Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
2739 912 d 4 h holgerb / update redundant version  
2738 912 d 4 h holgerb / update redundant version  
2737 949 d 6 h holgerb / 2.20a (25.04.2017 - 1.11.2017)
- variable baudrate
- Automatic yaw in waypoint flight if CF-Switch is not assigned
- Speak "MK_READY" if the MK is ready and not moving
- New HoTT-Spoken words - Needs Transmitter Firmware Update
- BL-Gimbal
- External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
- SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
- NC also beeps if the transmitter was not switched on
- variable baudrate on NC - up to 256000Bd
- new Parameter: FailsafeAltitude for RC-Lost
- new Parameter: GimbalYawChannel
- Looping sources deleted

2.20b (14.11.2017)
- ExternalControl: Send data to NC for virtual LCD

2.20c (29.11.2017)
- Two channels in Parameters for Gimbal Control -> external switches
 
2736 949 d 6 h holgerb / 2.20a (25.04.2017 - 1.11.2017)
- variable baudrate
- Automatic yaw in waypoint flight if CF-Switch is not assigned
- Speak "MK_READY" if the MK is ready and not moving
- New HoTT-Spoken words - Needs Transmitter Firmware Update
- BL-Gimbal
- External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
- SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
- NC also beeps if the transmitter was not switched on
- variable baudrate on NC - up to 256000Bd
- new Parameter: FailsafeAltitude for RC-Lost
- new Parameter: GimbalYawChannel
- Looping sources deleted

2.20b (14.11.2017)
- ExternalControl: Send data to NC for virtual LCD

2.20c (29.11.2017)
- Two channels in Parameters for Gimbal Control -> external switches
 
2735 949 d 6 h holgerb / 2.20a (25.04.2017 - 1.11.2017)
- variable baudrate
- Automatic yaw in waypoint flight if CF-Switch is not assigned
- Speak "MK_READY" if the MK is ready and not moving
- New HoTT-Spoken words - Needs Transmitter Firmware Update
- BL-Gimbal
- External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
- SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
- NC also beeps if the transmitter was not switched on
- variable baudrate on NC - up to 256000Bd
- new Parameter: FailsafeAltitude for RC-Lost
- new Parameter: GimbalYawChannel
- Looping sources deleted

2.20b (14.11.2017)
- ExternalControl: Send data to NC for virtual LCD

2.20c (29.11.2017)
- Two channels in Parameters for Gimbal Control -> external switches
 
2734 957 d 3 h holgerb / 2.20b (14.11.2017)
- ExternalControl: Send data to NC for virtual LCD
 
2733 984 d 5 h holgerb / 2.19a (25.04.2017 - 1.11.2017)
- variable baudrate
- Automatic yaw in waypoint flight if CF-Switch is not assigned
- Speak "MK_READY" if the MK is ready and not moving
- New HoTT-Spoken words - Needs Transmitter Firmware Update
- BL-Gimbal
- External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
- SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
- NC also beeps if the transmitter was not switched on
- variable baudrate on NC - up to 256000Bd
- new Parameter: FailsafeAltitude for RC-Lost
- new Parameter: GimbalYawChannel
- Looping sources deleted
 
2732 984 d 5 h holgerb / 2.19f (01.11.2017)
- new Parameter: GimbalYawChannel
- Looping sources deleted
 
2731 1025 d 6 h holgerb / - new Parameter: FailsafeAltitude for RC-Lost  
2730 1025 d 6 h holgerb / - variable baudrate on NC - up to 256000Bd  
2729 1025 d 6 h holgerb / small changes  
2728 1025 d 6 h holgerb / - variable baudrate on NC - up to 256000Bd  
2727 1059 d 1 h holgerb / 2.19c
- BL-Gimbal
- External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
- SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
- NC also beeps if the transmitter was not switched on
 
2726 1061 d 7 h holgerb / no change  
2725 1061 d 7 h holgerb / - SPI -> Some Data moved to new Positions
- SPI -> Block to FC now 2 bytes longer and unused FCStatus removed
- Send HoTT_Statustext to NC
 
2724 1061 d 7 h holgerb / no change  
2723 1061 d 7 h holgerb / - New HoTT-Spoken words - Needs Transmitter Firmware Update  
2722 1061 d 7 h holgerb / - New HoTT-Spoken words - Needs Transmitter Firmware Update
- Send HoTT_Statustext to NC
 
2721 1061 d 8 h holgerb / - External Control: EC_ONLY_IF_MOTOR_OFF 0x10 // use these Stick Positions only if the motors are not running -> this is used for calibrate etc. to make sure that full throttle not applied with running motors
- if the AltitudeHold is used via ExternalControl -> switch on AltitudeHold in the parameters -> ExternalControl.Switches & EC2_ALTITUDE
 
2720 1171 d 8 h holgerb / 2.18b (27.04.2017)
- Bugfix: Dynamic Position Hold, Teachable Carefree & RC-Lost Beep-Off were deactivated in the settings when updating from older Version to 2.18
 

Show All