Subversion Repositories NaviCtrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
757 1756 d 3 h holgerb / Public-Projectfile aktualisiert  
756 1779 d 4 h holgerb / 2.14e (19.04.2016)
- no altitude limitation if altitude sensor is defective
 
755 1779 d 4 h holgerb / 2.14e (19.04.2016)
- no altitude limitation if altitude sensor is defective
 
754 1779 d 4 h holgerb / 2.14e  
753 1779 d 22 h holgerb / 2.14e (19.04.2016)
- no altitude limitation if altitude sensor is defective
 
752 1779 d 22 h holgerb / 2.14e (19.04.2016)
- no altitude limitation if altitude sensor is defective
 
751 1779 d 22 h holgerb / 2.14e (19.04.2016)
- no altitude limitation if altitude sensor is defective
 
750 1798 d 23 h holgerb / 2.14d (31.03.2016)
- There were still problems: When using one MKGPS V3.5 on two redundant NCs, it could happen that the configuration of the GPS failed
 
749 1798 d 23 h holgerb / 2.14d (31.03.2017)
- There were still problems: When using one MKGPS V3.5 on two redundant NCs, it could happen that the configuration of the GPS failed
 
748 1798 d 23 h holgerb / no change  
747 1822 d 22 h holgerb / 2.14c (07.03.2017)
- Bugfix: When using one MKGPS V3.5 on two redundant NCs, it could happen that the configuration of the GPS failed
 
746 1822 d 22 h holgerb / 2.14c (07.03.2017)
- Bugfix: When using one MKGPS V3.5 on two redundant NCs, it could happen that the configuration of the GPS failed
 
745 1829 d 20 h holgerb / 2.14b (29.02.2016)
- comment in the triggerlog: Longitude and Latitude mixed
- bugfix: external compass was not detected correctly on NC2.x
 
744 1829 d 20 h holgerb / 2.14b (29.02.2016)
- comment in the triggerlog: Longitude and Latitude mixed
- bugfix: external compass was not detected correctly on NC2.x
 
743 1829 d 20 h holgerb / 2.14b (29.02.2016)
- comment in the triggerlog: Longitude and Latitude mixed
- bugfix: external compass was not detected correctly on NC2.x
 
742 1829 d 20 h holgerb / 2.14b (29.02.2016)
- comment in the triggerlog: Longitude and Latitude mixed
 
741 1844 d 1 h holgerb / 2.14 (21.10.2015 - 15.02.2016)
- Version for FC3.0 and 2.x
- prepared for Canbus (Master/Slave)
- Menu: Gyro removed and Analog 5-7 added
- Menu: Settings Name in main menu [0]
- internal compass: variable attitude
- SPI:
- Structures changed to 20 Bytes Payload
- huge block transfer implemented (for Parameter set)
- Settingsfile from FC to NC via SPI
- serial communication processed directly by NC:
'b':// submit extern control
'y':// serial Channels
'g':// request for the externalControl
'p':// request for the PPM_In-Daza
- GPX-Logfile: Settingsname in Logfile
- New: FC_STATUS3_CALIBRATION_DONE
- Menu.c: Showing Slave Status data
- Menu:Trigger Input
- Logfile for Camera-Trigger events (only FC3.0)
- GPS-Config: GPS with dual connector supported
- Errors:
40: RC-Voltage
41: Power Supply
42: ACC not calibratetd
- Uart:
- NC reads and processes SerialPoti
- NC reads and processes ExternalControl
- NC sends PPM_In[]
- CRC Checksum in GPX Logfile
- Menu[30] = CamCtrl
- CamCtrlCharacter in Hott-Menu
- CamCtrlCharacter Shows external TriggerCounter
- CamCtrl supported for NC 2.1
- fixed: sometimes "ERR:BL Seftest" after switch on without any reason
- CamCtrlCharacter in OSD Dataframes
- CamCtrl Shoots always one first Photo when switching to Middle Position
- size of the Settings-Data adjusted
- size of HugePacket reduced to 200 Bytes
- descend in failsafe-case starts as soon as the MK is closer than 35m to FS-Point
- Waypoints:
- Bugfix: if the climbing speed is AUTO: do not report "target reached" until the altitude is reached
- rise on first Waypoint before moving position -> max.20m
 
740 1844 d 1 h holgerb / 2.14 (21.10.2015 - 15.02.2016)
- Version for FC3.0 and 2.x
- prepared for Canbus (Master/Slave)
- Menu: Gyro removed and Analog 5-7 added
- Menu: Settings Name in main menu [0]
- internal compass: variable attitude
- SPI:
- Structures changed to 20 Bytes Payload
- huge block transfer implemented (for Parameter set)
- Settingsfile from FC to NC via SPI
- serial communication processed directly by NC:
'b':// submit extern control
'y':// serial Channels
'g':// request for the externalControl
'p':// request for the PPM_In-Daza
- GPX-Logfile: Settingsname in Logfile
- New: FC_STATUS3_CALIBRATION_DONE
- Menu.c: Showing Slave Status data
- Menu:Trigger Input
- Logfile for Camera-Trigger events (only FC3.0)
- GPS-Config: GPS with dual connector supported
- Errors:
40: RC-Voltage
41: Power Supply
42: ACC not calibratetd
- Uart:
- NC reads and processes SerialPoti
- NC reads and processes ExternalControl
- NC sends PPM_In[]
- CRC Checksum in GPX Logfile
- Menu[30] = CamCtrl
- CamCtrlCharacter in Hott-Menu
- CamCtrlCharacter Shows external TriggerCounter
- CamCtrl supported for NC 2.1
- fixed: sometimes "ERR:BL Seftest" after switch on without any reason
- CamCtrlCharacter in OSD Dataframes
- CamCtrl Shoots always one first Photo when switching to Middle Position
- size of the Settings-Data adjusted
- size of HugePacket reduced to 200 Bytes
- descend in failsafe-case starts as soon as the MK is closer than 35m to FS-Point
- Waypoints:
- Bugfix: if the climbing speed is AUTO: do not report "target reached" until the altitude is reached
- rise on first Waypoint before moving position -> max.20m
 
739 1848 d 22 h holgerb / new name -> 5cm  
738 1849 d 1 h holgerb / new variable name: Altimeter_20cm  
737 1854 d 22 h holgerb / names: Distance _dm & _cm variables  
736 1854 d 22 h holgerb / names: Distance _dm & _cm variables  
735 1854 d 22 h holgerb / Distance _dm & _cm variables  
734 1856 d 2 h holgerb / New Config structure with reserve bytes
SPI: big packet payload smaller
 
733 1856 d 2 h holgerb / cleanup  
732 1875 d 3 h holgerb / - CamCtrl Shoots always one first Photo when switching to Middle Position  
731 1879 d 1 h holgerb / 2.13f (11.01.2016)
- CamCtrl supported for NC 2.1
- fixed: sometimes "ERR:BL Seftest" after switch on without any reason
 
730 1879 d 1 h holgerb / 2.13f (11.01.2016)
- CamCtrl supported for NC 2.1
 
729 1882 d 21 h holgerb / Zoom  
728 1882 d 21 h holgerb / CamCtrl 15Hz  
727 1884 d 21 h holgerb / - CamCtrlCharacter Shows external TriggerCounter  
726 1884 d 21 h holgerb / Triggerinput  
725 1884 d 21 h holgerb / Triggerinput  
724 1884 d 21 h holgerb / Menu: CamCtrl  
723 1884 d 22 h holgerb / - CamCtrlCharacter in Hott-Menu  
722 1910 d 3 h ingob /  
721 1910 d 3 h holgerb /  
720 1910 d 4 h ingob / gpx fileformat extended  
719 1911 d 1 h holgerb / 2.13d EXT2 Output  
718 1911 d 1 h holgerb / EXT2 output