Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
2647 3117 d 9 h holgerb /tags/V2.14c/Hex-Files/ 2.14e  
2646 3117 d 9 h holgerb /tags/V2.14c/ 2.14b
- default:
EE_Parameter.CamCtrlModeChannel = 0;
EE_Parameter.CamCtrlZoomChannel = 0;

2.14c
- checking baro-sensor during flight. Report "ERR:Pressure sensor" and disable Altitude control in case of a Problem		  
2645 /  
2644 /  
2643 /  
2642 /  
2641 /  
2640 /  
2639 /  
2638 /  
2637 3159 d 13 h ingob /MikroKopter-Tool/ bugfix: CamCtrl channel in settings file fixed  
2636 3178 d 16 h ingob /MikroKopter-Tool/ wrong version number fixed - now V2.14a  
2635 3179 d 8 h holgerb /tags/V2.14a/Hex-Files/ Hex-File renamed  
2634 3180 d 13 h ingob /MikroKopter-Tool/ MK-Tool V2.14a  
2633 3181 d 13 h holgerb /tags/V2.14a/ 2.14a (22.10.2015 - 15.02.2016)
- Support for FC3.0
- NC-Lib: compatiblity increased; Version check in LIB
- ExternalControl:
- more features added (GPS-Switch, Altitude, CF,..)
- can be sent to NC and NC will foreward through SPI
- ReceiverOkay implemented -> either if Data from RC or External Control are valid
- SPI transmission of big Blocks added (for config data etc.)
- SPI Error-counter added in analog data
- SPI transmission changed to 20bytes of payload
- HoTT-Text: "Compass-Calibration"
- Errors:
40: RC-Voltage
41: Power Supply
42: ACC not calibratetd
- show settings name: 5 seconds instead of 10 seconds
- HoTT & Jeti: Show Slave Error Code in Telemetry (only FC 3.0)
- Slave marks BLs as present if they answer via UART
- FC3.0: Transmit Status to Master FC
- prevents switch-on in case of error
- switches off if Master says: Switched off by RC-Command
- New Parameter: CamCtrlModeChannel & CamCtrlZoomChannel
- CamCtrl Character in HoTT & Jeti display
- HugeBlock: wait until the I2C data is finished -> avoid I2C errors
- Servo Position from Serial Poti: check if there is valid data
- 30 sek Timout on serial Data (only for Servo Position until now)
- Small Bugfix: Beep sequence was sometimes disturbed during power on
- SPEAK_RECEIVER_VOLTAGE implemented (FC3.0)
- since 2.13h (02.2016), the eeprom parameters are backwards compatible
- uart buffer increased to 250 bytes to hold the new eeporm parameter structure
- Simulation: correct behavior of Servo-Failsafe-Positions
- by default: CFG3_NO_SDCARD_NO_START		  
2632 /  
2631 /  
2630 /  
2629 /  
2628 /  

←Prev12Next→

Show All