Subversion Repositories FlightCtrl

Rev

Rev 1995 | Blame | Compare with Previous | Last modification | View Log | RSS feed

#include <inttypes.h>
#include "main.h"

uint16_t LED1_Timing = 0;
uint16_t LED2_Timing = 0;
unsigned char J16Blinkcount = 0, J16Mask = 1;
unsigned char J17Blinkcount = 0, J17Mask = 1;

// initializes the LED control outputs J16, J17
void LED_Init(void)
{
        // set PC2 & PC3 as output (control of J16 & J17)
        DDRC |= (1<<DDC2)|(1<<DDC3);
        ///     J16_OFF; /// MartinW: removed because of switching during calibration, not useful for activate fireworks
        ///     J17_OFF;
        J16Blinkcount = 0; J16Mask = 128;
        J17Blinkcount = 0; J17Mask = 128;
}

// called in UpdateMotors() every 2ms
void LED_Update(void)
{
        static char delay = 0;
        static unsigned char J16Bitmask = 0;
        static unsigned char J17Bitmask = 0;
        static unsigned char J16Warn = 0, J17Warn = 0;
        if(!delay--)  // 20ms Intervall
        {
        delay = 9;
        if(FC_StatusFlags & (FC_STATUS_LOWBAT | FC_STATUS_EMERGENCY_LANDING) || (VersionInfo.HardwareError[1] & FC_ERROR1_I2C))
        {
                if(EE_Parameter.WARN_J16_Bitmask)
                 {
          if(!J16Warn) J16Blinkcount = 4;
          J16Warn = 1;
                 }
                if(EE_Parameter.WARN_J17_Bitmask)
                 {
          if(!J17Warn) J17Blinkcount = 4;
          J17Warn = 1;
                 }
        }
        else
        {
        J16Warn = 0;
        J17Warn = 0;
                J16Bitmask = EE_Parameter.J16Bitmask;
                J17Bitmask = EE_Parameter.J17Bitmask;
        }

 if(!J16Warn)
  {
  if((EE_Parameter.BitConfig & CFG_MOTOR_BLINK1) && !MotorenEin) {if(EE_Parameter.BitConfig & CFG_MOTOR_OFF_LED1) J16_ON; else J16_OFF;}
  else
  if((EE_Parameter.J16Timing > 247) && (Parameter_J16Timing > 220)) {if(J16Bitmask & 128) J16_ON; else J16_OFF;}
  else
  if((EE_Parameter.J16Timing > 247) && (Parameter_J16Timing == 5))  {if(J16Bitmask & 128) J16_OFF; else J16_ON;} // MartinW, if Led on/Off not working, trimm your R/C correctly. Not nessessary to modify J16Timing == 5
  else
  if(!J16Blinkcount--)
   {
         J16Blinkcount = Parameter_J16Timing / 2;
     if(J16Mask == 1) J16Mask = 128; else J16Mask /= 2;
     if(J16Mask & J16Bitmask) J16_ON; else J16_OFF;
   }
  }
  else
  if(!J16Blinkcount--)
   {
     J16Blinkcount = 10-1;
     if(J16Mask == 1) J16Mask = 128; else J16Mask /= 2;
     if(J16Mask & EE_Parameter.WARN_J16_Bitmask) J16_ON; else J16_OFF;
   }

 if(!J17Warn)
  {
  if((EE_Parameter.BitConfig & CFG_MOTOR_BLINK2) && !MotorenEin) {if(EE_Parameter.BitConfig & CFG_MOTOR_OFF_LED2) J17_ON; else J17_OFF;}
  else
  if((EE_Parameter.J17Timing > 247) && (Parameter_J17Timing > 220)) {if(J17Bitmask & 128) J17_ON; else J17_OFF;}
  else
  if((EE_Parameter.J17Timing > 247) && (Parameter_J17Timing == 5))  {if(J17Bitmask & 128) J17_OFF; else J17_ON;}
  else
  if(!J17Blinkcount--)
   {
         J17Blinkcount = Parameter_J17Timing / 2;
     if(J17Mask == 1) J17Mask = 128; else J17Mask /= 2;
     if(J17Mask & J17Bitmask) J17_ON; else J17_OFF;
   }
  }
  else
  if(!J17Blinkcount--)
   {
     J17Blinkcount = 10-1;
     if(J17Mask == 1) J17Mask = 128; else J17Mask /= 2;
     if(J17Mask & EE_Parameter.WARN_J17_Bitmask) J17_ON; else J17_OFF;
   }
 }
}