Subversion Repositories FlightCtrl

Rev

Rev 1926 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

#ifndef _CONFIGURATION_H
#define _CONFIGURATION_H

#include <inttypes.h>
#include <avr/io.h>

typedef struct {
  /*PMM*/uint8_t HeightD;
  /* P */uint8_t MaxHeight;
  /*PMM*/uint8_t HeightP;
  /* P */uint8_t Height_ACC_Effect;
  /* P */uint8_t CompassYawEffect;
  /* P */uint8_t unnused;

  /* P */uint8_t GyroPitchP;
  /* P */uint8_t GyroRollP;
  /* P */uint8_t GyroYawP;

  /* P */uint8_t IFactor;
  /* P */uint8_t UserParams[8];
  /* P */uint8_t ServoPitchControl;

  /* P */uint8_t GyroPitchD;  // LoopGasLimit in tool
  /* P */uint8_t GyroRollD;   // AxisCoupling1 in tool
  /* P */uint8_t GyroYawD;    // AxisCoupling2 in tool

  /* P */uint8_t AxisCouplingYawCorrection;
  /* P */uint8_t DynamicStability;
  /* P */uint8_t ExternalControl;
  /*PMM*/uint8_t J16Timing;
  /*PMM*/uint8_t J17Timing;
  /* P */uint8_t NaviGpsModeControl;
  /* P */uint8_t NaviGpsGain;
  /* P */uint8_t NaviGpsP;
  /* P */uint8_t NaviGpsI;
  /* P */uint8_t NaviGpsD;
  /* P */uint8_t NaviGpsACC;
  /*PMM*/uint8_t NaviOperatingRadius;
  /* P */uint8_t NaviWindCorrection;
  /* P */uint8_t NaviSpeedCompensation;
  int8_t KalmanK;
  int8_t KalmanMaxDrift;
  int8_t KalmanMaxFusion;
} dynamicParam_t;
extern dynamicParam_t dynamicParams;

typedef struct {
  uint8_t sourceIdx, targetIdx;
  uint8_t min, max;
} MMXLATION;

typedef struct {
  uint8_t sourceIdx, targetIdx;
} XLATION;

// values above 250 representing poti1 to poti4
typedef struct {
  uint8_t ChannelAssignment[8]; // see upper defines for details
  uint8_t GlobalConfig; // see upper defines for bitcoding
  uint8_t HeightMinGas; // Value : 0-100
  uint8_t HeightD; // Value : 0-250
  uint8_t MaxHeight; // Value : 0-32
  uint8_t HeightP; // Value : 0-32
  uint8_t Height_Gain; // Value : 0-50
  uint8_t Height_ACC_Effect; // Value : 0-250

  uint8_t StickElevatorP; // StickP in tool.
  uint8_t StickAileronsP;  // StickD in tool.
  uint8_t StickRudderP;   // StickYawP in tool.

  uint8_t Unused3;
  uint8_t Unused4;
  uint8_t GyroAccFactor; // Value : 1-64
  uint8_t CompassYawEffect; // Value : 0-32

  uint8_t GyroPitchP;  // GyroP in tool
  uint8_t GyroRollP;   // GyroI in tool
  uint8_t GyroYawP;    // GyroD in tool

  uint8_t LowVoltageWarning; // Value : 0-250
  uint8_t Unused5; // Value : 0-250     //Gaswert bei Empüngsverlust
  uint8_t Unused6; // Value : 0-250     // Zeitbis auf EmergencyGas geschaltet wird, wg. Rx-Problemen
  uint8_t Unused7; //
  uint8_t IFactor; // Value : 0-250
  uint8_t UserParams1[4]; // Value : 0-250

  uint8_t ControlSigns;
  uint8_t Unused9;
  uint8_t Unused10;

  uint8_t Unused11; // Value : 0-250     // Anschlag
  uint8_t ServoRefresh; // Value: 0-250      // Refreshrate of servo pwm output

  uint8_t Unused16;
  uint8_t Unused17;
  uint8_t Unused18;

  uint8_t GyroPitchD; // LoopGasLimit in tool
  uint8_t GyroRollD;  // loopThreshold in tool
  uint8_t GyroYawD;   // loopHysteresis in tool

  uint8_t Unused19;
  uint8_t Unused20;
  uint8_t GyroAccTrim; // 1/k  (Koppel_ACC_Wirkung)
  uint8_t DriftComp; // limit for gyrodrift compensation
  uint8_t Unused21; // PID limit for Attitude controller
  uint8_t UserParams2[4]; // Value : 0-250

  uint8_t J16Bitmask; // for the J16 Output
  uint8_t J16Timing; // for the J16 Output
  uint8_t J17Bitmask; // for the J17 Output
  uint8_t J17Timing; // for the J17 Output
  uint8_t ExternalControl; // for serial Control
  uint8_t BitConfig; // see upper defines for bitcoding
  uint8_t ServoPitchCompInvert; // Value : 0-250   0 oder 1  // WICHTIG!!! am Ende lassen
  uint8_t Reserved[4];
  int8_t Name[12];
} paramset_t;

#define  PARAMSET_STRUCT_LEN  sizeof(paramset_t)

extern paramset_t staticParams;

typedef struct {
  uint8_t Revision;
  int8_t Name[12];
  int8_t Motor[16][4];
}__attribute__((packed)) MixerTable_t;

extern MixerTable_t Mixer;

// MKFlags
#define MKFLAG_MOTOR_RUN        (1<<0)
#define MKFLAG_FLY              (1<<1)
#define MKFLAG_CALIBRATE        (1<<2)
#define MKFLAG_START            (1<<3)
#define MKFLAG_EMERGENCY_LANDING (1<<4)
#define MKFLAG_RESERVE1         (1<<5)
#define MKFLAG_RESERVE2         (1<<6)
#define MKFLAG_RESERVE3         (1<<7)

// bit mask for staticParams.GlobalConfig
#define CFG_HEIGHT_CONTROL      (1<<0)
#define CFG_HEIGHT_SWITCH       (1<<1)
#define CFG_HEADING_HOLD        (1<<2)
#define CFG_COMPASS_ACTIVE      (1<<3)
#define CFG_COMPASS_FIX         (1<<4)
#define CFG_GPS_ACTIVE          (1<<5)
#define CFG_AXIS_COUPLING_ACTIVE (1<<6)
#define CFG_ROTARY_RATE_LIMITER (1<<7)

// bit mask for staticParams.BitConfig
#define CFG_LOOP_UP                 (1<<0)
#define CFG_LOOP_DOWN           (1<<1)
#define CFG_LOOP_LEFT           (1<<2)
#define CFG_LOOP_RIGHT          (1<<3)
#define CFG_HEIGHT_3SWITCH      (1<<4)

#define ATMEGA644       0
#define ATMEGA644P      1
#define SYSCLK F_CPU

// Not really a part of configuration, but LEDs and HW version test are the same.
#define RED_OFF   {if((BoardRelease == 10) || (BoardRelease == 20)) PORTB &=~(1<<PORTB0); else  PORTB |= (1<<PORTB0);}
#define RED_ON    {if((BoardRelease == 10) || (BoardRelease == 20)) PORTB |= (1<<PORTB0); else  PORTB &=~(1<<PORTB0);}
#define RED_FLASH PORTB ^= (1<<PORTB0)
#define GRN_OFF   {if(BoardRelease  < 12) PORTB &=~(1<<PORTB1); else PORTB |= (1<<PORTB1);}
#define GRN_ON    {if(BoardRelease  < 12) PORTB |= (1<<PORTB1); else PORTB &=~(1<<PORTB1);}
#define GRN_FLASH PORTB ^= (1<<PORTB1)

// Mixer table
#define MIX_THROTTLE    0
#define MIX_PITCH       1
#define MIX_ROLL        2
#define MIX_YAW         3

extern volatile uint8_t MKFlags;
extern int16_t variables[8]; // The "Poti"s.
extern uint8_t BoardRelease;
extern uint8_t CPUType;

void configuration_staticToDynamic(void);
uint8_t getCPUType(void);
uint8_t getBoardRelease(void);

#endif // _CONFIGURATION_H