Subversion Repositories Projects

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
835 4881 d 0 h /C-OSD/trunk/ *increased buffer so the new config struct really fits (fixes garbage after setting name)
*fixed GPS-blink on startup
*re-enable some ascii-char mappings (some people do have underscores in their setting-names)
 
833 4882 d 0 h /C-OSD/trunk/ *inserted missing new value in config-struct. should fix setting-name.  
832 4882 d 14 h /C-OSD/trunk/ *updated structs and flags to fit FC 0.80a && NC 0.20a
*sat-icon will blink when not enough sats are found (nc_mode_default)
 
826 4920 d 13 h /C-OSD/trunk/ *fixed EPi-Strom voltage-display when using FC-Ampere
*added passive option: OSD will NOT request data after bootup
 
809 4949 d 23 h /C-OSD/trunk/ *fixed height-offset causing different height values in OSD compared to MK-Tool when using baro-height (thx Neo360)  
800 4966 d 23 h /C-OSD/trunk/ *removed debug-leftover in ppm.c (thx OktoMac)
*made number display-routines more stable when big numbers occur
 
787 4986 d 19 h /C-OSD/trunk/ *removed constantly requests for the NC Uart in NC mode which caused problems when using OSD/MKTool at the same time  
783 4990 d 9 h /C-OSD/trunk/ *added current setting display
*updated structs for FC 0.80 and NC 0.20 (old version will still work, just cosmetics)
*battery warn level now _can_ be taken from the FC-Settings
*corrected some defines so FC stuff is only in FC Builds and NC stuff only in NC builds
 
772 5019 d 5 h /C-OSD/trunk/ *hopefully fixed altimeter-stats
*some basic antenna tracking insertion for others to test
 
767 5037 d 0 h /C-OSD/trunk/ *back to future :)  
766 5037 d 0 h /C-OSD/trunk/ *corrected heigth-division-factor when using baro-height  
762 5050 d 7 h /C-OSD/trunk/ *fixed bug in stats when max-distance > 999m  
761 5080 d 11 h /C-OSD/trunk/ *distance to home now 4 digits for long distance flights
*max height and speed shown again in stats
*clear full screen before stats shown so the art-horizon does not bug us
@some code formatting
 
758 5092 d 22 h cascade /C-OSD/trunk/ *fixed bug causing PPM-based display on/off to fail
*fixed display of AGRESSiVA-horizion during motor run
 
757 5099 d 1 h cascade /C-OSD/trunk/ *added mph/ft (two new chars added, reflash characters if you need ft/mph)
*AGRESSiVA-horizion now switchable via menu
*reworked menu a bit
*switched from -O2 to -Os because of the added stuff
 
753 5108 d 21 h cascade /C-OSD/trunk/ *RC-RSSI now shown if available (RC_Quality is still fallback, still needs FC patch)
+AGRESSiVA-horizion to main trunk (NEW_ARTHORIZON 1 to test, needs new chars)
+chars needed for above mod to chars.mcm and chars.c
 
738 5151 d 22 h cascade /C-OSD/trunk/ *hopefully fixed the laggy osd data problem
-send_data_mk has been striked out to save space
@nc-mode should be small enough for bootloader again ( Program: 14986 bytes (91.5% Full) )
 
736 5154 d 7 h cascade /C-OSD/trunk/ *some menu stuff
*stats in nc_default do not disturb the bigvario anymore
*reduced code size from 16088 bytes (98.2% Full) 15436 bytes (94.2% Full)
 
734 5156 d 5 h cascade /C-OSD/trunk/ +mah wasted per flight (still counts up after landing, but space gets tight)
*init phase from 2000ms to 3000ms
*init only takes place after first "valid" UBat is received (<4V should case the Mega to reset anyways)
 
728 5157 d 22 h cascade /C-OSD/trunk/ adapted MK-datastructs to NC 0.18c
added choice for current display measured by FC
 
685 5253 d 11 h cascade /C-OSD/trunk/ +fc-only mode by Josef "jopl" Plasil (MK3Mag on FC and no NC)
*usart1 routine to filter out unwanted datasets (also big thanks to jopl)
 
677 5259 d 23 h cascade /C-OSD/trunk/ +nc/fc software version display in bootup
*changed checkbytes because of previously removed EEPROM data
 
675 5262 d 23 h cascade /C-OSD/trunk/ *synced NaviStruct to NC Code v0.17e
(since nothing of the new stuff is used right now, older NC version will still work)
 
528 5371 d 2 h cascade /C-OSD/trunk/ *fixed the flags (hopefully) for C-Strom and stuff  
523 5379 d 3 h cascade /C-OSD/trunk/ *hopefully fixed the new 10th number showing functions
+support for GPS height instead of Baro
 
519 5382 d 22 h cascade /C-OSD/trunk/ *write-number-functions changed, using itoa now, saves space, should be faster
*inline added for basic max7456-spi_send because saves procedure call (^= time)
 
514 5388 d 8 h cascade /C-OSD/trunk/ *ALL characters now in Progmem, from now on there will be only ONE char-file!  
508 5403 d 2 h cascade /C-OSD/trunk/ *spi transfer now struct driven (needs C-Strom 20090612-2100 now!!!)
*lesser spi update rate (caused problems on some strom-slaves)
*voltage gets transfered via spi as well
*menu to switch display of 2nd voltage measured by C-Strom on and off
 
507 5403 d 2 h cascade /C-OSD/trunk/ *spi transfer now struct driven
*lesser spi update rate (caused problems on some strom-slaves)
*voltage gets transfered via spi as well
*menu to switch display of 2nd voltage measured by C-Strom on and off
 
499 5411 d 9 h cascade /C-OSD/trunk/ *bugfix for stats  
497 5411 d 9 h cascade /C-OSD/trunk/ *possible to choose between different osd-layouts (via menu)  
489 5413 d 3 h woggle /C-OSD/trunk/ more precise timer, move more data to PROGMEM, remove warnings  
478 5420 d 23 h cascade /C-OSD/trunk/ *damn dates...  
477 5420 d 23 h cascade /C-OSD/trunk/ +HUD on/off via RC (connect to PPM, according to manual) testing stuff  
474 5423 d 11 h cascade /C-OSD/trunk/ +pal/ntsc changable in menu (applied immedeately!)  
471 5426 d 23 h cascade /C-OSD/trunk/ *mah corrected
+config gets saved now (menu item!)
*source moved a bit
 
468 5427 d 21 h cascade /C-OSD/trunk/ +mah currently wasted
*some small changes
 
467 5428 d 23 h cascade /C-OSD/trunk/ *modded the real alpha stuff i have been talking about below  
465 5429 d 23 h cascade /C-OSD/trunk/ +some really testing stuff 'bout current measurement, more to come  
459 5432 d 23 h cascade /C-OSD/trunk/ *osd-layouts in seperate files so including own layouts should get easier
+build date is displayed during init to know which version you are runing