Subversion Repositories NaviCtrl

Rev

Hide changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff Changes
935 282 d 19 h holgerb /tags/V2.22a/ 2.22a (25.05.2020)
- Possibility to send the HomePosition via 's'-Command (Type = 5) - only with licese
- WAYPOINT-EVENT = 255 -> Cameratrigger continously ON (or OFF -> Depends on the IDLE-Bit)
- NMEA Input for external GNSS-Systems (RTK-GPS etc.)
- parse NMEA Data into GPS-Coordinates
- Fly with NMEA GPS Data possible
- Autotrigger everx x-Meters can be used without RC and without BL
- Repeat the WP-List x times (SETTINGS.INI)
- Logfile: <LaserAltCorr> correction, uncorrected value <\LaserAltCorr>
- Send compass-value to Gimbalcontrol for better Yaw stability and drift compensation
- Yaw Value of the Gimbal is now the compass-direction of the gimbal
- GimbaCtrl compatiblity changed --> Needs GimbalCtrl V1.04
- show ControllerID
- internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m
- Maximum altitude for Waypoints is now 3200m above starting point
- Altimeter Setpoint in dm
- Bugfix: Max-Altitude in simulation
- Bugfix: NaviData.Variometer in simulation
- Altimeter in data protocol to KopterTool now in Meters [m] instead of [5cm] -> still compatible to old tools (FLAG_ALTIMETER_M)
- new Parameters for Laser
- Bugfix: if WPL-Files with old Version 3 are loaded from SD-Card, -1 is now a valid camera angle and 121 is 'AUTO'
- Bugfix: WPL Fileversion now '4' if written by NC to SD-Card
- Bugfix: PointList[i].CamAngle is now a s8 instead u8 if written by NC to SD-Card
- if compiled as Follow-Me Transmitter: 121 is 'AUTO' -> warning old Follow-Me transmitter won't set the camaera angles correctly
- OrientationGyroCompassCorrected --> in case the rotated front direction in the setting is used
-> HoTT
-> Logfiles
 
/tags/V2.22a
934 282 d 19 h holgerb /trunk/ 2.22a (25.05.2020)
- Possibility to send the HomePosition via 's'-Command (Type = 5) - only with licese
- WAYPOINT-EVENT = 255 -> Cameratrigger continously ON (or OFF -> Depends on the IDLE-Bit)
- NMEA Input for external GNSS-Systems (RTK-GPS etc.)
- parse NMEA Data into GPS-Coordinates
- Fly with NMEA GPS Data possible
- Autotrigger everx x-Meters can be used without RC and without BL
- Repeat the WP-List x times (SETTINGS.INI)
- Logfile: <LaserAltCorr> correction, uncorrected value <\LaserAltCorr>
- Send compass-value to Gimbalcontrol for better Yaw stability and drift compensation
- Yaw Value of the Gimbal is now the compass-direction of the gimbal
- GimbaCtrl compatiblity changed --> Needs GimbalCtrl V1.04
- show ControllerID
- internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m
- Maximum altitude for Waypoints is now 3200m above starting point
- Altimeter Setpoint in dm
- Bugfix: Max-Altitude in simulation
- Bugfix: NaviData.Variometer in simulation
- Altimeter in data protocol to KopterTool now in Meters [m] instead of [5cm] -> still compatible to old tools (FLAG_ALTIMETER_M)
- new Parameters for Laser
- Bugfix: if WPL-Files with old Version 3 are loaded from SD-Card, -1 is now a valid camera angle and 121 is 'AUTO'
- Bugfix: WPL Fileversion now '4' if written by NC to SD-Card
- Bugfix: PointList[i].CamAngle is now a s8 instead u8 if written by NC to SD-Card
- if compiled as Follow-Me Transmitter: 121 is 'AUTO' -> warning old Follow-Me transmitter won't set the camaera angles correctly
- OrientationGyroCompassCorrected --> in case the rotated front direction in the setting is used
-> HoTT
-> Logfiles
 
/trunk/Hex-Files/Navi-Ctrl_STR9_V2_22a.hex
/trunk/Hex-Files/Navi-Ctrl_STR9_V2_20h.hex
/trunk/main.h
933 365 d 13 h holgerb /trunk/ 2.21j (02.03.2020)
- OrientationGyroCompassCorrected --> in case the rotated front direction in the setting is used
-> HoTT
-> Logfiles
 
/trunk/main.h
/trunk/menu.c
/trunk/spi_slave.c
/trunk/spi_slave.h
/trunk/triggerlog.c
932 365 d 13 h holgerb /trunk/ 2.21j (02.03.2020)
- OrientationGyroCompassCorrected --> in case the rotated front direction in the setting is used
-> HoTT
-> Logfiles
 
/trunk/gpx.c
931 664 d 20 h holgerb /trunk/ Follow Me-Transmitter : 121 is 'AUTO'  
/trunk/uart1.c
930 664 d 20 h holgerb /trunk/ - Bugfix: if WPL-Files with old Version 3 are loaded from SD-Card, -1 is now a valid angle and 121 is 'AUTO'
- Bugfix: WPL Fileversion now '4' if written by NC to SD-Card
- Bugfix: PointList[i].CamAngle is now a s8 instead u8 if written by NC to SD-Card
 
/trunk/waypoints.c
/trunk/waypoints.h
929 664 d 22 h holgerb /trunk/ 2.21h (02.04.2019)
- Send compass-value to Gimbalcontrol for better Yaw stability and drift compensation
- Yaw Value of the Gimbal is now the compass-direction of the gimbal
- GimbaCtrl compatiblity changed --> Needs GimbalCtrl V1.04
- show ControllerID
- internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m
- Altimeter Setpoint in dm
- Max-Altitude in simulation
- NaviData.Variometer in simulation
- Altimeter in data protocol to KopterTool now in Meters [m] instead of [5cm] -> still compatible to old tools (FLAG_ALTIMETER_M)
- new Parameters for Laser
 
/trunk/spi_slave.h
928 667 d 19 h holgerb /trunk/ - Altimeter Setpoint in dm  
/trunk/waypoints.c
927 667 d 19 h holgerb /trunk/ - Altimeter Setpoint in dm
- Altimeter in data protocol to KopterTool now in Meters [m] instead of [5cm] -> still compatible to old tools (FLAG_ALTIMETER_M)
 
/trunk/uart1.c
/trunk/uart1.h
926 667 d 19 h holgerb /trunk/ Altimeter Setpoint in dm  
/trunk/spi_slave.c
925 667 d 19 h holgerb /trunk/ Altimeter Setpoint in dm  
/trunk/main.h
924 670 d 19 h holgerb /trunk/ - Max-Altitude in simulation
- NaviData.Variometer in simulation
 
/trunk/main.c
/trunk/main.h
/trunk/spi_slave.c
/trunk/uart1.c
/trunk/uart1.h
/trunk/waypoints.c
923 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/triggerlog.c
/trunk/uart1.c
922 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/spi_slave.h
921 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/spi_slave.c
920 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/MobileMenu.c
919 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/menu.c
918 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/main.h
917 670 d 22 h holgerb /trunk/ - internal resolution of Baro altitude changed from 5cm to 10cm to allow Waypoint flight > 1600m  
/trunk/main.c
916 670 d 22 h holgerb /trunk/ Failsafe value  
/trunk/CamCtrl.c

Show All