[P_NOTGASZEIT]); |
||
| 824 | sb_7_6->setValue(FCSettings[P_NOTGAS]); |
||
| 167 | KeyOz | 825 | } |
| 826 | // Seite 8 |
||
| 827 | { |
||
| 234 | KeyOz | 828 | cb_8_1 = setCombo(cb_8_1, Set, FCSettings[P_ACHS_KOPPLUNG1]); |
| 829 | cb_8_2 = setCombo(cb_8_2, Set, FCSettings[P_ACHS_KOPPLUNG2]); |
||
| 830 | cb_8_3 = setCombo(cb_8_3, Set, FCSettings[P_ACHS_GKOPPLUNG]); |
||
| 167 | KeyOz | 831 | } |
| 832 | // Seite 9 |
||
| 833 | { |
||
| 199 | KeyOz | 834 | if (FCSettings[P_LOOP_CONFIG] & 0x01) |
| 167 | KeyOz | 835 | { |
| 836 | tb_9_6->setText("1"); |
||
| 227 | KeyOz | 837 | tb_9_6->setChecked(true); |
| 167 | KeyOz | 838 | } |
| 839 | else |
||
| 840 | { |
||
| 841 | tb_9_6->setText("0"); |
||
| 227 | KeyOz | 842 | tb_9_6->setChecked(false); |
| 167 | KeyOz | 843 | } |
| 844 | |||
| 199 | KeyOz | 845 | if (FCSettings[P_LOOP_CONFIG] & 0x02) |
| 167 | KeyOz | 846 | { |
| 847 | tb_9_7->setText("1"); |
||
| 848 | } |
||
| 849 | else |
||
| 850 | { |
||
| 851 | tb_9_7->setText("0"); |
||
| 852 | } |
||
| 853 | |||
| 199 | KeyOz | 854 | if (FCSettings[P_LOOP_CONFIG] & 0x04) |
| 167 | KeyOz | 855 | { |
| 856 | tb_9_8->setText("1"); |
||
| 857 | } |
||
| 858 | else |
||
| 859 | { |
||
| 860 | tb_9_8->setText("0"); |
||
| 861 | } |
||
| 862 | |||
| 199 | KeyOz | 863 | if (FCSettings[P_LOOP_CONFIG] & 0x08) |
| 167 | KeyOz | 864 | { |
| 865 | tb_9_9->setText("1"); |
||
| 866 | } |
||
| 867 | else |
||
| 868 | { |
||
| 869 | tb_9_9->setText("0"); |
||
| 870 | } |
||
| 871 | |||
| 199 | KeyOz | 872 | cb_9_1 = setCombo(cb_9_1, Set, FCSettings[P_LOOP_GAS_LIMIT]); |
| 873 | sb_9_2->setValue(FCSettings[P_LOOP_THRESHOLD]); |
||
| 874 | sb_9_3->setValue(FCSettings[P_WINKEL_NICK]); |
||
| 875 | sb_9_4->setValue(FCSettings[P_LOOP_HYSTERESE]); |
||
| 876 | sb_9_5->setValue(FCSettings[P_WINKEL_ROLL]); |
||
| 167 | KeyOz | 877 | } |
| 878 | // Seite 10 |
||
| 879 | { |
||
| 199 | KeyOz | 880 | cb_10_1 = setCombo(cb_10_1, Set, FCSettings[P_USER_1]); |
| 881 | cb_10_2 = setCombo(cb_10_2, Set, FCSettings[P_USER_2]); |
||
| 882 | cb_10_3 = setCombo(cb_10_3, Set, FCSettings[P_USER_3]); |
||
| 883 | cb_10_4 = setCombo(cb_10_4, Set, FCSettings[P_USER_4]); |
||
| 884 | cb_10_5 = setCombo(cb_10_5, Set, FCSettings[P_USER_5]); |
||
| 885 | cb_10_6 = setCombo(cb_10_6, Set, FCSettings[P_USER_6]); |
||
| 886 | cb_10_7 = setCombo(cb_10_7, Set, FCSettings[P_USER_7]); |
||
| 887 | cb_10_8 = setCombo(cb_10_8, Set, FCSettings[P_USER_8]); |
||
| 167 | KeyOz | 888 | } |
| 889 | // Seite 11 |
||
| 890 | { |
||
| 199 | KeyOz | 891 | sb_11_1->setValue(FCSettings[P_J16_BITMASK]); |
| 892 | cb_11_2 = setCombo(cb_11_2, Set, FCSettings[P_J16_TIMING]); |
||
| 893 | sb_11_3->setValue(FCSettings[P_J17_BITMASK]); |
||
| 894 | cb_11_4 = setCombo(cb_11_4, Set, FCSettings[P_J17_TIMING]); |
||
| 167 | KeyOz | 895 | } |
| 896 | // Seite 12 |
||
| 897 | { |
||
| 199 | KeyOz | 898 | cb_12_1 = setCombo(cb_12_1, Set, FCSettings[P_NAV_GPS_MODE]); |
| 899 | cb_12_2 = setCombo(cb_12_2, Set, FCSettings[P_NAV_GPS_GAIN]); |
||
| 900 | sb_12_3->setValue(FCSettings[P_NAV_STICK_THRE]); |
||
| 901 | sb_12_4->setValue(FCSettings[P_NAV_GPS_MIN]); |
||
| 902 | cb_12_5 = setCombo(cb_12_5, Set, FCSettings[P_NAV_GPS_P]); |
||
| 903 | cb_12_6 = setCombo(cb_12_6, Set, FCSettings[P_NAV_GPS_I]); |
||
| 904 | cb_12_7 = setCombo(cb_12_7, Set, FCSettings[P_NAV_GPS_D]); |
||
| 905 | cb_12_8 = setCombo(cb_12_8, Set, FCSettings[P_NAV_GPS_ACC]); |
||
| 234 | KeyOz | 906 | cb_12_9 = setCombo(cb_12_9, Set, FCSettings[P_NAV_GPS_P_LIMIT]); |
| 907 | cb_12_10 = setCombo(cb_12_10, Set, FCSettings[P_NAV_GPS_I_LIMIT]); |
||
| 908 | cb_12_11 = setCombo(cb_12_11, Set, FCSettings[P_NAV_GPS_D_LIMIT]); |
||
| 167 | KeyOz | 909 | } |
| 910 | // Seite 13 |
||
| 911 | { |
||
| 199 | KeyOz | 912 | cb_13_1 = setCombo(cb_13_1, Set, FCSettings[P_NAV_WIND_CORR]); |
| 913 | cb_13_2 = setCombo(cb_13_2, Set, FCSettings[P_NAV_SPEED_COMP]); |
||
| 914 | cb_13_3 = setCombo(cb_13_3, Set, FCSettings[P_NAV_RADIUS]); |
||
| 915 | cb_13_4 = setCombo(cb_13_4, Set, FCSettings[P_NAV_ANGLE_LIMIT]); |
||
| 234 | KeyOz | 916 | sb_13_5->setValue(FCSettings[P_NAV_PH_LOGINTIME]); |
| 167 | KeyOz | 917 | } |
| 918 | } |
||
| 919 | |||
| 920 | wdg_Settings::~wdg_Settings() |
||
| 921 | { |
||
| 922 | } |
||
| 923 |