Subversion Repositories NaviCtrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
477 3801 d 20 h holgerb /tags/V2.00e/ Version 2.00e  
459 3931 d 20 h holgerb /tags/V2.00a/ 2.00 (after public beta V0.31i)
- Messure of Navigation Update speed (in 0.1Hz)
- GPX-Tags <NaviUpdate>
- Virtual display no. 21 added
- Failsafe-Speed is the Setting of Autolanding
- SpeakHott while compass calibration "calibrate", "calibrate", "MikroKopter" or "Error: Calibration"
- Report KopterTool if MK3Mag and MKGPS is connected
- Fixed: ComingHome with distances > GPS-Range reported "ERR:25:MAX-Range" (only the message)
- Fixed: Waypoint flight were 10% too fast
- Better WindCorrection for Waypoint flights
- MIN_SD_INTERVAL_GPX reduced to 200
- NC-Params for WP-Event-Test
 
452 4012 d 15 h holgerb /tags/V0.30h/ 0.30h
- Better handling of write-errors to the SD-Card
- EnableNewWpHeading() -> enables new Heading when the "S" command comes
 
449 4026 d 16 h holgerb /tags/V0.30g/ 0.30g:
Changes for the new ACC-Altitude control
 
446 4066 d 14 h holgerb /tags/V0.30b/Hex-Files/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
445 4066 d 14 h holgerb /tags/V0.30b/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
444 4066 d 14 h holgerb /tags/V0.30b/Hex-Files/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
443 4066 d 14 h holgerb /tags/V0.30b/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
442 4066 d 14 h holgerb /tags/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
441 4066 d 14 h holgerb /tags/ 0.30b: Schnelles Umschalten des GPS-Modes wenn man den Schalter umlegt  
439 4074 d 20 h holgerb /tags/V0.30a/ 1. Automatic camera trigger:
1.1 You can use the switch and WP event simultaneously. So you can also manually trigger the camera if you use the Waypoint-Event Channel
1.2 Photo-triggering in distance intervals. In the FC-Settings you can set a distance interval for Phototriggers. As example, the MK could take all 10m a picture on manual flight. Indipendant on the flying speed. So you can photograph the field, or track, without planning it by waypoints.
1.3 WP-event: the flashing pattern will be executed at least 1 complete pattern

2. Logging
2.1 The KopterTool itself can now also create GPX log files (only in the OSD window) -> Additional Security
2.2 Changed the name of the log files on the SD card (date in the name of the log file eg 12112201.GPX for the first flight on 22/11/2012).
2.3 Changing the order of log entries and added some more data points <FC_SPI_ErrorCounter> <Speak>
2.4 Fix: I2C error in the log were always zero
2.5 Starting log file without GPS-FIX (but GPS date must be available)
2.6 bugfix: log was stopped when loosing the GPS-Fix
2.7 write logfile 2,5seconds longer after switching off the motors
2.8 write the SD-FAT when an Error accures

3. Jeti
Extended-Jeti protocol implemented (for example, the new Jeti transmitter DC16 etc)
MikroKopter-Messages are transmitted via the morse-codes. In the new Jeti-Transmitters a voice-file can be assigned to each code.
For old transmitters the morse-codes can be deactivated via the KopterTool.

4. Waypoint flights
4.1 Display WP x / y in the HoTT telemetry
4.2 Spontaneous acceleration in WP-flight. So the waypoint flight is faster and more accurate. Flights with 12-15m/s are now possible
4.3 BugFix: If direction is fixed (eg 180 °) and yawed manually, then the next time the WP angle only set when the setpoint changes

5. SD card access via KopterTool
5.1 Per KopterTool you can then download the log files - even via a radio link.
5.2 SETTINGS.INI can be changed with the KopterTool without removing the SD card
5.3 We will add a "Simple GPX-Viever" to the KopterTool-Package later.

6. Camera-angle
The camera-angle can be moved via a stick with neutral position. The user just controls UP/Down instead of the absolut angle.
Very slow movements are possible with that feature.

7. misc
7.1 RC-Lost at starting point (within 40m and 15m altitude) will not trigger the failsafe-function when the Gas stick was down for 1,5sec before failsafe accured
the MK was propably manually landed in that case and the user switched off the transmitter). The MK switches to MIN-Gas instead.
7.2 Fix: in PH with slow yawing the MK sometimes flew in large circles
7.3 HoTT:Text-Menu "Speak All" removed. This can be selected in the KopterTool now.
7.4 KopterTool: Warning if a setting is changed, but not transmitted to the MK
7.5 Bugfix: the message of defective Gyros was too short
 
425 4184 d 16 h ingob /tags/V0.28p/Hex-Files/ 0.28p (Bugfix 22.11.2012)
- FC_I2C_ErrorConter im Logfile war immer Null
- Start Logfile schon bei 3 Satelliten
 
424 4184 d 16 h ingob /tags/V0.28p/Hex-Files/  
423 4184 d 16 h ingob /tags/V0.28p/  
412 4310 d 21 h holgerb /tags/V0.28o/ 0.28o (Bugfix 18.07.2012)
- Fix for HoTT-Display: The negative value (Southern hemisphere) was not shown correctly on the HoTT-TElemety and the Compass-Value was shown as 2° then
 
411 4310 d 21 h holgerb /tags/V0.28o/ alte FAT von 0.28m  
410 4310 d 21 h holgerb /tags/V0.28o/Hex-Files/ alte FAT von 0.28m  
409 4310 d 21 h holgerb /tags/V0.28o/Hex-Files/ alte FAT von 0.28m  
406 4310 d 21 h holgerb /tags/V0.28o/ 0.28o (Bugfix 18.07.2012)
- Fix for HoTT-Display: The negative value (Southern hemisphere) was not shown correctly on the HoTT-TElemety and the Compass-Value was shown as 2° then
 
404 4327 d 21 h holgerb /tags/V0.28n/ 0.28n Follow-ME-Bugfix: Camera angle was wrong.
Needs also the Follow-Me-Transmitter in Version 0.28n
 
402 4374 d 21 h ingob /tags/V0.28m/Hex-Files/  
401 4374 d 21 h holgerb /tags/V0.28m/ Graupner HoTT V4 update of the 0.28
0.28M HoTT V4 (15.05.2012)
- HoTT V4 implemented
- Support for slow SD-Cards (1MBit/s)
 
393 4422 d 18 h holgerb /tags/V0.28i/ +++++ SVN-Text +++++
0.28 (12.12.2011 - 26.03.2012)
- Autolandung bei Failsafe
- Speed zwischen Wegpunkten
- Camera-Nick bei Wegpunkten
- 100 Wegpunkte bei commercial Lizenz
- GPX: WP 2/10, FC_WP_EventChannel, Servo-Werte
- "ERR:SD Logging aborted" und "No SD-card"
- Abo-Timeout auf 8 Sekunden erhöht
- ABSOLUTE_FLYING_RANGE und DESCEND_RANGE eingebaut
- Leerzeichen aus dem KML-Log entfernt, damit Google-Earth die Höhe wieder richtig liest
- Speed zwischen den Punkten:
- 0 = spontan
- Poti1-8
- "Max Altitude" als Parameter auf der SD-Karte im Navi -> Beeinflusst "Parameter_MaximumAltitude" (das niedrigste gilt) und es gibt eine Fehlermeldung "ERR:Max Altitude"
- Minimalzeit für Waypoint Event in der Settings.INI einstellbar MIN_EVENT_TIME = 2
- Neuer Parameter: GPS_SBAS_DGPS_ON = 1
- SPI-Protokoll: BL.Status eingefügt und Parameter.GlobalConfig & Parameter.ExtraConfig verschoben
- Neue Datensätze: BL-Strom & Temperatur in Datensatz 'K' & Kanäle im 3D-Datensatz
- SD-Logging: Timeouts eingeführt
- Unterstützung für GPS-Module mit SW-Version 7
- Name des Waypoints im GPX-File
- SD-Karten-Speed auf 2MBit/s erhöht
- Fat16: fflush() und AppendCluster() überarbeitet
- Kommentare in der Settings.ini
- unterdrückt Magnet-Error nach Kalibrieren für 2 Sekunden
- Namen der Waypoints loggen

0.28i Bugfixes (29.03.2012)
- MK3Mag schaltet bei Kalibrieren nicht aus Step 5 raus
- Menüpunkt 19 wurde nicht angezeigt
- Waypoint mit Speed-Vorgabe erreichte in Australien nicht den Punkt
 
390 4425 d 16 h holgerb /tags/V0.28h/ 0.28 (12.12.2011 - 26.03.2012)
- Autolandung bei Failsafe
- Speed zwischen Wegpunkten
- Camera-Nick bei Wegpunkten
- 100 Wegpunkte bei commercial Lizenz
- GPX: WP 2/10, FC_WP_EventChannel, Servo-Werte
- "ERR:SD Logging aborted" und "No SD-card"
- Abo-Timeout auf 8 Sekunden erhöht
- ABSOLUTE_FLYING_RANGE und DESCEND_RANGE eingebaut
- Leerzeichen aus dem KML-Log entfernt, damit Google-Earth die Höhe wieder richtig liest
- Speed zwischen den Punkten:
- 0 = spontan
- Poti1-8
- "Max Altitude" als Parameter auf der SD-Karte im Navi -> Beeinflusst "Parameter_MaximumAltitude" (das niedrigste gilt) und es gibt eine Fehlermeldung "ERR:Max Altitude"
- Minimalzeit für Waypoint Event in der Settings.INI einstellbar MIN_EVENT_TIME = 2
- Neuer Parameter: GPS_SBAS_DGPS_ON = 1
- SPI-Protokoll: BL.Status eingefügt und Parameter.GlobalConfig & Parameter.ExtraConfig verschoben
- Neue Datensätze: BL-Strom & Temperatur in Datensatz 'K' & Kanäle im 3D-Datensatz
- SD-Logging: Timeouts eingeführt
- Unterstützung für GPS-Module mit SW-Version 7
- Name des Waypoints im GPX-File
- SD-Karten-Speed auf 2MBit/s erhöht
- Fat16: fflush() und AppendCluster() überarbeitet
- Kommentare in der Settings.ini
- unterdrückt Magnet-Error nach Kalibrieren für 2 Sekunden
- Name der Waypoints loggen
 
375 4434 d 20 h holgerb /tags/V0.26g/ NC 0.26g H.Buss 2012.03.17
- KML-File fixed: Removed a ' ' to become compatible with GoogleEarth
- support for new MK-GPS LEA-6S-0-001 (V7)
 
374 4434 d 20 h holgerb /tags/ NC 0.26g H.Buss 2012.03.17
- KML-File fixed: Removed a ' ' to become compatible with GoogleEarth
- support for new MK-GPS LEA-6S-0-001 (V7)
 
372 4434 d 20 h holgerb /tags/ NC 0.26g H.Buss 2012.03.17
- KML-File fixed: Removed a ' ' to become compatible with GoogleEarth
- support for newest MK-GPS LEA-6S-0-001 (V7)
 
347 4606 d 19 h holgerb /tags/V0.26f/ 0.26b (15.09.2011)
- Dynamic position hold implemented
- Fehler-Texte stehen mind. 8sek an
- GPS-Lost als Error#21 eingeführt
- Uart-Variablen verschoben
- Senden der GPS-Daten für HoTT
- Ermittlung von:
- EarthMagneticField
- EarthMagneticInclination
- neuer Fehler: 22 -> Magnet error bei 20% Fehler oder >11° Abweichung zur theoretischen Inklination
- NC kann die FC-Sticks linear herunter skalieren
- MagnetError kann man ignorieren
- neue GPX-Logging-Daten:
* MotorCurrent[12];
* MotorTemperature[12];
* BL_MinOfMaxPWM; // indication if all BL-controllers run on full power
* FC_I2C_ErrorConter;
* MagnetField // should be 100%
* MagnetInclination & Error // actual inclination and the difference to the theoretical value
* AnalogData.Ch4-7
* 8 Potis
* FC-Flags
* Vario & GPS-Mode Character
* Firmware-Version
- EEPROM-Daten zum Kalibrieren sind nicht mehr kompatibel
- Ausschriften beim Kalibrieren auch beim MK3Mag eingeführt
- die in den Analogwerten angezeigten Magnetwerte sind jetzt Rohdaten
- die Inklination zum Loggen weiter gefiltert

0.26e (22.09.2011)
- berechnen der aktuellen Magnetferldstärke an der jeweiligen GPS-Position
- interne Unterscheidung 'guter Kompass' mit < 15% Fehler und 'schlechter Kompass' mit >= 15%
- Senden der Magnetwerte an die FC
- die Schwelle des Magnetfehlers auf +/- 30% erhöht

026f (26.09.2011)
- alte Kalman-Berechnung wenn Parameter ACC-Compensation == 0
- GPX-Logging in Teile zerlegt, weil das sonst 70ms dauerte
- GPS Logintime: Null auch bei dHP zulässig
 
344 4610 d 22 h holgerb /tags/V0.26e/ 0.26b (15.09.2011)
- Dynamic position hold implemented
- Fehler-Texte stehen mind. 8sek an
- GPS-Lost als Error#21 eingeführt
- Uart-Variablen verschoben
- Senden der GPS-Daten für HoTT
- Ermittlung von:
- EarthMagneticField
- EarthMagneticInclination
- neuer Fehler: 22 -> Magnet error bei 20% Fehler oder >11° Abweichung zur theoretischen Inklination
- NC kann die FC-Sticks linear herunter skalieren
- MagnetError kann man ignorieren
- neue GPX-Logging-Daten:
* MotorCurrent[12];
* MotorTemperature[12];
* BL_MinOfMaxPWM; // indication if all BL-controllers run on full power
* FC_I2C_ErrorConter;
* MagnetField // should be 100%
* MagnetInclination & Error // actual inclination and the difference to the theoretical value
* AnalogData.Ch4-7
* 8 Potis
* FC-Flags
* Vario & GPS-Mode Character
* Firmware-Version
- EEPROM-Daten zum Kalibrieren sind nicht mehr kompatibel
- Ausschriften beim Kalibrieren auch beim MK3Mag eingeführt
- die in den Analogwerten angezeigten Magnetwerte sind jetzt Rohdaten
- die Inklination zum Loggen weiter gefiltert

0.26e (22.09.2011)
- berechnen der aktuellen Magnetferldstärke an der jeweiligen GPS-Position
- interne Unterscheidung 'guter Kompass' mit < 15% Fehler und 'schlechter Kompass' mit >= 15%
- Senden der Magnetwerte an die FC
- die Schwelle des Magnetfehlers auf +/- 30% erhöht
 
341 4618 d 17 h holgerb /tags/V0.26b/ 0.26b (15.09.2011)
- Dynamic position hold implemented
- Fehler-Texte stehen mind. 8sek an
- GPS-Lost als Error#21 eingeführt
- Uart-Variablen verschoben
- Senden der GPS-Daten für HoTT
- Ermittlung von:
- EarthMagneticField
- EarthMagneticInclination
- neuer Fehler: 22 -> Magnet error bei 20% Fehler oder >11° Abweichung zur theoretischen Inklination
- NC kann die FC-Sticks linear herunter skalieren
- MagnetError kann man ignorieren
- neue GPX-Logging-Daten:
* MotorCurrent[12];
* MotorTemperature[12];
* BL_MinOfMaxPWM; // indication if all BL-controllers run on full power
* FC_I2C_ErrorConter;
* MagnetField // should be 100%
* MagnetInclination & Error // actual inclination and the difference to the theoretical value
* AnalogData.Ch4-7
* 8 Potis
* FC-Flags
* Vario & GPS-Mode Character
* Firmware-Version
- EEPROM-Daten zum Kalibrieren sind nicht mehr kompatibel
- Ausschriften beim Kalibrieren auch beim MK3Mag eingeführt
- die in den Analogwerten angezeigten Magnetwerte sind jetzt Rohdaten
- die Inklination zum Loggen weiter gefiltert
 
337 4625 d 15 h ingob /tags/ directory renamed  
336 4625 d 15 h ingob /tags/V0.24f/  
335 4625 d 15 h ingob /tags/V0.24f/Hex-Files/  
334 4625 d 15 h holgerb /tags/V0.24f/ Support for LSM303 magnet sensor  
333 4625 d 15 h ingob /tags/  
332 4625 d 15 h ingob /tags/V0_24f/  
313 4698 d 20 h holgerb /tags/V0_24e/ 0.24e H.Buss
- changed GPS-Configuraton (SBAS:“Apply integrity information” deactivated by default)
- no faster timing of SD-Card logging allowed than 500ms
- viewing the raw magnet values in the analog data
 
309 4758 d 0 h ingob /tags/  
308 4759 d 20 h holgerb /tags/V0_24c/ Hexfile 0.24c added
(The LED-Blinking speed on waypoint-Events was wrong)
 
305 4787 d 20 h ingob /tags/