Subversion Repositories Projects

Rev

Rev 449 | Blame | Compare with Previous | Last modification | View Log | RSS feed

/***************************************************************************
 *   Copyright (C) 2008 by Manuel Schrape                                  *
 *   manuel.schrape@gmx.de                                                 *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License.        *
 *                                                                         *
 *   This program is distributed in the hope that it will be useful,       *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 *   GNU General Public License for more details.                          *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this program; if not, write to the                         *
 *   Free Software Foundation, Inc.,                                       *
 *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 ***************************************************************************/


// TODO: Wiederholungssenden wieder einbauen

#include <QtGui>

#include <QLineEdit>
#include <QString>
#include <QTimer>
#include <QIcon>
#include <QToolButton>
#include <QSpinBox>
#include <QAction>
#include <QPalette>

#include "mktool.h"
#include "dlg_Config.h"
#include "dlg_Motortest.h"
#include "dlg_Preferences.h"
#include "../global.h"
#include "../Classes/ToolBox.h"

#include <stdlib.h>

MKTool::MKTool()
{
    setupUi(this);

    Settings = new cSettings;

    init_Arrays();
    init_GUI();
    init_Cockpit();

    init_Objects();
    init_Connections();

    init_Plot();
}

void MKTool::init_GUI()
{
    setWindowTitle(QA_NAME + " v" + QA_VERSION);

    // Tab mit Debug-Elementen verbergen
    //tab_Main->removeTab(6);

    // Develop - Nicht gebrauchte sachen abschalten.
    pb_SettingsReset->hide();
    pb_Flash->hide();
    rb_NC->hide();

    // Beta-Sachen einschalten.
#ifdef _BETA_
    ac_QMKServer->setEnabled(true);
#endif

    // Settings-Tab hinzufügen.
    f_Settings = new wdg_Settings( this );
    f_Settings->set_Config(Settings);
    tab_Main->insertTab ( 2, f_Settings, ac_View2->icon(), tr("FC-Settings"));
    tab_Main->widget(2)->setObjectName("Tab_2");

    // Zusätzliche Widgets in die Toolbar.
    tb_TTY->addWidget(lb_Port);
    tb_TTY->addWidget(le_Port);

    tb_Hardware->addWidget(rb_SelFC);
    tb_Hardware->addWidget(rb_SelNC);
    tb_Hardware->addWidget(rb_SelMag);

    tb_Allgemein->setVisible(Settings->GUI.ToolViews[0]);
    tb_Werkzeuge->setVisible(Settings->GUI.ToolViews[1]);
    tb_Debug->setVisible(Settings->GUI.ToolViews[2]);
    tb_TTY->setVisible(Settings->GUI.ToolViews[3]);
    tb_Hardware->setVisible(Settings->GUI.ToolViews[4]);

#ifdef _EEEPC_
    lb_Status->hide();
#endif

    lb_Status->setText(tr("Hallo bei QMK-Groundstation...!!!"));

    resize(Settings->GUI.Size);
    move(Settings->GUI.Point);

    if (Settings->GUI.isMax)
    {
        showMaximized();
    }

    // Analoglabels anzeigen
    for (int a = 0; a < MaxAnalog; a++)
    {
        lb_Analog[a]->setText(Settings->Analog1.Label[a]);
    }

    // Kopie der Tabs anlegen
    for (int b = 0; b < 7; b++)
    {
        TabWidgets[b] = tab_Main->widget(b);
    }

    // Ausgeblendete Tabs ausblenden
    for (int c = 0; c < 7; c++)
    {
        if (Settings->GUI.TabViews[c] == false)
        {
            QString TabName = QString("Tab_%1").arg(c);

            for (int d = 0; d < tab_Main->count(); d++)
            {
                if (tab_Main->widget(d)->objectName() == TabName)
                {
                    tab_Main->removeTab(d);
                }
            }
        }
    }

    ac_View0->setChecked(Settings->GUI.TabViews[0]);
    ac_View1->setChecked(Settings->GUI.TabViews[1]);
    ac_View2->setChecked(Settings->GUI.TabViews[2]);
    ac_View3->setChecked(Settings->GUI.TabViews[3]);
    ac_View4->setChecked(Settings->GUI.TabViews[4]);
    ac_View5->setChecked(Settings->GUI.TabViews[5]);
    ac_View6->setChecked(Settings->GUI.TabViews[6]);

    le_Port->setText(Settings->TTY.Port);

    cb_ShowMSG->setChecked(Settings->GUI.Term_Info);
    cb_ShowData->setChecked(Settings->GUI.Term_Data);
    cb_ShowAlways->setChecked(Settings->GUI.Term_Always);
}

void MKTool::init_Cockpit()
{
    // Cockpit-Elemente
    QPalette newPalette;

    newPalette.setColor(QPalette::Base, Qt::darkBlue);
    newPalette.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));
    newPalette.setColor(QPalette::Text, Qt::white);

    Compass->setScaleOptions(QwtDial::ScaleTicks | QwtDial::ScaleLabel);
    Compass->setScaleTicks(0, 0, 3);
    Compass->setScale(36, 5, 0);

    Compass->setNeedle(new QwtDialSimpleNeedle(QwtDialSimpleNeedle::Arrow, true, Qt::red, QColor(Qt::gray).light(130)));
    Compass->setPalette(newPalette);
    Compass->setMaximumSize(QSize(MeterSize, MeterSize));
    Compass->setMinimumSize(QSize(MeterSize, MeterSize));

    QPalette newPalette1;

    newPalette1.setColor(QPalette::Base, Qt::darkBlue);
    newPalette1.setColor(QPalette::Foreground, QColor(255,128,0).dark(120));
    newPalette1.setColor(QPalette::Text, Qt::white);

    Attitude = new AttitudeIndicator(this);
    Attitude->setMaximumSize(QSize(MeterSize, MeterSize));
    Attitude->setMinimumSize(QSize(MeterSize, MeterSize));
    Attitude->setPalette(newPalette1);

    verticalLayout->addWidget(Attitude);

    qwt_Rate->setRange(-10.0, 10.0, 0.1, 0);

    newPalette1.setColor(QPalette::Foreground, QColor(Qt::darkBlue).dark(120));

    SpeedMeter = new cSpeedMeter(this);
    SpeedMeter->setMaximumSize(QSize(MeterSize, MeterSize));
    SpeedMeter->setMinimumSize(QSize(MeterSize, MeterSize));
    SpeedMeter->setPalette(newPalette1);
    SpeedMeter->setRange(0.0, 5.0);
    SpeedMeter->setScale(1, 2, 0.5);
    SpeedMeter->setProperty("END", 5);

    LayOut_Speed->addWidget(SpeedMeter);
}

void MKTool::init_Objects()
{
    //new KopterData object that contains all data from MK
    data = new KopterData();

    //new QT-Communication object
    com = new QTSerialCommunication(handler);

    //create handler that handles incomming data
    handler = new Handler(com, data);

    // QTimer-Instanzen
    //FIXME: Move Ticker to libMK/QTCommunication.cpp
    //Ticker = new QTimer(this);

    // Logger
    logger = new Logger(Settings, data);

    // LCD-Dialog
    f_LCD = new dlg_LCD(this);

    // LCD-Dialog
    f_MotorMixer = new dlg_MotorMixer(this);

    // LCD-Dialog
    f_Map = new dlg_Map(this);
    f_Map->create_Map(Settings);

    KML_Server = new cKML_Server();

    QMK_Server = new cQMK_Server();
    QMK_Server->setProperty("Connect", false);

    if (Settings->Server.StartServer)
    {
        ac_StartServer->setChecked(true);
        KML_Server->start_Server(Settings->Server.Port.toInt(), Settings);
    }
}

void MKTool::init_Connections()
{
    connect(Dec, SIGNAL(clicked()), this, SLOT(slot_Test()));

    // Waypoints übergeben
    connect(f_Map, SIGNAL(set_Target(sWayPoint)), this , SLOT(slot_MAP_SetTarget(sWayPoint)));
    connect(f_Map, SIGNAL(set_WayPoints(QList<sWayPoint>)), this , SLOT(slot_MAP_SetWayPoints(QList<sWayPoint>)));

    // Daten Senden / Empfangen
//FIXME: put this in QTCommunication.cpp
//    connect(o_Connection, SIGNAL(newData(sRxData)), this, SLOT(slot_newData(sRxData)));
//    connect(o_Connection, SIGNAL(showTerminal(int, QString)), this, SLOT(slot_showTerminal(int, QString)));

    // click on button to open/close serial connection
    connect(ac_ConnectTTY, SIGNAL(triggered()), this, SLOT(slot_serial_connect()));

    // clock on button for the TCP-Connection to other QMK-Groundstations
    connect(ac_QMKServer, SIGNAL(triggered()), this, SLOT(slot_QMKS_Connect()));

    // Buttons Settings lesen / schreiben
    connect(f_Settings->pb_Read,   SIGNAL(clicked()), this, SLOT(slot_GetFCSettings()));
    connect(f_Settings->pb_Write,  SIGNAL(clicked()), this, SLOT(slot_SetFCSettings()));

    // Actions
    connect(ac_Config,       SIGNAL(triggered()), this, SLOT(slot_ac_Config()));
    connect(ac_Preferences,  SIGNAL(triggered()), this, SLOT(slot_ac_Preferences()));
    connect(ac_Motortest,    SIGNAL(triggered()), this, SLOT(slot_ac_Motortest()));
    connect(ac_MotorMixer,   SIGNAL(triggered()), this, SLOT(slot_ac_MotorMixer()));
    connect(ac_LCD,          SIGNAL(triggered()), this, SLOT(slot_ac_LCD()));
    connect(ac_Map,          SIGNAL(triggered()), this, SLOT(slot_ac_Map()));
    connect(ac_FastDebug,    SIGNAL(triggered()), this, SLOT(slot_ac_FastDebug()));
    connect(ac_NoDebug,      SIGNAL(triggered()), this, SLOT(slot_ac_NoDebug()));
    connect(ac_FastNavi,     SIGNAL(triggered()), this, SLOT(slot_ac_FastNavi()));
    connect(ac_NoNavi,       SIGNAL(triggered()), this, SLOT(slot_ac_NoNavi()));
    connect(ac_GetLabels,    SIGNAL(triggered()), this, SLOT(slot_ac_GetLabels()));

    // Plotter starten / scrollen
    connect(scroll_plot,     SIGNAL(valueChanged(int)), this, SLOT(slot_ScrollPlot(int)));
    connect(ac_StartPlotter, SIGNAL(triggered()), this, SLOT(slot_ac_StartPlotter()));
    connect(ac_StartServer,  SIGNAL(triggered()), this, SLOT(slot_ac_StartServer()));

    // Tabs ein & ausblenden
    connect(ac_View0,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View1,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View2,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View3,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View4,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View5,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));
    connect(ac_View6,        SIGNAL(triggered()), this, SLOT(slot_ac_View()));

    connect(ac_SelNC,        SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
    connect(ac_SelFC,        SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));
    connect(ac_SelMag,       SIGNAL(triggered()), this, SLOT(slot_ac_Hardware()));

    connect(rb_SelNC,        SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
    connect(rb_SelFC,        SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));
    connect(rb_SelMag,       SIGNAL(clicked()), this, SLOT(slot_rb_Hardware()));

    // firmeware Updateen / flashen
    connect(pb_Update,   SIGNAL(clicked()), this, SLOT(slot_pb_Update()));
    connect(pb_HexFile,  SIGNAL(clicked()), this, SLOT(slot_pb_HexFile()));

    // Wegpunkt-Befehl
    connect(pb_FlyTo,        SIGNAL(clicked()), this, SLOT(slot_pb_SendTarget()));

    // CVS-Record starten / stoppen
    connect(ac_RecordCSV,  SIGNAL(triggered()), this, SLOT(slot_RecordLog()));

    // Timer-Events
    //FIXME: Move Ticker to libMK/QTCommunication.cpp
    //connect(Ticker,   SIGNAL(timeout()),       SLOT(slot_Ticker()));

    // Seitenwechsel
    connect(tab_Main,             SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
//    connect(f_Settings->tab_Par,  SIGNAL(currentChanged(int)), this, SLOT(slot_TabChanged(int)));
    connect(f_Settings->listWidget,  SIGNAL(currentRowChanged(int)), this, SLOT(slot_TabChanged(int)));

    // About QMK & About-QT Dialog einfügen
    connect(ac_About, SIGNAL(triggered()), this, SLOT(slot_ac_About()));
    menu_Help->addAction(trUtf8("Über &Qt"), qApp, SLOT(aboutQt()));
}

void MKTool::init_Arrays()
{
    lb_Analog[0]  = lb_A_0;
    lb_Analog[1]  = lb_A_1;
    lb_Analog[2]  = lb_A_2;
    lb_Analog[3]  = lb_A_3;
    lb_Analog[4]  = lb_A_4;
    lb_Analog[5]  = lb_A_5;
    lb_Analog[6]  = lb_A_6;
    lb_Analog[7]  = lb_A_7;
    lb_Analog[8]  = lb_A_8;
    lb_Analog[9]  = lb_A_9;
    lb_Analog[10] = lb_A_10;
    lb_Analog[11] = lb_A_11;
    lb_Analog[12] = lb_A_12;
    lb_Analog[13] = lb_A_13;
    lb_Analog[14] = lb_A_14;
    lb_Analog[15] = lb_A_15;
    lb_Analog[16] = lb_A_16;
    lb_Analog[17] = lb_A_17;
    lb_Analog[18] = lb_A_18;
    lb_Analog[19] = lb_A_19;
    lb_Analog[20] = lb_A_20;
    lb_Analog[21] = lb_A_21;
    lb_Analog[22] = lb_A_22;
    lb_Analog[23] = lb_A_23;
    lb_Analog[24] = lb_A_24;
    lb_Analog[25] = lb_A_25;
    lb_Analog[26] = lb_A_26;
    lb_Analog[27] = lb_A_27;
    lb_Analog[28] = lb_A_28;
    lb_Analog[29] = lb_A_29;
    lb_Analog[30] = lb_A_30;
    lb_Analog[31] = lb_A_31;
    le_Analog[0] = le_A_0;
    le_Analog[1] = le_A_1;
    le_Analog[2] = le_A_2;
    le_Analog[3] = le_A_3;
    le_Analog[4] = le_A_4;
    le_Analog[5] = le_A_5;
    le_Analog[6] = le_A_6;
    le_Analog[7] = le_A_7;
    le_Analog[8] = le_A_8;
    le_Analog[9] = le_A_9;
    le_Analog[10] = le_A_10;
    le_Analog[11] = le_A_11;
    le_Analog[12] = le_A_12;
    le_Analog[13] = le_A_13;
    le_Analog[14] = le_A_14;
    le_Analog[15] = le_A_15;
    le_Analog[16] = le_A_16;
    le_Analog[17] = le_A_17;
    le_Analog[18] = le_A_18;
    le_Analog[19] = le_A_19;
    le_Analog[20] = le_A_20;
    le_Analog[21] = le_A_21;
    le_Analog[22] = le_A_22;
    le_Analog[23] = le_A_23;
    le_Analog[24] = le_A_24;
    le_Analog[25] = le_A_25;
    le_Analog[26] = le_A_26;
    le_Analog[27] = le_A_27;
    le_Analog[28] = le_A_28;
    le_Analog[29] = le_A_29;
    le_Analog[30] = le_A_30;
    le_Analog[31] = le_A_31;
}

void MKTool::init_Plot()
{
    NextPlot = 0;

    qwtPlot->setCanvasBackground(QColor(QRgb(0x00000000)));

    qwtPlot->insertLegend(new QwtLegend(), QwtPlot::RightLegend);

    QwtPlotGrid *Grid = new QwtPlotGrid();
    Grid->setMajPen(QPen(Qt::gray, 0, Qt::DotLine));

    Grid->attach(qwtPlot);

    qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);

    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a] = new QwtPlotCurve(Settings->Analog1.Label[a]);
        Plot[a]->setPen(QPen(QColor(Def_Colors[a])));
//        Plot[a]->setRenderHint(QwtPlotItem::RenderAntialiased);

        if (Settings->Analog1.PlotView[a])
            Plot[a]->attach(qwtPlot);
    }
    qwtPlot->replot();
}

void MKTool::slot_set_Settings(cSettings *t_Settings)
{
    Settings = t_Settings;
}

void MKTool::slot_Test()
{
//    sRxData RX;

//    RX.str = IN->text().toLatin1().data();

//    RX.input = (char *)RX.str.c_str();

//    slot_newData(RX);
}

// KML-Datei nach Wegpunkt parsen
// TODO: Richtigen KML-Parser bauen
void MKTool::parse_TargetKML()
{
    QString Tmp = te_KML->toPlainText().simplified();
    QStringList list;

    if ((Tmp.contains("<kml xmlns=\"http://earth.google.com/kml/2.2\">"))  && (Tmp.contains("<coordinates>")))
    {
        list = Tmp.split("<coordinates>");
        list = list[1].split(",");

        le_TarLong->setText( QString::number( list[0].toDouble() ) );
        le_TarLat->setText( QString::number( list[1].toDouble() ) );
        //le_TarLong->setText(ToolBox::get_Float((List[0] * 10000000), 7));
        //le_TarLat->setText(ToolBox::get_Float((List[1] * 10000000), 7));
    }
}

// send waypoint to NaviCtrl.
void MKTool::slot_pb_SendTarget()
{
    sNaviData navi = data->navi;
    if ((navi.Current.Longitude == 0) && (navi.Current.Latitude == 0))
    {
        QMessageBox msgB;
        QString msg;
        msgB.setText(tr("Fehler: Es konnten keine GPS-Daten vom Mikrokopter empfangen werden"));
        msgB.exec();
        return;
    }

    //create a waypoint that can be understood by NaviCtrl
    Waypoint_t desired_pos;
    bool ok_lat, ok_lon;

    //get data from QT-GUI
    double desired_long, desired_lat;

    desired_long = le_TarLong->text().toDouble(&ok_lon);
    desired_lat  = le_TarLat->text().toDouble(&ok_lat);

    if (ok_lon && desired_long < 100)
        desired_long *= 10000000+0.5;

    if (ok_lat && desired_lat < 100)
        desired_lat *= 10000000+0.5;

    //fill WayPoint struct
    desired_pos.Position.Altitude = 0;
    desired_pos.Position.Longitude = int32_t(desired_long);
    desired_pos.Position.Latitude =  int32_t(desired_lat);
    desired_pos.Position.Status = NEWDATA;
    desired_pos.Heading = -1;
    desired_pos.ToleranceRadius = 5;
    desired_pos.HoldTime = sb_TarTime->value();
    desired_pos.Event_Flag = 0;
    desired_pos.reserve[0] = 0; // reserve
    desired_pos.reserve[1] = 0; // reserve
    desired_pos.reserve[2] = 0; // reserve
    desired_pos.reserve[3] = 0; // reserve

    //...and send it to NaviCtrl
    int max_radius = 10000;
    if (ok_lat && ok_lon &&
        abs((double)(navi.Current.Longitude - desired_pos.Position.Longitude)) < max_radius &&
        abs((double)(navi.Current.Latitude  - desired_pos.Position.Latitude)) < max_radius)
    {
        handler->send_waypoint(desired_pos);
    }
    else
    {
        QMessageBox msgB;
        QString msg;
        msg += tr("Bitte die Eingabe ueberpruefen!\n");
        msg += tr("Die Werte muessen sich in der Naehe der aktuellen Koordinaten befinden\n");
        msg += "(Lon: ";
        msg += QString::number(navi.Current.Longitude);
        msg += ", ";
        msg += "Lat: ";
        msg += QString::number(navi.Current.Latitude);
        msg += ")";
        msgB.setText(msg);
        msgB.exec();
    }
}

// Hardware-Auswahl im Menp
void MKTool::slot_ac_Hardware()
{
    QAction *Action = (QAction*)sender();

    if (Action->isChecked() == false)
    {
        Action->setChecked(true);
    }

    slot_rb_Hardware();
}

// Hardware Auswahl und umschalten
void MKTool::slot_rb_Hardware()
{
    if ((rb_SelNC->isChecked() == false) && (data->mode.id != ADDRESS_NC))
    {
        lb_Status->setText(tr("Schalte um auf NaviCtrl."));
        handler->switch_navictrl();
        //FIXME: remove wait?
        ToolBox::wait(SLEEP);
    }

    if (rb_SelFC->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf FlightCtrl."));
        handler->switch_flightctrl();
    }
    else
    if (rb_SelMag->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf MK3MAG."));
        handler->switch_mk3mag();
    }
    else
    if (rb_SelNC->isChecked())
    {
        lb_Status->setText(tr("Schalte um auf NaviCtrl."));
        handler->switch_navictrl();
    }
    ToolBox::wait(SLEEP);

//    qDebug("Select RB Hardware");
    handler->get_version();
}

//FIXME: Put this somewhere in libMK/QTCommunication.cpp
// Ticker-Event
///////////////
/*void MKTool::slot_Ticker()
{
    if (TickerDiv)
        TickerDiv = false;
    else
        TickerDiv = true;

    for (int a = 0; a < MaxTickerEvents; a++)
    {
        if (TickerEvent[a] == true)
        {
            switch(a)
            {
                case 0 :
                    {
                    }
                break;
                case 1 :
                    TX_Data[0] = 0;
                    o_Connection->send_Cmd('p', ADDRESS_FC, TX_Data, 0, false);
                break;
                case 2 :
                    if (f_LCD->cb_LCD->isChecked())
                    {
                        if (!f_LCD->isVisible())
                        {
                            Ticker->setInterval(2000);
                            TickerEvent[2] = false;
                        }
                        TX_Data[0] = LCD_Page;
                        TX_Data[1] = 0;
                        o_Connection->send_Cmd('l', ADDRESS_ALL, TX_Data, 1, true);
                    }
                break;
                case 3 :
                    if (ac_FastDebug->isChecked())
                    {
                        TX_Data[0] = Settings->Data.Debug_Fast / 10;
                        o_Connection->send_Cmd('d', ADDRESS_ALL, TX_Data, 1, false);
                    }
                    else
                    {
                        TX_Data[0] = Settings->Data.Debug_Slow / 10;
                        o_Connection->send_Cmd('d', ADDRESS_ALL, TX_Data, 1, false);
                    }
                break;
                case 4 :
                    {
                        for (int z = 0; z<12; z++)
                        {
                            TX_Data[z] = Motor.Speed[z];
                        }
                        o_Connection->send_Cmd('t', ADDRESS_FC, TX_Data, 12, false);
                    }

            }
        }
    }
}
*/


// connect to QMK dataserver
void MKTool::slot_QMKS_Connect()
{
    if (ac_QMKServer->isChecked())
    {
        lb_Status->setText(tr("Verbinde zum QMK-Datenserver."));

        QMK_Server->Connect(Settings->Server.QMKS_Host, Settings->Server.QMKS_Port.toInt(), Settings->Server.QMKS_Login, Settings->Server.QMKS_Password);

        connect(QMK_Server, SIGNAL(sig_Connected()), this, SLOT(slot_QMKS_Connected()));
        connect(QMK_Server, SIGNAL(sig_Disconnected(int)), this, SLOT(slot_QMKS_Disconnected(int)));
    }
    else
    {
        if ((QMK_Server->property("Connect")) == true)
        {
            disconnect(QMK_Server, SIGNAL(sig_Disconnected(int)), 0, 0);
            lb_Status->setText(tr("Trenne vom QMK-Datenserver."));

            QMK_Server->Disconnect();
            QMK_Server->setProperty("Connect", false);
            ac_QMKServer->setText(tr("QMK-Server Verbinden"));
        }
    }
}

// Verbindung zum QMK-Server hergestellt.
void MKTool::slot_QMKS_Connected()
{
    QMK_Server->setProperty("Connect", true);
    ac_QMKServer->setText(tr("QMK-Server Trennnen"));
    lb_Status->setText(tr("Verbunden mit QMK-Datenserver."));
}

// QMK-Serververbindung getrennt
void MKTool::slot_QMKS_Disconnected(int Error)
{
    QMK_Server->setProperty("Connect", false);
    ac_QMKServer->setText(tr("QMK-Server Verbinden"));
    ac_QMKServer->setChecked(false);

    disconnect(QMK_Server, SIGNAL(sig_Disconnected(int)), 0, 0);

    switch (Error)
    {
        case 1 :
        {
            lb_Status->setText(tr("Verbindung vom Server beendet."));
            QMessageBox::warning(this, QA_NAME,tr("QMK-Datenserver: Verbindung wurde vom Server beendet."), QMessageBox::Ok);
        }
        break;
        case 2 :
        {
            lb_Status->setText(tr("Server nicht gefunden."));
            QMessageBox::warning(this, QA_NAME,tr("QMK-Datenserver: Kann nicht zum Server verbinden."), QMessageBox::Ok);
        }
        break;
        case 3 :
        {
            lb_Status->setText(tr("Serververbindung getrennt. Logindaten falsch."));
            QMessageBox::warning(this, QA_NAME,tr("QMK-Datenserver: Loginname oder Password falsch."), QMessageBox::Ok);
        }
        break;
        default :
        {
            lb_Status->setText(tr("Getrennt vom QMK-Datenserver."));
        }
        break;
    }
}

// Slots der Actions (Menüpunkte, Buttons)
//////////////////////////////////////////
void MKTool::slot_ac_Motortest()
{
    dlg_Motortest *f_Motortest = new dlg_Motortest(this);

//    connect(f_Motortest, SIGNAL(updateMotor(int, int, int, int)), this, SLOT(slot_Motortest(int, int, int, int)));
    connect(f_Motortest, SIGNAL(updateMotor(sMotor)), this, SLOT(slot_Motortest(sMotor)));

//FIXME: Move Ticker to libMK/QTCommunication.cpp
//    Ticker->setInterval(500);
//    TickerEvent[4] = true;

    if (f_Motortest->exec()==QDialog::Accepted)
    {
    }

    disconnect(f_Motortest, 0,0,0);

    handler->reset_motor();
//FIXME: Move Ticker to libMK/QTCommunication.cpp
//    Ticker->setInterval(2000);
//    TickerEvent[4] = false;
}

void MKTool::slot_Motortest(sMotorData p_Motor)
{
    handler->motor_test(p_Motor);
}

// Motormixer-Einstellungen anzeigen
void MKTool::slot_ac_MotorMixer()
{
    f_MotorMixer->set_Objects(handler, Settings);
    handler->read_motor_mixer();

    if (f_MotorMixer->exec()==QDialog::Accepted)
    {
    }
}

// LCD Anzeigen
void MKTool::slot_ac_LCD()
{
    if (!f_LCD->isVisible())
    {
        delete f_LCD;
        f_LCD = new dlg_LCD(this);

        // LCD auf / ab
        connect(f_LCD->pb_LCDup,   SIGNAL(clicked()), this, SLOT(slot_LCD_UP()));
        connect(f_LCD->pb_LCDdown, SIGNAL(clicked()), this, SLOT(slot_LCD_DOWN()));
        f_LCD->show();
        handler->show_lcd();
        //FIXME: replace ticker with something else???
        //Ticker->setInterval(500);
        //TickerEvent[2] = true;
    }
}

// Map-Fenster anzeigen
void MKTool::slot_ac_Map()
{
    if (!f_Map->isVisible())
    {
        f_Map->show();
    }
}

void MKTool::slot_MAP_SetWayPoints(QList<sWayPoint> l_WayPoints)
{
    double Longitude, Latitude;

    // delete waypoint-list
    handler->delete_waypoints();
    ToolBox::wait(SLEEP);

    for (int z = 0; z < l_WayPoints.count(); z++)
    {
        Longitude = l_WayPoints[z].Longitude;
        Latitude  = l_WayPoints[z].Latitude;

        if (Longitude < 100)
            Longitude *= 10000000+0.5;

        if (Latitude < 100)
            Latitude *= 10000000+0.5;

        Waypoint_t WayPoint;
        //fülle Wegpunkt-Daten
        WayPoint.Position.Altitude = 0;
        WayPoint.Position.Longitude = int32_t(Longitude);
        WayPoint.Position.Latitude =  int32_t(Latitude);
        WayPoint.Position.Status = NEWDATA;
        WayPoint.Heading = -1;
        WayPoint.ToleranceRadius = 5;
        WayPoint.HoldTime = l_WayPoints[z].Time;
        WayPoint.Event_Flag = 0;
        WayPoint.reserve[0] = 0; // reserve
        WayPoint.reserve[1] = 0; // reserve
        WayPoint.reserve[2] = 0; // reserve
        WayPoint.reserve[3] = 0; // reserve

        handler->add_waypoint(WayPoint);
//        ToolBox::Wait(SLEEP);
    }
}

void MKTool::slot_MAP_SetTarget(sWayPoint Target)
{

    QString s_Lon, s_Lat;
    QTextStream t_Lon(&s_Lon);
    QTextStream t_Lat(&s_Lat);

    t_Lon.setRealNumberPrecision(9);
    t_Lat.setRealNumberPrecision(9);
    t_Lon << Target.Longitude;
    t_Lat << Target.Latitude;

    le_TarLong->setText(s_Lon);
    le_TarLat->setText(s_Lat);
    sb_TarTime->setValue(Target.Time);

    slot_pb_SendTarget();
}

void MKTool::slot_ac_Config()
{
    set_Analog Old_Analog1;

    Old_Analog1 = Settings->Analog1;

    dlg_Config *f_Config = new dlg_Config(this);
    f_Config->set_Settings(Settings, data->mode.id);

    if (f_Config->exec()==QDialog::Accepted)
    {
        Settings = f_Config->get_Settings();
        Settings->write_Settings_Analog(data->mode.id);

        // Plotter neu einrichten
        if (Old_Analog1.PlotView != Settings->Analog1.PlotView)
        {
            config_Plot();
        }

        // CVS-Datei neu anlegen.
        if ((logger->is_active()) && (Old_Analog1.LogView != Settings->Analog1.LogView))
        {
            logger->close();
            logger->start_Log();
        }

    }
}

//aktualisiere Logging-Status
void MKTool::update_Log()
{
    if (logger->is_active())
    {

        ac_RecordCSV->setText(tr("Log Stop"));
        lb_Status->setText(tr("Log-Record gestartet."));
    }
    else
    {
        ac_RecordCSV->setText(tr("Log Aufzeichnen"));
        lb_Status->setText(tr("Log-Record gestopt."));
    }
}

//starte/stoppe Logging, wenn auf den entsprechenden Button gedrückt wurde
void MKTool::slot_RecordLog()
{
    if (!logger->is_active())
        logger->start_Log();
    else
        logger->close();

    update_Log();
}

void MKTool::slot_ac_Preferences()
{
    dlg_Preferences *f_Preferences = new dlg_Preferences(this);

    Settings->TTY.Port = le_Port->text();
    f_Preferences->set_Settings(Settings);

    if (f_Preferences->exec()==QDialog::Accepted)
    {
        Settings = f_Preferences->get_Settings();
        Settings->write_Settings();
        le_Port->setText(Settings->TTY.Port);
        config_Plot();
    }
}

void MKTool::slot_ac_StartPlotter()
{
    if (ac_StartPlotter->isChecked())
    {
        lb_Status->setText(tr("Datenplotter gestartet."));
        ac_StartPlotter->setText(tr("Stop Plotter"));
        pb_StartPlotter->setText(tr("Stop Plotter"));
    }
    else
    {
        lb_Status->setText(tr("Datenplotter gestopt."));
        ac_StartPlotter->setText(tr("Start Plotter"));
        pb_StartPlotter->setText(tr("Start Plotter"));
    }
}

void MKTool::slot_ac_View()
{
    int Aktive = -1;

    QAction *Action = (QAction*)sender();

    if (Action->objectName() == QString("ac_View0"))
        Aktive = 0;
    if (Action->objectName() == QString("ac_View1"))
        Aktive = 1;
    if (Action->objectName() == QString("ac_View2"))
        Aktive = 2;
    if (Action->objectName() == QString("ac_View3"))
        Aktive = 3;
    if (Action->objectName() == QString("ac_View4"))
        Aktive = 4;
    if (Action->objectName() == QString("ac_View5"))
        Aktive = 5;
    if (Action->objectName() == QString("ac_View6"))
        Aktive = 6;

    QString TabName = QString("Tab_%1").arg(Aktive);

    if (!Action->isChecked())
    {
        for (int a = 0; a < tab_Main->count(); a++)
        {
            if (tab_Main->widget(a)->objectName() == TabName)
            {
                tab_Main->removeTab(a);
            }
        }
    }
    else
    {
        tab_Main->insertTab(Aktive, TabWidgets[Aktive], Action->icon(), Action->text());
    }
}

void MKTool::slot_ac_FastNavi() // DONE NC 0.12i
{
    if (!ac_NoNavi->isChecked())
    {
        if (ac_FastNavi->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle NaviDaten an."));
            handler->set_navictrl_debug(Settings->Data.Navi_Fast / 10);
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame NaviDaten an."));
            handler->set_navictrl_debug(Settings->Data.Navi_Slow / 10);
        }
    }
}

void MKTool::slot_ac_NoNavi() // DONE NC 0.12i
{
    if (ac_NoNavi->isChecked())
    {
        lb_Status->setText(tr("NaviDaten abstellen."));
        handler->stop_navictrl_debug();
    }
    else
    {
        if (ac_FastNavi->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle NaviDaten an."));
            handler->set_navictrl_debug(Settings->Data.Navi_Fast / 10);
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame NaviDaten an."));
            handler->set_navictrl_debug(Settings->Data.Navi_Slow / 10);
        }
    }
}

void MKTool::slot_ac_FastDebug() // DONE 0.71g
{
    if (!ac_NoDebug->isChecked())
    {
        if (ac_FastDebug->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle DebugDaten an."));
            handler->set_all_debug(Settings->Data.Debug_Fast / 10);
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame DebugDaten an."));
            handler->set_all_debug(Settings->Data.Debug_Slow / 10);
        }
    }
}

void MKTool::slot_ac_NoDebug() // DONE 0.71g
{
    if (ac_NoDebug->isChecked())
    {
        lb_Status->setText(tr("DebugDaten abstellen."));
//FIXME: Move Ticker to libMK/QTCommunication.cpp
//        TickerEvent[3] = false;
        handler->stop_all_debug();
    }
    else
    {
        // Wenn MK3MAG dann andauernd Daten neu anfragen.
//FIXME: Move Ticker to libMK/QTCommunication.cpp
/*        if (Mode.ID == ADDRESS_MK3MAG)
            TickerEvent[3] = true;*/


        if (ac_FastDebug->isChecked())
        {
            lb_Status->setText(tr("Fordere schnelle DebugDaten an."));
            handler->set_all_debug(Settings->Data.Debug_Fast / 10);
        }
        else
        {
            lb_Status->setText(tr("Fordere langsame DebugDaten an."));
            handler->set_all_debug(Settings->Data.Debug_Slow / 10);
        }
    }
}

void MKTool::slot_ac_About()
{
    QMessageBox::about(this, trUtf8(("Über ")) + QA_NAME, QA_ABOUT);
}

void MKTool::slot_ac_GetLabels() // DONE 0.71g
{
    lb_Status->setText(tr("Analoglabels auslesen."));
    handler->get_analog();
}

void MKTool::slot_ac_StartServer()
{
    if (ac_StartServer->isChecked())
    {
        lb_Status->setText(tr("KML-Server gestartet."));
        KML_Server->start_Server(Settings->Server.Port.toInt(), Settings);
    }
    else
    {
        lb_Status->setText(tr("KML-Server gestopt."));
        KML_Server->stop_Server();
    }
}


//  Daten-Plotter
/////////////////
void MKTool::update_Plot()
{
    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a]->setData(aID,aData[a],NextPlot - 1);
    }

    if ((NextPlot > Settings->Data.Plotter_Count))
    {
        scroll_plot->setMaximum(NextPlot - Settings->Data.Plotter_Count);
    }

    if ((scroll_plot->value() == NextPlot - (Settings->Data.Plotter_Count + 1)))
    {
        qwtPlot->setAxisScale(QwtPlot::xBottom,NextPlot - Settings->Data.Plotter_Count,NextPlot,0);
        scroll_plot->setValue(NextPlot - Settings->Data.Plotter_Count);
    }

    qwtPlot->replot();
}

void MKTool::config_Plot()
{
//    qDebug("Plotter rekonfiguriert..!!");
    qwtPlot->setAxisScale(QwtPlot::xBottom,0,Settings->Data.Plotter_Count,0);

    for (int a = 0; a < MaxAnalog; a++)
    {
        Plot[a]->detach();
        Plot[a]->setPen(QPen(QColor(Def_Colors[a])));

        if (Settings->Analog1.PlotView[a])
        {
            Plot[a]->setTitle(Settings->Analog1.Label[a]);
            Plot[a]->attach(qwtPlot);
        }
    }
    qwtPlot->replot();
}

void MKTool::slot_ScrollPlot(int Pos)
{
    qwtPlot->setAxisScale(QwtPlot::xBottom,Pos,Pos + Settings->Data.Plotter_Count,0);
    qwtPlot->replot();
}


// Firmeware-Update
///////////////////
void MKTool::slot_pb_Update()
{
    QString Device;
    QString Hardware;

    if (rb_FC->isChecked())
    {
        Device   = "m644";
        Hardware = "FlightCtrl";
    }
    else if (rb_MK3MAG->isChecked())
    {
        Device   = "m168";
        Hardware = "MK3MAG";
    }
    else if (rb_BL->isChecked())
    {
        Device   = "m8";
        Hardware = "BL-Ctrl";
    }

    QString Message = trUtf8("Firmeware-Datei \n\n");
    Message = Message + le_HexFile->text() + "\n\n";
    Message = Message + trUtf8("an ") + Hardware + trUtf8(" mit AVRDUDE - Seriel & Bootloader über ") + le_Port->text() + trUtf8(" übertragen?\n");

    if (le_HexFile->text() == "")
    {
        QMessageBox::warning(this, QA_NAME, trUtf8("Bitte Firmeware-Datei wählen."), QMessageBox::Ok);
    }
    else if (QMessageBox::warning(this, QA_NAME, Message, QMessageBox::Yes | QMessageBox::No) == QMessageBox::Yes)
    {
        QString Programm = Settings->DIR.AVRDUDE;

        QStringList Argumente;

        Update = new QProcess();

//FIXME: put this in QTCommunication.cpp
/*        if (o_Connection->isOpen())
        {
            slot_OpenPort();
        }
*/

        Argumente << "-P";
        Argumente << le_Port->text();
        Argumente << "-p";
        Argumente << Device;
        Argumente << "-c";
        Argumente << "butterfly";
        Argumente << "-b";
        Argumente << "57600";
        Argumente << "-U";
        Argumente << "flash:w:" + le_HexFile->text();

//    QString Programm = "/home/Manuel/bin/avrdude -p m644 -P /dev/ttyS0 -c butterfly -b 57600 -U flash:w:/home/Manuel/Documents/Mikrokopter/Firmeware/FlightCtrl/Flight-Ctrl_MEGA644_V0_71h.hex";

        te_Shell->setText(""); // Ausgabefenster säubern

        connect(Update, SIGNAL(readyReadStandardOutput()), this, SLOT(slot_UpdateShell()) );
        connect(Update, SIGNAL(readyReadStandardError()), this, SLOT(slot_UpdateShell()) );

        Update->start(Programm, Argumente); // Programmaufruf
    }
}

void MKTool::slot_UpdateShell()
{
    QByteArray Output;

    Output = Update->readAllStandardError(); // Shellausgabe an Variable
    te_Shell->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
    te_Shell->insertPlainText(QString::fromUtf8(Output));

    Output = Update->readAll();
    te_Shell->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
    te_Shell->insertPlainText(QString::fromUtf8(Output));
}

void MKTool::slot_pb_HexFile()
{
    QString FileName = QFileDialog::getOpenFileName(this,trUtf8(("Firmeware-Datei wählen")),"",
                                tr("Intel Hex(*.hex);;Alle Dateien (*)"));
    if (!FileName.isEmpty())
    {
        le_HexFile->setText(FileName);
    }
}


// Wechsel der Tabs erkennen
void MKTool::slot_TabChanged(int Tab) // DONE 0.71g
{
    Tab = Tab;
    if (tab_Main->count() != 0)
    {
        if ((tab_Main->currentWidget()->objectName() == QString("Tab_2")) && (f_Settings->listWidget->currentRow() == 1))
        {
//FIXME: Do we really need the ppm-channels if we change the page?
// maybe this is a bug or the description on
// http://www.mikrokopter.com/ucwiki/en/SerialCommands
// is WRONG!
            handler->get_ppm_channels();
//FIXME: Move Ticker to libMK/QTCommunication.cpp
//            Ticker->setInterval(500);
//            TickerEvent[1] = true;
        }
        else
        {
//FIXME: Move Ticker to libMK/QTCommunication.cpp
//            Ticker->setInterval(2000);
//            TickerEvent[1] = false;
        }
    }
}

// LCD-Seiten weiterschalten
void MKTool::slot_LCD_UP() // DONE 0.71g
{
    handler->lcd_up();
}

void MKTool::slot_LCD_DOWN() // DONE 0.71g
{
    handler->lcd_down();
}

// Settings aus MK lesen / in MK schreiben
void MKTool::slot_GetFCSettings() // DONE 0.71g
{
    lb_Status->setText(tr("Lese FlightCtrl-Settings aus."));
    handler->get_flightctrl_settings(f_Settings->sb_Set->value());
}

void MKTool::slot_SetFCSettings() // DONE 0.71g
{
    handler->set_flightctrl_settings(f_Settings->GetFCSettings());
    lb_Status->setText(tr("Schreibe FlightCtrl-Settings."));
}


// Save GUI-Preferences
///////////////////////
void MKTool::set_Preferences()
{
    Settings->GUI.TabViews.setBit(0, ac_View0->isChecked());
    Settings->GUI.TabViews.setBit(1, ac_View1->isChecked());
    Settings->GUI.TabViews.setBit(2, ac_View2->isChecked());
    Settings->GUI.TabViews.setBit(3, ac_View3->isChecked());
    Settings->GUI.TabViews.setBit(4, ac_View4->isChecked());
    Settings->GUI.TabViews.setBit(5, ac_View5->isChecked());
    Settings->GUI.TabViews.setBit(6, ac_View6->isChecked());

    Settings->GUI.ToolViews.setBit(0, tb_Allgemein->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(1, tb_Werkzeuge->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(2, tb_Debug->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(3, tb_TTY->isVisibleTo(this));
    Settings->GUI.ToolViews.setBit(4, tb_Hardware->isVisibleTo(this));

    Settings->GUI.Term_Info   = cb_ShowMSG->isChecked();
    Settings->GUI.Term_Data   = cb_ShowData->isChecked();
    Settings->GUI.Term_Always = cb_ShowAlways->isChecked();
    Settings->GUI.Term_Send   = cb_ShowSend->isChecked();
    Settings->GUI.isMax       = isMaximized();
    Settings->GUI.Size        = size();
    Settings->GUI.Point       = pos();

    Settings->TTY.Port = le_Port->text();
}

void MKTool::show_DebugData()
{
//FIXME: log analogdata in libMK/Communication.h or libMK/Parser.h
/*    if (logger->is_active())
        logger->write(AnalogData);*/


    if (ac_StartPlotter->isChecked())
    {
        aID[NextPlot] = NextPlot;
        //FIXME: get analogData from handler
        /*
        for (int a = 0; a < MaxAnalog; a++)
        {
            aData[a][NextPlot] = AnalogData[a];
        }*/

        NextPlot++;

        if ((tab_Main->currentWidget()->objectName() == QString("Tab_1")))
            update_Plot();
    }

    //fill labels with analog values from data
    for (int i = 0; i < 32; i++) {
        le_Analog[i]->setText(QString("%1").arg(data->analogData[i]));
    }

    if ((data->mode.id == ADDRESS_FC) && (FCSettings[P_GYRO_ACC_FAKTOR] > 0))
    {
        //set battery
        //TODO: save battery, compas and link quality directly in data (data->battery)
        bar_UBAT->setValue(data->analogData[9]);
        //link quality
        bar_RX->setValue(data->analogData[10]);
        //compas
        Compass->setValue(data->analogData[8]);

        int Roll = (data->analogData[1] * FCSettings[P_GYRO_ACC_FAKTOR]) / 1024;
        int Nick = (data->analogData[0] * FCSettings[P_GYRO_ACC_FAKTOR]) / 1024;

        if (Roll > 128)
            Roll = Roll - 255;

        if (Nick > 128)
            Nick = Nick - 255;

        Attitude->setAngle(Roll);
        Attitude->setGradient(double(double(Nick) / 100.0));
    }
}

//FIXME: HERE!
/*
void MKTool::new_NaviData(sRxData RX)
{
//    qDebug("Navi-Data");
    sNaviData navi = data->navi;
    switch(RX.decode[N_NC_FLAGS])
    {
        case 0x01 : lb_Mode->setText(tr("Free")); break;
        case 0x02 : lb_Mode->setText(tr("Position Hold")); break;
        case 0x04 : lb_Mode->setText(tr("Coming Home")); break;
        case 0x08 : lb_Mode->setText(tr("Range Limit")); break;
        case 0x10 : lb_Mode->setText(tr("Serial Error")); break;
        case 0x20 : lb_Mode->setText(tr("Target reached")); break;
        case 0x40 : lb_Mode->setText(tr("Manual Control")); break;
    }

    navi.Current.Longitude = Parser::dataToLong(RX.decode, N_CUR_LONGITUDE, true);
    navi.Current.Latitude  = Parser::dataToLong(RX.decode, N_CUR_LATITUDE,  true);
    navi.Current.Altitude  = Parser::dataToLong(RX.decode, N_CUR_ALTITUDE,  true);
    navi.Target.Longitude  = Parser::dataToLong(RX.decode, N_TAR_LONGITUDE, true);
    navi.Target.Latitude   = Parser::dataToLong(RX.decode, N_TAR_LATITUDE,  true);
    navi.Target.Altitude   = Parser::dataToLong(RX.decode, N_TAR_ALTITUDE,  true);

    le_CDistance->setText(QString("%1 cm").arg(Parser::dataToInt(RX.decode, N_HOME_DISTANCE)));
    le_CWPA->setText(QString("%1").arg(RX.decode[N_WP_INDEX]));
    le_CWPT->setText(QString("%1").arg(RX.decode[N_WP_NUMBER]));
    le_CSats->setText(QString("%1").arg(RX.decode[N_SATS_IN_USER]));

    qwt_Rate->setValue(double(Parser::dataToInt(RX.decode, N_VARIOMETER, true)));

    le_CTime->setText(QString("%1 sec.").arg(Parser::dataToInt(RX.decode, N_FLYING_TIME)));

    bar_UBAT->setValue(RX.decode[N_UBAT]);

    double Speed = double((Parser::dataToLong(RX.decode, N_GROUND_SPEED)) / 10.0);

    if ((Speed > 4.5) && SpeedMeter->property("END") == 5)
    {
        SpeedMeter->setRange(0.0, 10.0);
        SpeedMeter->setScale(1, 2, 1);
        SpeedMeter->setProperty("END", 10);
    }

    if ((Speed > 9) && SpeedMeter->property("END") == 10)
    {
        SpeedMeter->setRange(0.0, 20.0);
        SpeedMeter->setScale(1, 2, 2);
        SpeedMeter->setProperty("END", 20);
    }

    SpeedMeter->setValue(Speed);

    Compass->setValue(Parser::dataToInt(RX.decode, N_COMAPSS_HEADING)); //(68)

    bar_RX->setValue(RX.decode[N_RC_QUALITY]);

    int Nick = RX.decode[N_ANGLE_NICK];
    int Roll = RX.decode[N_ANGLE_ROLL];

    if (Roll > 128)
        Roll = Roll - 255;

    if (Nick > 128)
        Nick = Nick - 255;

    Attitude->setAngle(Roll);
    Attitude->setGradient(double(0.0 - (double(Nick) / 100.0)));

    sNaviData naviData;
 
    naviData.Longitude = Parser::getFloat(navi.Current.Longitude,7);
    naviData.Latitude  = Parser::getFloat(navi.Current.Latitude,7);
    naviData.Altitude  = Parser::getFloat(navi.Current.Altitude,3);

    le_CurLong->setText(QString::number(naviData.Longitude));
    le_CurLat->setText(QString::number(naviData.Latitude));

    KML_Server->store_NaviString(naviData);

    f_Map->add_Position(naviData.Longitude, naviData.Latitude);

    if ((QMK_Server->property("Connect")) == true)
    {
//        qDebug("Send Data to Server...");
        QMK_Server->NewPosition(naviData);
    }
}
*/

// Kopter-Kommunikations-Bereich, Befehle senden und Daten empfangen
////////////////////////////////////////////////////////////////////

// Neues Datenpacket empfangen -> Verarbeiten
//FIXME: HERE!
/*void MKTool::slot_newData(sRxData RX) // DONE 0.71g
{
    //handler->receiveData(RX)

    // TODO: Roh-Daten senden zum QMK-Server dazu Sendebuffer bauen.
    if ((QMK_Server->property("Connect")) == true)
    {
//        QMK_Server->send_RawData(RX.String);
    }

    slot_showTerminal(1, QString(RX.str.c_str()));
}
*/

void MKTool::slot_showTerminal(int Typ, QString Text)
{
    switch(Typ)
    {
        case 1 :
        {
            if ((cb_ShowData->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) || (cb_ShowAlways->isChecked())))
            {
                te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
                te_RX->insertHtml("<span style=\"color:#00008b;\">" + Text + "<br /></span>");
            }
        }
        break;
        case 2 :
        {
            if ((cb_ShowMSG->isChecked()) && ((tab_Main->currentWidget()->objectName() == QString("Tab_3")) || (cb_ShowAlways->isChecked())))
            {
                if (Text.length() > 0)
                {
                    te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
                    te_RX->insertHtml("<span style=\"color:#008b00;\">" + Text + "</span><br />");
                }
            }
        }
        break;
        case 3 :
        {
            if (cb_ShowSend->isChecked())
            {
                te_RX->moveCursor(QTextCursor::End,  QTextCursor::MoveAnchor);
                te_RX->insertHtml("<span style='color:#8b0000;'>" + Text + "<br /></span>");
            }
        }
        break;
    }
}

// connect to MK
void MKTool::slot_serial_connect()
{
    //connect to Mikrokopter
    com->connect_MK(le_Port->text().toAscii().data());
    //TODO: check, if connection really is established
    ac_ConnectTTY->setText(tr("Kopter Trennen"));

    le_Port->setEnabled(false);

    //send command to get version of MK
    handler->get_version();

    //TODO: Ticker->start(2000);
    //TODO: disconnect

    //FIXME: Put this in libMK/QTCommunication.cpp
/*
    if (o_Connection->isOpen())
    {
        TX_Data[0] = Settings->Data.Debug_Off / 10;
        o_Connection->send_Cmd('d', ADDRESS_ALL, TX_Data, 1, false);
        ToolBox::wait(SLEEP);

        if (Mode.ID == ADDRESS_NC)
        {
            TX_Data[0] = Settings->Data.Navi_Off / 10;
            o_Connection->send_Cmd('o', ADDRESS_NC, TX_Data, 1, false);
            ToolBox::wait(SLEEP);
        }

        if (Mode.ID == ADDRESS_FC)
        {
            TX_Data[0] = 0;
            TX_Data[1] = 0;
            TX_Data[2] = 0;
            TX_Data[3] = 0;
            o_Connection->send_Cmd('t', ADDRESS_FC, TX_Data, 4, false);
            ToolBox::wait(SLEEP);
        }

        o_Connection->Close();

        ac_ConnectTTY->setText(tr("Kopter Verbinden"));
        le_Port->setEnabled(true);

        Ticker->stop();
    }
    else
    {
        int i_Type;
        if (le_Port->text().contains(QString("IP:")))
        {
            i_Type = C_IP;
        }
        else
        {
            i_Type = C_TTY;
        }

        if (o_Connection->Open(i_Type, le_Port->text()))
        {
            ac_ConnectTTY->setText(tr("Kopter Trennen"));
            le_Port->setEnabled(false);

            o_Connection->send_Cmd('v', ADDRESS_ALL, TX_Data, 0, true);

            Ticker->start(2000);
        }
    }
*/

}

// Programm beenden
///////////////////

MKTool::~MKTool()
{
//FIXME: Put this in libMK/QTCommunication.cpp
/*
    if (o_Connection->isOpen())
    {
        o_Connection->Close();
    }
*/

    set_Preferences();
    Settings->write_Settings();

    logger->close();
}