Subversion Repositories NaviCtrl

Compare Revisions

Ignore whitespace Rev 746 → Rev 747

/tags/V2.14c/menu.c
0,0 → 1,707
/*#######################################################################################*/
/* !!! THIS IS NOT FREE SOFTWARE !!! */
/*#######################################################################################*/
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Copyright (c) 2008 Ingo Busker, Holger Buss
// + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY
// + FOR NON COMMERCIAL USE ONLY
// + www.MikroKopter.com
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation),
// + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist.
// + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt
// + bzgl. der Nutzungsbedingungen aufzunehmen.
// + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen,
// + Verkauf von Luftbildaufnahmen, usw.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht,
// + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts
// + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de"
// + eindeutig als Ursprung verlinkt werden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion
// + Benutzung auf eigene Gefahr
// + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur
// + mit unserer Zustimmung zulässig
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
// + Redistributions of source code (with or without modifications) must retain the above copyright notice,
// + this list of conditions and the following disclaimer.
// + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived
// + from this software without specific prior written permission.
// + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted
// + for non-commercial use (directly or indirectly)
// + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted
// + with our written permission
// + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be
// + clearly linked as origin
// + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed
//
// + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
// + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// + POSSIBILITY OF SUCH DAMAGE.
// ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#include <stdlib.h>
#include "91x_lib.h"
#include "main.h"
#include "led.h"
#include "ubx.h"
#include "GPS.h"
#include "timer1.h"
#include "compass.h"
#include "spi_slave.h"
#include "menu.h"
#include "uart0.h"
#include "uart1.h"
#include "ncmag.h"
#include "logging.h"
#include "settings.h"
#include "sdc.h"
#include "analog.h"
#include "canbus.h"
#include "triggerlog.h"
#include "CamCtrl.h"
 
u8 DispPtr = 0;
s8 DisplayBuff[DISPLAYBUFFSIZE];
 
 
u8 MenuItem = 0;
u8 MaxMenuItem = 30;
 
void Menu_Putchar(char c)
{
if(DispPtr < DISPLAYBUFFSIZE) DisplayBuff[DispPtr++] = c; ;
}
 
void Menu_Clear(void)
{
u8 i;
for( i = 0; i < DISPLAYBUFFSIZE; i++) DisplayBuff[i] = ' ';
}
 
// Display with 20 characters in 4 lines
void Menu_Update(u8 Keys)
{
s32 i1,i2;
u8 sign;
 
if(Keys & KEY1) { if(MenuItem > 0) MenuItem--; else MenuItem = MaxMenuItem;}
if(Keys & KEY2) { if(MenuItem == MaxMenuItem) MenuItem = 0; else MenuItem++;}
if((Keys & KEY1) && (Keys & KEY2)) MenuItem = 0;
if(MenuItem > MaxMenuItem) MenuItem = MaxMenuItem;
Menu_Clear();
// print menu item number in the upper right corner
if(MenuItem < 10)
{
LCD_printfxy(17,0,"[%i]",MenuItem);
}
else // Menuitem >= 10
{
LCD_printfxy(16,0,"[%i]",MenuItem);
}
 
switch(MenuItem)
{
// Version Info
case 0:
if(IamMaster == SLAVE) LCD_printfxy(0,0,"+ Navi-Ctrl (S) +")
else
if(IamMaster == MASTER)LCD_printfxy(0,0,"+ Navi-Ctrl (M) +")
else LCD_printfxy(0,0,"++ Navi-Ctrl ++")
 
LCD_printfxy(0,1,"HW V%d.%d SW V%d.%02d%c", UART_VersionInfo.HWMajor/10, UART_VersionInfo.HWMajor%10, VERSION_MAJOR, VERSION_MINOR, 'a'+ VERSION_PATCH);
if(FC.StatusFlags3 & FC_STATUS3_REDUNDANCE_AKTIVE) LCD_printfxy(19,1,"R");
if(ErrorCode)
{
LCD_printfxy(0,2,"Error: %d",ErrorCode);
LCD_printfxy(0,3,"%s",ErrorMSG);
}
else
if(Partner.ErrorCode)
{
if(IamMaster == SLAVE) LCD_printfxy(0,2,"Master Err: %d",Partner.ErrorCode)
else LCD_printfxy(0,2,"Slave Err: %d",Partner.ErrorCode);
LCD_printfxy(0,3,"%s",PartnerErrorMSG);
}
else
{
LCD_printfxy(0,2,"Set:%d %s", Parameter.ActiveSetting,EE_Parameter.Name);
LCD_printfxy(0,3,"%s",ErrorMSG);
// LCD_printfxy(0,3,"(c) HiSystems GmbH");
}
if(FC.StatusFlags3 & FC_STATUS3_BOAT) LCD_printfxy(16,2,"BOAT");
break;
case 1:
if(IamMaster == SLAVE) LCD_printfxy(0,0,"++ Master - NC ++")
else LCD_printfxy(0,0,"++ Slave - NC ++");
if(CanRxMessage[CAN_ID_VERSION].D.Byte[3])
{
LCD_printfxy(0,1,"HW V%d.%d SW V%d.%02d%c", CanRxMessage[CAN_ID_VERSION].D.Byte[3]/10, CanRxMessage[CAN_ID_VERSION].D.Byte[3]%10, CanRxMessage[CAN_ID_VERSION].D.Byte[7], CanRxMessage[CAN_ID_VERSION].D.Byte[6], 'a'+ CanRxMessage[CAN_ID_VERSION].D.Byte[5]);
if(Partner.ErrorCode)
{
if(IamMaster == SLAVE) LCD_printfxy(0,2,"Master Err: %d",Partner.ErrorCode)
else LCD_printfxy(0,2,"Slave Err: %d",Partner.ErrorCode);
}
else
{
LCD_printfxy(0,2,"Set:%d", CanRxMessage[CAN_ID_VERSION].D.Byte[1]);
}
LCD_printfxy(0,3,"%s",PartnerErrorMSG);
if(Partner.StatusFlags3 & FC_STATUS3_BOAT) LCD_printfxy(16,2,"BOAT");
}
else
LCD_printfxy(0,2,"not connected", CanTxMessage[CAN_ID_VERSION].D.Byte[1]);
break;
case 2:
if (GPSData.Status == INVALID)
{
LCD_printfxy(0,0,"No GPS data");
LCD_printfxy(0,1,"Lon: ");
LCD_printfxy(0,2,"Lat: ");
LCD_printfxy(0,3,"Alt: ");
}
else // newdata or processed
{
LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
switch (GPSData.SatFix)
{
case SATFIX_NONE:
LCD_printfxy(7,0,"NoFix");
break;
case SATFIX_2D:
LCD_printfxy(7,0,"2DFix");
break;
case SATFIX_3D:
LCD_printfxy(7,0,"3DFix");
break;
default:
LCD_printfxy(7,0,"??Fix");
break;
}
if(GPSData.Flags & FLAG_DIFFSOLN)
{
LCD_printfxy(12,0,"/DGPS");
}
else
{
LCD_printfxy(12,0," ");
}
 
if(GPSData.Position.Longitude < 0) sign = '-';
else sign = '+';
i1 = abs(GPSData.Position.Longitude)/10000000L;
i2 = abs(GPSData.Position.Longitude)%10000000L;
LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
if(GPSData.Position.Latitude < 0) sign = '-';
else sign = '+';
i1 = abs(GPSData.Position.Latitude)/10000000L;
i2 = abs(GPSData.Position.Latitude)%10000000L;
LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
if(GPSData.Position.Altitude < 0) sign = '-';
else sign = '+';
i1 = abs(GPSData.Position.Altitude)/1000L;
i2 = abs(GPSData.Position.Altitude)%1000L;
LCD_printfxy(0,3,"Alt:%c%04ld.%03ldm V%d", sign, i1, i2, GPS_Version/1000);
}
break;
case 3:
if (GPSData.Status == INVALID)
{
LCD_printfxy(0,0,"No GPS data");
LCD_printfxy(0,1,"Speed N: ");
LCD_printfxy(0,2,"Speed E: ");
LCD_printfxy(0,3,"Speed T: ");
}
else // newdata or processed
{
LCD_printfxy(0,0,"Sat:%02d ", GPSData.NumOfSats);
switch (GPSData.SatFix)
{
case SATFIX_NONE:
LCD_printfxy(7,0,"NoFix");
break;
case SATFIX_2D:
LCD_printfxy(7,0,"2DFix");
break;
case SATFIX_3D:
LCD_printfxy(7,0,"3DFix");
break;
default:
LCD_printfxy(7,0,"??Fix");
break;
}
if(GPSData.Flags & FLAG_DIFFSOLN)
{
LCD_printfxy(12,0,"/DGPS");
}
else
{
LCD_printfxy(12,0," ");
}
 
LCD_printfxy(0,1,"Speed N: %+4ld cm/s",GPSData.Speed_North);
LCD_printfxy(0,2,"Speed E: %+4ld cm/s",GPSData.Speed_East);
LCD_printfxy(0,3,"Speed T: %+4ld cm/s",GPSData.Speed_Top);
}
break;
case 4:
LCD_printfxy(0,0,"GPS UTC Time");
if (!SystemTime.Valid)
{
LCD_printfxy(0,1," ");
LCD_printfxy(0,2," No time data! ");
LCD_printfxy(0,3," ");
}
else // newdata or processed
{
LCD_printfxy(0,1," ");
LCD_printfxy(0,2,"Date: %02i/%02i/%04i",SystemTime.Month, SystemTime.Day, SystemTime.Year);
LCD_printfxy(0,3,"Time: %02i:%02i:%02i.%03i", SystemTime.Hour, SystemTime.Min, SystemTime.Sec, SystemTime.mSec);
}
break;
case 5: // Navi Params 1 from FC
LCD_printfxy(0,0,"NaviMode: %3i" , Parameter.NaviGpsModeControl);
LCD_printfxy(0,1,"G :%3i P :%3i ",Parameter.NaviGpsGain, Parameter.NaviGpsP);
LCD_printfxy(0,2,"I :%3i D :%3i ",Parameter.NaviGpsI, Parameter.NaviGpsD);
LCD_printfxy(0,3,"ACC:%3i SAT:%3i ",Parameter.NaviGpsACC, Parameter.NaviGpsMinSat);
break;
case 6: // Navi Params 2 from FC
LCD_printfxy(0,0,"Stick TS: %3i", Parameter.NaviStickThreshold);
LCD_printfxy(0,1,"WP_Radius: %3im",MaxWP_Radius_in_m);
LCD_printfxy(0,2,"WindCorr: %3i", Parameter.NaviWindCorrection);
LCD_printfxy(0,3,"AccComp: %3i", Parameter.NaviSpeedCompensation);
break;
case 7: // Navi Params 3 from FC
LCD_printfxy(0,0,"Angle-Limit: %3i", Parameter.NaviAngleLimitation);
LCD_printfxy(0,1," P-Limit: %3i", Parameter.NaviGpsPLimit);
LCD_printfxy(0,2," I-Limit: %3i", Parameter.NaviGpsILimit);
LCD_printfxy(0,3," D-Limit: %3i", Parameter.NaviGpsDLimit);
break;
case 8: // Max Ranges
LCD_printfxy(0,0,"Maximum flying ");
LCD_printfxy(0,1,"Range: %4im ", AbsoluteFlyingRange_m);
LCD_printfxy(0,2,"Descend: %4im ", AutoDescendRange_m);
LCD_printfxy(0,3,"Altitude:%4im ", AbsoluteFlyingAltitude);
if(!AbsoluteFlyingRange_m) LCD_printfxy(9,1,"disabled");
if(!AutoDescendRange_m) LCD_printfxy(9,2,"disabled");
if(!AbsoluteFlyingAltitude) LCD_printfxy(9,3,"disabled");
break;
case 9:
LCD_printfxy(0,0,"Home Position");
if(NaviData.HomePosition.Status == INVALID)
{
LCD_printfxy(0,1," ");
LCD_printfxy(0,2," Is not set. ");
LCD_printfxy(0,3," ");
}
else
{
if(NaviData.HomePosition.Longitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.HomePosition.Longitude)/10000000L;
i2 = abs(NaviData.HomePosition.Longitude)%10000000L;
LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
if(NaviData.HomePosition.Latitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.HomePosition.Latitude)/10000000L;
i2 = abs(NaviData.HomePosition.Latitude)%10000000L;
LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
if(NaviData.HomePosition.Altitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.HomePosition.Altitude)/1000L;
i2 = abs(NaviData.HomePosition.Altitude)%1000L;
LCD_printfxy(0,3,"Alt:%c%04ld.%1dm",sign, i1, i2/1000);
switch(Parameter.HomeYawMode)
{
case NO_CHANGE: LCD_printfxy(17,3,"(-)"); break;
case FRONT_TO_HOME: LCD_printfxy(17,3,"(F)"); break;
case REAR_TO_HOME: LCD_printfxy(17,3,"(R)"); break;
case LIKE_AT_START: LCD_printfxy(17,3,"(S)"); break;
}
}
break;
case 10:
LCD_printfxy(0,0,"Target Position");
if(NaviData.TargetPosition.Status == INVALID)
{
LCD_printfxy(0,1," ");
LCD_printfxy(0,2," Is not set. ");
LCD_printfxy(0,3," ");
}
else
{
if(NaviData.TargetPosition.Longitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.TargetPosition.Longitude)/10000000L;
i2 = abs(NaviData.TargetPosition.Longitude)%10000000L;
LCD_printfxy(0,1,"Lon:%c%03ld.%07ld deg",sign, i1, i2);
if(NaviData.TargetPosition.Latitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.TargetPosition.Latitude)/10000000L;
i2 = abs(NaviData.TargetPosition.Latitude)%10000000L;
LCD_printfxy(0,2,"Lat:%c%03ld.%07ld deg",sign, i1, i2);
if(NaviData.HomePosition.Altitude < 0) sign = '-';
else sign = '+';
i1 = abs(NaviData.TargetPosition.Altitude)/1000L;
i2 = abs(NaviData.TargetPosition.Altitude)%1000L;
LCD_printfxy(0,3,"Alt:%c%04ld.%03ldm",sign, i1, i2);
}
break;
case 11: // RC stick controls from FC
LCD_printfxy(0,0,"RC-Sticks" );
LCD_printfxy(0,1,"Ni:%4i Ro:%4i ",FC.StickNick, FC.StickRoll);
LCD_printfxy(0,2,"Gs:%4i Ya:%4i ",FC.StickGas, FC.StickYaw);
LCD_printfxy(0,3,"RC-Level: %3i", FC.RC_Quality); // Remote Control Level from FC
break;
case 12: // RC poti controls from FC
LCD_printfxy(0,0,"RC-Potis 1" );
LCD_printfxy(0,1,"Po1:%3i Po2:%3i ",FC.Poti[0], FC.Poti[1]);
LCD_printfxy(0,2,"Po3:%3i Po4:%3i ",FC.Poti[2], FC.Poti[3]);
break;
case 13: // RC poti controls from FC
LCD_printfxy(0,0,"RC-Potis 2" );
LCD_printfxy(0,1,"Po5:%3i Po6:%3i ",FC.Poti[4], FC.Poti[5]);
LCD_printfxy(0,2,"Po7:%3i Po8:%3i ",FC.Poti[6], FC.Poti[7]);
break;
case 14: // attitude from FC
if(FromFlightCtrl.AngleNick < 0) sign = '-';
else sign = '+';
i1 = abs(FromFlightCtrl.AngleNick)/10;
i2 = abs(FromFlightCtrl.AngleNick)%10;
LCD_printfxy(0,0,"GyroNick:%c%03ld.%01ld", sign, i1, i2);
if(FromFlightCtrl.AngleRoll < 0) sign = '-';
else sign = '+';
i1 = abs(FromFlightCtrl.AngleRoll)/10;
i2 = abs(FromFlightCtrl.AngleRoll)%10;
LCD_printfxy(0,1,"GyroRoll:%c%03ld.%01ld", sign, i1, i2);
if(FromFlightCtrl_AccNick < 0) sign = '-';
else sign = '+';
i1 = abs(FromFlightCtrl_AccNick)/10;
i2 = abs(FromFlightCtrl_AccNick)%10;
LCD_printfxy(0,2," AccNick:%c%03ld.%01ld", sign, i1, i2);
if(FromFlightCtrl_AccRoll < 0) sign = '-';
else sign = '+';
i1 = abs(FromFlightCtrl_AccRoll)/10;
i2 = abs(FromFlightCtrl_AccRoll)%10;
LCD_printfxy(0,3," AccRoll:%c%03ld.%01ld", sign, i1, i2);
break;
case 15:
LCD_printfxy(0,0,"Analog inputs");
LCD_printfxy(0,1,"A5:%3i ",AnalogData.Ch5);
LCD_printfxy(0,2,"A6:%3i ",AnalogData.Ch6);
LCD_printfxy(0,3,"A7:%3i ",AnalogData.Ch7);
break;
case 16:
LCD_printfxy(0,0,"Compass: %3i", FromFlightCtrl.GyroHeading / 10);
LCD_printfxy(0,1,"Man.-Offset:%3i", FC.FromFC_CompassOffset / 10);
if(FC.FromFC_DisableDeclination)
{
LCD_printfxy(0,2,"Mag.Declinat.:disabl");
}
else
{
if(GeoMagDec < 0) sign = '-';
else sign = '+';
LCD_printfxy(0,2,"Mag.Declinat.:%c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
}
LCD_printfxy(0,3,"True Compass: %3i", GyroCompassCorrected/10);
break;
case 17: // User Parameter
LCD_printfxy(0,0,"UP1:%3i UP2:%3i",Parameter.User1,Parameter.User2);
LCD_printfxy(0,1,"UP3:%3i UP4:%3i",Parameter.User3,Parameter.User4);
LCD_printfxy(0,2,"UP5:%3i UP6:%3i",Parameter.User5,Parameter.User6);
LCD_printfxy(0,3,"UP7:%3i UP8:%3i",Parameter.User7,Parameter.User8);
break;
case 18: // User Parameter
LCD_printfxy(0,0,"SD-Card Logs");
if(SDCardInfo.Valid == 1)
{
LCD_printfxy(0,1,"GPX: %4i (%3ims) ",Logged_GPX_Counter,LogCfg.GPX_Interval);
LCD_printfxy(0,2,"KML: %4i (%3ims) ",Logged_KML_Counter,LogCfg.KML_Interval);
LCD_printfxy(0,3,"Trig:%4i ",Logged_TRIG_Counter);
}
else
LCD_printfxy(0,1,"no card in slot ");
break;
case 19: // magnetic field
if(Compass_CalState)
{
LCD_printfxy(0,0,"Calibration:");
LCD_printfxy(0,1,"Step %d/", Compass_CalState);
LCD_printfxy(0,2,"X %4i Y %4i Z %4i",MagVector.X,MagVector.Y,MagVector.Z);
LCD_printfxy(9,3,"(ESC)(NEXT)");
switch(Compass_CalState)
{
case 1:
case 3:
LCD_printfxy(7,1,"pause");
break;
 
case 2:
LCD_printfxy(7,1,"horizontal");
break;
 
case 4:
LCD_printfxy(7,1,"vertical");
break;
 
case 5:
LCD_printfxy(7,1,"data saved");
LCD_printfxy(8,3," (END) ");
break;
 
default:
break;
}
}
else
{
if(GeoMagDec < 0) sign = '-';
else sign = '+';
LCD_printfxy(0,0,"Magnetic Field");
LCD_printfxy(0,1,"X:%5i",MagVector.X);
LCD_printfxy(0,2,"Y:%5i",MagVector.Y);
LCD_printfxy(0,3,"Z:%5i",MagVector.Z);
LCD_printfxy(8,1,"Field:%3i",EarthMagneticField/5);
if(Compass_I2CPort == NCMAG_PORT_EXTERN) LCD_printfxy(11,2,"Extern")
else LCD_printfxy(11,2,"Intern");
// LCD_printfxy(8,2,"Dec:%c%i.%1i", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
// LCD_printfxy(8,3,"Inc:%2i", EarthMagneticInclination);
LCD_printfxy(15,3,"(CAL)");
}
if(Keys & KEY4) // next step
{
if(Compass_CalState <5) Compass_SetCalState(Compass_CalState+1);
else Compass_SetCalState(0);
}
if(Keys & KEY3)Compass_SetCalState(0); // cancel
break;
case 20:
if(GeoMagDec < 0) sign = '-';
else sign = '+';
LCD_printfxy(0,0,"Magnetic Field");
LCD_printfxy(0,1,"Field:%3i (Percent)",EarthMagneticField/5);
LCD_printfxy(0,2,"Declination:%c%i.%1i ", sign, abs(GeoMagDec)/10,abs(GeoMagDec)%10);
LCD_printfxy(0,3,"Inclination:%2i (%2i)", EarthMagneticInclination, EarthMagneticInclinationTheoretic);
break;
case 21:
LCD_printfxy(0,0,"SD-Setting ");
LCD_printfxy(0,2,"WP-Dynamic:%4i ",WaypointAcceleration);
break;
case 22:
LCD_printfxy(0,0,"CPU Processing ");
LCD_printfxy(0,2,"GPS-Data: %2i.%iHz ",FreqNewGpsData/10, FreqNewGpsData%10);
LCD_printfxy(0,3,"GPS-Update:%2i.%iHz ",FreqGpsNavProcessed/10, FreqGpsNavProcessed%10);
if(FreqNewGpsData >= 48 && FreqNewGpsData <= 52) LCD_printfxy(18,2,"OK") else LCD_printfxy(18,2,"!!");
if(FreqGpsNavProcessed >= 350) LCD_printfxy(18,3,"OK") else LCD_printfxy(18,3,"!!");
break;
case 23:
LCD_printfxy(0,0,"BL Current" );
LCD_printfxy(11,3,"(in 0.1A)" );
for(i1 = 0; i1 < 3; i1++)
{
LCD_printfxy(0,i1+1,"%3d %3d %3d %3d ",BL3_Current(i1*4),BL3_Current(i1*4+1),BL3_Current(i1*4+2),BL3_Current(i1*4+3));
if(Motor[4 + i1 * 4].State == 0) break;
}
break;
 
case 24:
LCD_printfxy(0,0,"Ext. Compass" );
if(NCMAG_Compass_use_Orientation)
{
u8 tmp;
LCD_printfxy(0,1,"ACC X Y Z");
LCD_printfxy(0,2," %5d %5d %5d", AccVector.X/40, AccVector.Y/40, AccVector.Z/40);
tmp = NCMAG_GetOrientationFromAcc();
LCD_printfxy(0,3,"Orientat.: ");
if(!tmp) LCD_printfxy(11,3,"??") else LCD_printfxy(11,3,"%2d",tmp);
LCD_printfxy(15,3,"(%d)",NCMAG_Orientation);
}
else
{
LCD_printfxy(0,1,"Not connected");
}
break;
case 25:
{
static u8 index = 1;
if(Keys & KEY3) // next step
{
if(index < ToFC_MaxWpListIndex) index++;
else index = 1;
}
if(Keys & KEY4) FromFC_LoadWP_List = index;
LCD_printfxy(0,0,"Load WPL (fix)" );
LCD_printfxy(0,1,"Name: %s", WPL_Store.Name);
// 12345678901234567890
LCD_printfxy(0,2,"Points Index ");
LCD_printfxy(0,3," %3d %3d LOAD", PointList_GetCount(), index);
}
break;
case 26:
{
static u8 index = 1;
if(Keys & KEY3)
{
if(index < ToFC_MaxWpListIndex) index++;
else index = 1;
}
LCD_printfxy(0,0,"Load WPL (Rel)" );
LCD_printfxy(0,1,"Name: %s", WPL_Store.Name);
// 12345678901234567890
LCD_printfxy(0,2,"Points Index ");
if(GPSData.SatFix == SATFIX_3D)
{
LCD_printfxy(0,3," %3d %3d LOAD", PointList_GetCount(), index);
if(Keys & KEY4) FromFC_LoadWP_List = index | 0x80;
}
else LCD_printfxy(0,3," No Satfix ! ", index);
 
}
break;
case 27:
{
static u8 index = 1;
if(Keys & KEY3)
{
if(index < ToFC_MaxWpListIndex) index++;
else index = 1;
}
if(Keys & KEY4) FromFC_Load_SinglePoint = index;
LCD_printfxy(0,0,"Load Point" );
LCD_printfxy(0,1,"Name: %s", WPL_Store.Name);
// 12345678901234567890
// LCD_printfxy(0,2,"Points Index ");
LCD_printfxy(0,3,"Number: %3d (LOAD)", index);
}
break;
case 28:
{
static u8 index = 1;
if(Keys & KEY3)
{
if(index < ToFC_MaxWpListIndex) index++;
else index = 1;
}
LCD_printfxy(0,0,"Save Point" );
LCD_printfxy(0,1,"Alt: %3dm", NaviData.Altimeter_5cm/20);
// 12345678901234567890
LCD_printfxy(0,2,"Dir: %3d ", CompassSetpointCorrected/10);
if(GPSData.SatFix == SATFIX_3D)
{
LCD_printfxy(0,3,"Number: %3d (SAVE)", index);
if(Keys & KEY4) FromFC_Save_SinglePoint = index;
}
else LCD_printfxy(0,3," No Satfix ! ", index);
}
break;
/* case 28:
LCD_printfxy(0,0,"Analog inputs");
LCD_printfxy(0,0,"A0:%3i A1:%3i",AnalogData.Ch0,AnalogData.Ch1);
LCD_printfxy(0,1,"A2:%3i A3:%3i",AnalogData.Ch2,AnalogData.Ch3);
LCD_printfxy(0,2,"A4:%3i A5:%3i",AnalogData.Ch4,AnalogData.Ch5);
LCD_printfxy(0,3,"A6:%3i A7:%3i",AnalogData.Ch6,AnalogData.Ch7);
break;
*/
 
case 29:
LCD_printfxy(0,0,"Trigger Input");
if(UART_VersionInfo.HWMajor >= 30)
{
if(BlitzSchuhConnected) LCD_printfxy(0,1,"External")
else LCD_printfxy(0,1,"Internal");
LCD_printfxy(0,2,"Counter:%4d ",TrigLogging.Count);
LCD_printfxy(0,3,"Logfile:%4i ",Logged_TRIG_Counter);
}
else
{
LCD_printfxy(0,1,"Not Supported in ");
LCD_printfxy(0,2,"Hardware V%d ", UART_VersionInfo.HWMajor/10);
LCD_printfxy(0,3,"(V3 required)");
}
break;
case 30:
LCD_printfxy(0,0,"CamCtrl");
if(!(FromCamCtrl.CamStatus & CAM_STATE_I2C_OK))
{
LCD_printfxy(0,2,"Not connected");
if(CamCtrlTimeout < 10) LCD_printfxy(14,3,"(conn)"); // connect manually
if(Keys & KEY4) CamCtrlTimeout = 65000;
}
else
{
LCD_printfxy(8,0,"V%i.%02i",1 + FromCamCtrl.Version / 100, FromCamCtrl.Version % 100);
 
switch(FromCamCtrl.Type)
{
case TYPE_LANC: LCD_printfxy(13,0,"L"); break;
case TYPE_IR: LCD_printfxy(13,0,"I"); break;
case TYPE_MULTI: LCD_printfxy(13,0,"M"); break;
}
LCD_printfxy(0,0,"CamCtrl");
LCD_printfxy(0,1,"Stat:");
if(FromCamCtrl.CamStatus & CAM_STATE_RDY) LCD_printfxy(5,1,"RDY")
if(FromCamCtrl.CamStatus & CAM_STATE_REC_ACTIVE) LCD_printfxy(10,1,"REC");
if(FromCamCtrl.CamStatus & CAM_STATE_PHOTO_MODE) LCD_printfxy(14,1,"PHOTO");
if(FromCamCtrl.CamStatus & CAM_STATE_ZOOM) LCD_printfxy(5,1,"ZOOM ");
if(!(FromCamCtrl.CamStatus & CAM_STATE_RDY)) LCD_printfxy(5,1," ---");
 
LCD_printfxy(17,1,"(%c)",CamCtrlCharacter);
 
if(FromCamCtrl.CamStatus & CAM_STATE_CAM_DISCONN) LCD_printfxy(0,2,"Disconn.")
else
{
if(FromCamCtrl.CamStatus & CAM_STATE_OFF) LCD_printfxy(1,2,"Cam:OFF") else LCD_printfxy(1,2,"Cam:ON");
}
LCD_printfxy(11,2,"Pics:%3d ",FromCamCtrl.PhotoCount);
//LCD_printfxy(5,2,"x%2x ",FromCamCtrl.CamStatus);
if(FromCamCtrl.PPM1Okay) LCD_printfxy(0,3,"Zoom:%3i",FromCamCtrl.PPM1Data);
if(!FromCamCtrl.PPM2Okay) // there is PPM Input connected to the CamCtrl
{
LCD_printfxy(14,3,"(TRIG)");
if(EE_Parameter.CamCtrlModeChannel == 0)
{
if(FromCamCtrl.CamStatus & CAM_STATE_REC_ACTIVE) LCD_printfxy(9,3,"(off)")
else LCD_printfxy(9,3,"(REC)"); // Control only possible if no switch is assigned
}
else LCD_printfxy(2,3,"CH:%3i",127+PPM_In[EE_Parameter.CamCtrlModeChannel]);
 
if(Keys & KEY3)
{
ToCamCtrl.CamCommand &= ~(CAM_CMD_REC_OFF|CAM_CMD_REC_ON);
if(FromCamCtrl.CamStatus & CAM_STATE_REC_ACTIVE) ToCamCtrl.CamCommand |= CAM_CMD_REC_OFF;
else ToCamCtrl.CamCommand |= CAM_CMD_REC_ON;
}
if(Keys & KEY4) ToCamCtrl.CamCommand |= CAM_CMD_SHUTTER;
//if(Keys & KEY4) ToCamCtrl.CamCommand |= CAM_CMD_RESET_CAM;
//if(Keys & KEY4) ToCamCtrl.CamCommand |= CAM_CMD_SWITCH_ON;
//if(Keys & KEY4) ToCamCtrl.CamCommand |= CAM_CMD_SWITCH_OFF;
}
else
{
if(FromCamCtrl.PPM2Okay) LCD_printfxy(10,3,"PPM:%3i",FromCamCtrl.PPM2Data);
}
}
break;
 
default:
//MaxMenuItem = MenuItem - 1;
MenuItem = 0;
break;
}
}