| 0,0 → 1,106 |
|---|
| /*####################################################################################### |
| Flight Control |
| #######################################################################################*/ |
| |
| #ifndef _FC_H |
| #define _FC_H |
| |
| extern volatile unsigned char Timeout; |
| extern unsigned char Sekunde,Minute; |
| extern volatile long IntegralNick,IntegralNick2; |
| extern volatile long IntegralRoll,IntegralRoll2; |
| extern volatile long Mess_IntegralNick,Mess_IntegralNick2; |
| extern volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
| extern volatile long Mess_Integral_Hoch; |
| extern volatile long Integral_Gier,Mess_Integral_Gier,Mess_Integral_Gier2; |
| extern volatile int KompassValue; |
| extern volatile int KompassStartwert; |
| extern volatile int KompassRichtung; |
| extern int HoehenWert; |
| extern int SollHoehe; |
| extern volatile int MesswertNick,MesswertRoll,MesswertGier; |
| extern volatile int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll; |
| extern volatile int NeutralAccX, NeutralAccY,Mittelwert_AccHoch; |
| extern volatile float NeutralAccZ; |
| |
| |
| void MotorRegler(void); |
| void SendMotorData(void); |
| void CalibrierMittelwert(void); |
| void Mittelwert(void); |
| void SetNeutral(void); |
| |
| unsigned char h,m,s; |
| volatile unsigned char Timeout ; |
| unsigned char CosinusNickWinkel, CosinusRollWinkel; |
| volatile long IntegralNick,IntegralNick2; |
| volatile long IntegralRoll,IntegralRoll2; |
| volatile long Integral_Gier; |
| volatile long Mess_IntegralNick,Mess_IntegralNick2; |
| volatile long Mess_IntegralRoll,Mess_IntegralRoll2; |
| volatile long Mess_Integral_Gier; |
| volatile int DiffNick,DiffRoll; |
| extern int Poti1, Poti2, Poti3, Poti4; |
| volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count; |
| unsigned char MotorWert[5]; |
| volatile unsigned char SenderOkay; |
| int StickNick,StickRoll,StickGier; |
| char MotorenEin; |
| extern void DefaultKonstanten(void); |
| |
| #define STRUCT_PARAM_LAENGE 58 |
| struct mk_param_struct |
| { |
| unsigned char Kanalbelegung[8]; // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3 |
| unsigned char GlobalConfig; // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv |
| unsigned char Hoehe_MinGas; // Wert : 0-100 |
| unsigned char Luftdruck_D; // Wert : 0-250 |
| unsigned char MaxHoehe; // Wert : 0-32 |
| unsigned char Hoehe_P; // Wert : 0-32 |
| unsigned char Hoehe_Verstaerkung; // Wert : 0-50 |
| unsigned char Hoehe_ACC_Wirkung; // Wert : 0-250 |
| unsigned char Stick_P; // Wert : 1-6 |
| unsigned char Stick_D; // Wert : 0-64 |
| unsigned char Gier_P; // Wert : 1-20 |
| unsigned char Gas_Min; // Wert : 0-32 |
| unsigned char Gas_Max; // Wert : 33-250 |
| unsigned char GyroAccFaktor; // Wert : 1-64 |
| unsigned char KompassWirkung; // Wert : 0-32 |
| unsigned char Gyro_P; // Wert : 10-250 |
| unsigned char Gyro_I; // Wert : 0-250 |
| unsigned char UnterspannungsWarnung; // Wert : 0-250 |
| unsigned char NotGas; // Wert : 0-250 //Gaswert bei Empängsverlust |
| unsigned char NotGasZeit; // Wert : 0-250 // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen |
| unsigned char UfoAusrichtung; // X oder + Formation |
| unsigned char I_Faktor; // Wert : 0-250 |
| unsigned char UserParam1; // Wert : 0-250 |
| unsigned char UserParam2; // Wert : 0-250 |
| unsigned char UserParam3; // Wert : 0-250 |
| unsigned char UserParam4; // Wert : 0-250 |
| unsigned char ServoNickControl; // Wert : 0-250 // Stellung des Servos |
| unsigned char ServoNickComp; // Wert : 0-250 // Einfluss Gyro/Servo |
| unsigned char ServoNickMin; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickMax; // Wert : 0-250 // Anschlag |
| unsigned char ServoNickRefresh; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
| unsigned char ServoNickCompInvert; // Wert : 0-250 // Richtung Einfluss Gyro/Servo |
| unsigned char Reserved[7]; |
| char Name[12]; |
| }; |
| |
| |
| |
| |
| extern struct mk_param_struct EE_Parameter; |
| |
| extern unsigned char Parameter_Luftdruck_D; |
| extern unsigned char Parameter_MaxHoehe; |
| extern unsigned char Parameter_Hoehe_P; |
| extern unsigned char Parameter_Hoehe_ACC_Wirkung; |
| extern unsigned char Parameter_KompassWirkung; |
| extern unsigned char Parameter_Gyro_P; |
| extern unsigned char Parameter_Gyro_I; |
| extern unsigned char Parameter_Gier_P; |
| extern unsigned char Parameter_ServoNickControl; |
| |
| #endif //_FC_H |
| |