Subversion Repositories FlightCtrl

Rev

Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
2362 2397 d 4 h /branches/V0.91L_ACC-HH_MartinR/ alte Hex gelöscht  
2361 2397 d 4 h /branches/V0.91L_ACC-HH_MartinR/ Hex-Files hinzugefügt
MartinR
 
2360 2397 d 5 h MartinR /branches/V0.91L_ACC-HH_MartinR/ ACC-HH Umschaltung angepasst an V0.91L
Autor: MartinR
 
2350 2433 d 14 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91 (public Beta)
- GPS-Parameter changed (P = 90->100; I = 90->90; D = 90->120; A = 40)
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- show name of active parameter set in the HoTT/Jeti display
- fixed in 0.91L: if "ServoRelative" is used, it coud happen that the servo moves a wide range in the first second after the first calibration
- Servo3-5 Limit to 24-255
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi (or zero if unsigned)
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 Fix -> -127
// 31 Fix -> 0
// 32 Fix -> 128
 
2349 2437 d 11 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91 (public Beta)
- GPS-Parameter changed (P = 90->100; I = 90->90; D = 90->120; A = 40)
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- show name of active parameter set in the HoTT/Jeti display
- fixed in 0.91L: if "ServoRelative" is used, it coud happen that the servo moves a wide range in the first second after the first calibration
- Servo3-5 Limit to 24-255
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi (or zero if unsigned)
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 Fix -> -127
// 31 Fix -> 0
// 32 Fix -> 128
 
2348 2449 d 14 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91i (public Beta)
- GPS-Parameter changed (P = 90->100; I = 90->90; D = 90->120; A = 40)
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- show name of active parameter set in the HoTT/Jeti display
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi (or zero if unsigned)
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 Fix -> -127
// 31 Fix -> 0
// 32 Fix -> 128
 
2346 2452 d 10 h holgerb /branches/V0.91L_ACC-HH_MartinR/ Faster transmission of BL-Temperatures

0.91c
- GPS-Parameter changed (P = 90->100; I = 90->90; D = 90->120; A = 40)
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- show name of active parameter set in the HoTT/Jeti display
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi (or zero if unsigned)
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 Fix -> -127
// 31 Fix -> 0
// 32 Fix -> 128
 
2345 2455 d 14 h holgerb /branches/V0.91L_ACC-HH_MartinR/ - Auto-Start/Landing  
2344 2457 d 14 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91c
- GPS-Parameter changed (P = 90->100; I = 90->90; D = 90->120; A = 40)
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- show name of active parameter set in the HoTT/Jeti display
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi (or zero if unsigned)
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 Fix -> -127
// 31 Fix -> 0
// 32 Fix -> 128
 
2342 2460 d 8 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91c
- Move NICK/Roll Sticks for switching on / off
- Move the Stick > 100 instead > 75 for switch on / off
- Failsafe active if ACC-Upgarde
- AltitudeMode, GPS_Mode & Carefree_Mode are now direct channels instead of Poti-Values (NaviGpsModeChannel,CareFreeChannel,HoeheChannel)
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- Auto-Start/Landing
- JetiEX: Name set to 'MK'
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 -> -127
// 31 -> 0
// 32 -> 128
 
2341 2464 d 8 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91b
- NC-SPI communication from 25Hz to 41Hz
- MotorTemperature and GPS-Mode-Switch more often to NC
- if(CareFree) Parameter_AchsKopplung1 += 30; removed
- UART-Buffer increased from 175 to 220 Bytes
- no. of RC channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
// 30 -> -127
// 31 -> 0
// 32 -> 128
 
2340 2466 d 8 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.91a
- Auto-Start/Landing
- StickNeutral setting per default 127
- UART-Buffer increased from 175 to 220 Bytes
- no. of channels increased from 12 to 16
// 0 -> frei bzw. ACT rssi
// 1 - 16 -> 1-16
// 17 - 28 -> 12 Serial channels
// 29 -> WP-Event kanal
 
2337 2467 d 11 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (27.05.2013)
- Changes for better EEPROM-Safety
- variable ActiveParamSet instead of the direct EEPROM-Reading (faster)
- Checking the ACC-Z value in flight and report ACC-Z if out of range
- disable Altitude hold in case of ACC-Z error
 
2336 2467 d 11 h holgerb /branches/V0.91L_ACC-HH_MartinR/ EEPROM-Reset nach EEPROM.c verschoben  
2334 2468 d 11 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (27.05.2013)
- Changes for better EEPROM-Safety
- variable ActiveParamSet instead of the direct EEPROM-Reading (faster)
- Checking the ACC-Z value in flight and report ACC-Z if out of range
- disable Altitude hold in case of ACC-Z error
 
2333 2471 d 8 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (23.05.2013)
- Changes for better EEPROM-Safety
- variable ActiveParamSet instead of the EEPROM-Reading
 
2332 2471 d 9 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (23.05.2013)
- Changes for better EEPROM-Safety
- variable ActiveParamSet instead of the EEPROM-Reading
 
2331 2471 d 9 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (23.05.2013)
- Changes for better EEPROM-Safety
- variable ActiveParamSet instead of the EEPROM-Reading
 
2330 2472 d 15 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90j (23.05.2013)
- Changes for better EEPROM-Safety
 
2327 2482 d 5 h holgerb /branches/V0.91L_ACC-HH_MartinR/ 0.90h (14.05.2013)
- Auto Start and landing for Waypoints
- back to old eeprom-compatiblity to remain compatible to other Tools
- HoTT-Bugfix: no speech while vario tone
- Bugfix: Wrong error speech in JetiEX ("Error calibration")
 

Show All