Rev 206 | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1 | ingob | 1 | /*#######################################################################################*/ |
| 2 | /* !!! THIS IS NOT FREE SOFTWARE !!! */ |
||
| 3 | /*#######################################################################################*/ |
||
| 4 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 5 | // + Copyright (c) 2008 Ingo Busker, Holger Buss |
||
| 171 | ingob | 6 | // + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
| 1 | ingob | 7 | // + FOR NON COMMERCIAL USE ONLY |
| 8 | // + www.MikroKopter.com |
||
| 9 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 41 | ingob | 10 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
| 11 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
| 12 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
| 13 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
| 1 | ingob | 14 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
| 15 | // + Verkauf von Luftbildaufnahmen, usw. |
||
| 16 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 41 | ingob | 17 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
| 1 | ingob | 18 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
| 19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 20 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
| 21 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
| 22 | // + eindeutig als Ursprung verlinkt werden |
||
| 23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 24 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
| 25 | // + Benutzung auf eigene Gefahr |
||
| 26 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
| 27 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 171 | ingob | 28 | // + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
| 1 | ingob | 29 | // + mit unserer Zustimmung zulässig |
| 30 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 31 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
| 32 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 41 | ingob | 33 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
| 1 | ingob | 34 | // + this list of conditions and the following disclaimer. |
| 35 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
| 36 | // + from this software without specific prior written permission. |
||
| 41 | ingob | 37 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permitted |
| 1 | ingob | 38 | // + for non-commercial use (directly or indirectly) |
| 41 | ingob | 39 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
| 1 | ingob | 40 | // + with our written permission |
| 41 | ingob | 41 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
| 42 | // + clearly linked as origin |
||
| 171 | ingob | 43 | // + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
| 1 | ingob | 44 | // |
| 45 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
| 46 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
| 47 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
| 48 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
| 49 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
| 50 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
| 51 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
| 52 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
| 53 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
| 54 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
| 41 | ingob | 55 | // + POSSIBILITY OF SUCH DAMAGE. |
| 1 | ingob | 56 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 41 | ingob | 57 | |
| 58 | #include <string.h> |
||
| 59 | #include "91x_lib.h" |
||
| 60 | #include "led.h" |
||
| 61 | #include "GPS.h" |
||
| 62 | #include "uart1.h" |
||
| 63 | #include "spi_slave.h" |
||
| 64 | #include "i2c.h" |
||
| 119 | killagreg | 65 | #include "timer1.h" |
| 66 | #include "timer2.h" |
||
| 136 | killagreg | 67 | #include "config.h" |
| 1 | ingob | 68 | #include "main.h" |
| 41 | ingob | 69 | #include "fifo.h" |
| 1 | ingob | 70 | |
| 71 | |||
| 41 | ingob | 72 | #define SPI_RXSYNCBYTE1 0xAA |
| 73 | #define SPI_RXSYNCBYTE2 0x83 |
||
| 74 | #define SPI_TXSYNCBYTE1 0x81 |
||
| 75 | #define SPI_TXSYNCBYTE2 0x55 |
||
| 1 | ingob | 76 | |
| 41 | ingob | 77 | //communication packets |
| 78 | volatile FromFlightCtrl_t FromFlightCtrl; |
||
| 79 | volatile ToFlightCtrl_t ToFlightCtrl; |
||
| 183 | killagreg | 80 | #define SPI0_TIMEOUT 500 // 500ms |
| 146 | killagreg | 81 | volatile u32 SPI0_Timeout = 0; |
| 1 | ingob | 82 | |
| 41 | ingob | 83 | // tx packet buffer |
| 84 | #define SPI_TXBUFFER_LEN (2 + sizeof(ToFlightCtrl)) // 2 bytes at start are for synchronization |
||
| 85 | volatile u8 SPI_TxBuffer[SPI_TXBUFFER_LEN]; |
||
| 86 | volatile u8 SPI_TxBufferIndex = 0; |
||
| 87 | u8 *Ptr_TxChksum = NULL ; // pointer to checksum in TxBuffer |
||
| 1 | ingob | 88 | |
| 41 | ingob | 89 | // rx packet buffer |
| 90 | #define SPI_RXBUFFER_LEN sizeof(FromFlightCtrl) |
||
| 91 | volatile u8 SPI_RxBuffer[SPI_RXBUFFER_LEN]; |
||
| 92 | volatile u8 SPI_RxBufferIndex = 0; |
||
| 93 | volatile u8 SPI_RxBuffer_Request = 0; |
||
| 1 | ingob | 94 | #define SPI_COMMAND_INDEX 0 |
| 95 | |||
| 149 | killagreg | 96 | s32 Kalman_K = 32; |
| 41 | ingob | 97 | s32 Kalman_MaxDrift = 5 * 16; |
| 98 | s32 Kalman_MaxFusion = 64; |
||
| 148 | holgerb | 99 | s32 ToFcGpsZ = 0; |
| 1 | ingob | 100 | |
| 204 | killagreg | 101 | u8 SPI_CommandSequence[] = { SPI_NCCMD_VERSION, SPI_NCCMD_KALMAN, SPI_NCCMD_GPSINFO ,SPI_NCCMD_KALMAN, SPI_NCCMD_KALMAN}; |
| 41 | ingob | 102 | u8 SPI_CommandCounter = 0; |
| 58 | killagreg | 103 | |
| 41 | ingob | 104 | SPI_Version_t FC_Version; |
| 1 | ingob | 105 | |
| 41 | ingob | 106 | u8 CompassCalStateQueue[10]; |
| 107 | fifo_t CompassCalcStateFiFo; |
||
| 1 | ingob | 108 | |
| 41 | ingob | 109 | u8 CompassCalState = 0; |
| 1 | ingob | 110 | |
| 41 | ingob | 111 | //-------------------------------------------------------------- |
| 112 | void SSP0_IRQHandler(void) |
||
| 113 | { |
||
| 114 | static u8 rxchksum = 0; |
||
| 115 | u8 rxdata; |
||
| 1 | ingob | 116 | |
| 189 | killagreg | 117 | #define SPI_SYNC1 0 |
| 118 | #define SPI_SYNC2 1 |
||
| 119 | #define SPI_DATA 2 |
||
| 120 | static u8 SPI_State = SPI_SYNC1; |
||
| 121 | |||
| 195 | killagreg | 122 | IENABLE; |
| 123 | |||
| 161 | killagreg | 124 | // clear pending bits |
| 41 | ingob | 125 | SSP_ClearITPendingBit(SSP0, SSP_IT_RxTimeOut); |
| 144 | killagreg | 126 | SSP_ClearITPendingBit(SSP0, SSP_IT_RxFifo); |
| 189 | killagreg | 127 | |
| 79 | killagreg | 128 | // while RxFIFO not empty |
| 129 | while (SSP_GetFlagStatus(SSP0, SSP_FLAG_RxFifoNotEmpty) == SET) |
||
| 130 | { |
||
| 41 | ingob | 131 | rxdata = SSP0->DR; // catch the received byte |
| 132 | // Fill TxFIFO while its not full or end of packet is reached |
||
| 79 | killagreg | 133 | while (SSP_GetFlagStatus(SSP0, SSP_FLAG_TxFifoNotFull) == SET) |
| 161 | killagreg | 134 | { |
| 79 | killagreg | 135 | if (SPI_TxBufferIndex < SPI_TXBUFFER_LEN) // still data to send ? |
| 136 | { |
||
| 41 | ingob | 137 | SSP0->DR = SPI_TxBuffer[SPI_TxBufferIndex]; // send a byte |
| 79 | killagreg | 138 | *Ptr_TxChksum += SPI_TxBuffer[SPI_TxBufferIndex]; // update checksum |
| 139 | SPI_TxBufferIndex++; // pointer to next byte |
||
| 140 | } |
||
| 141 | else // end of packet is reached reset and copy data to tx buffer |
||
| 142 | { |
||
| 143 | SPI_TxBufferIndex = 0; // reset buffer index |
||
| 144 | ToFlightCtrl.Chksum = 0; // initialize checksum |
||
| 145 | ToFlightCtrl.BeepTime = BeepTime; // set beeptime |
||
| 146 | BeepTime = 0; // reset local beeptime |
||
| 41 | ingob | 147 | // copy contents of ToFlightCtrl->SPI_TxBuffer |
| 79 | killagreg | 148 | memcpy((u8 *) &(SPI_TxBuffer[2]), (u8 *) &ToFlightCtrl, sizeof(ToFlightCtrl)); |
| 149 | } |
||
| 41 | ingob | 150 | } |
| 151 | switch (SPI_State) |
||
| 152 | { |
||
| 153 | case SPI_SYNC1: |
||
| 154 | SPI_RxBufferIndex = 0; // reset buffer index |
||
| 155 | rxchksum = rxdata; // init checksum |
||
| 156 | if (rxdata == SPI_RXSYNCBYTE1) |
||
| 157 | { // 1st syncbyte ok |
||
| 158 | SPI_State = SPI_SYNC2; // step to sync2 |
||
| 159 | } |
||
| 160 | break; |
||
| 79 | killagreg | 161 | case SPI_SYNC2: |
| 41 | ingob | 162 | if (rxdata == SPI_RXSYNCBYTE2) |
| 163 | { // 2nd Syncbyte ok |
||
| 164 | rxchksum += rxdata; |
||
| 165 | SPI_State = SPI_DATA; |
||
| 166 | } // 2nd Syncbyte does not match |
||
| 167 | else |
||
| 168 | { |
||
| 169 | SPI_State = SPI_SYNC1; //jump back to sync1 |
||
| 170 | } |
||
| 171 | break; |
||
| 172 | case SPI_DATA: |
||
| 173 | SPI_RxBuffer[SPI_RxBufferIndex++]= rxdata; // copy databyte to rx buffer |
||
| 174 | if (SPI_RxBufferIndex >= SPI_RXBUFFER_LEN) // end of packet is reached |
||
| 175 | { |
||
| 176 | if (rxdata == rxchksum) // verify checksum byte |
||
| 177 | { |
||
| 178 | // copy SPI_RxBuffer -> FromFlightCtrl |
||
| 179 | if(!SPI_RxBuffer_Request) // block writing to FromFlightCtrl on reading access |
||
| 180 | { |
||
| 181 | memcpy((u8 *) &FromFlightCtrl, (u8 *) SPI_RxBuffer, sizeof(FromFlightCtrl)); |
||
| 182 | SPI_RxBuffer_Request = 1; |
||
| 183 | } |
||
| 146 | killagreg | 184 | // reset timeout counter on good packet |
| 185 | SPI0_Timeout = SetDelay(SPI0_TIMEOUT); |
||
| 41 | ingob | 186 | DebugOut.Analog[13]++; |
| 187 | } |
||
| 188 | else // bad checksum byte |
||
| 189 | { |
||
| 190 | DebugOut.Analog[12]++; // increase SPI chksum error counter |
||
| 191 | } |
||
| 192 | SPI_State = SPI_SYNC1; // reset state |
||
| 193 | } |
||
| 194 | else // end of packet not reached |
||
| 195 | { |
||
| 196 | rxchksum += rxdata; // update checksum |
||
| 197 | } |
||
| 198 | break; |
||
| 199 | default: |
||
| 200 | SPI_State = SPI_SYNC1; |
||
| 201 | break; |
||
| 202 | } |
||
| 203 | } |
||
| 195 | killagreg | 204 | |
| 205 | IDISABLE; |
||
| 1 | ingob | 206 | } |
| 207 | |||
| 208 | //-------------------------------------------------------------- |
||
| 209 | void SPI0_Init(void) |
||
| 210 | { |
||
| 41 | ingob | 211 | GPIO_InitTypeDef GPIO_InitStructure; |
| 212 | SSP_InitTypeDef SSP_InitStructure; |
||
| 1 | ingob | 213 | |
| 110 | killagreg | 214 | UART1_PutString("\r\n SPI init..."); |
| 1 | ingob | 215 | |
| 41 | ingob | 216 | SCU_APBPeriphClockConfig(__GPIO2 ,ENABLE); |
| 217 | SCU_APBPeriphClockConfig(__SSP0 ,ENABLE); |
||
| 1 | ingob | 218 | |
| 41 | ingob | 219 | GPIO_DeInit(GPIO2); |
| 220 | //SSP0_CLK, SSP0_MOSI, SSP0_NSS pins |
||
| 221 | GPIO_StructInit(&GPIO_InitStructure); |
||
| 222 | GPIO_InitStructure.GPIO_Direction = GPIO_PinInput; |
||
| 223 | GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_7; |
||
| 224 | GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ; |
||
| 196 | killagreg | 225 | GPIO_InitStructure.GPIO_IPInputConnected = GPIO_IPInputConnected_Enable; |
| 41 | ingob | 226 | GPIO_InitStructure.GPIO_Alternate = GPIO_InputAlt1; //SSP0_SCLK, SSP0_MOSI, SSP0_NSS |
| 227 | GPIO_Init (GPIO2, &GPIO_InitStructure); |
||
| 1 | ingob | 228 | |
| 41 | ingob | 229 | // SSP0_MISO pin GPIO2.6 |
| 230 | GPIO_StructInit(&GPIO_InitStructure); |
||
| 231 | GPIO_InitStructure.GPIO_Direction = GPIO_PinOutput; |
||
| 232 | GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; |
||
| 233 | GPIO_InitStructure.GPIO_Type = GPIO_Type_PushPull ; |
||
| 196 | killagreg | 234 | GPIO_InitStructure.GPIO_IPInputConnected = GPIO_IPInputConnected_Enable; |
| 41 | ingob | 235 | GPIO_InitStructure.GPIO_Alternate = GPIO_OutputAlt2; //SSP0_MISO |
| 236 | GPIO_Init (GPIO2, &GPIO_InitStructure); |
||
| 1 | ingob | 237 | |
| 41 | ingob | 238 | SSP_DeInit(SSP0); |
| 239 | SSP_StructInit(&SSP_InitStructure); |
||
| 240 | SSP_InitStructure.SSP_FrameFormat = SSP_FrameFormat_Motorola; |
||
| 241 | SSP_InitStructure.SSP_Mode = SSP_Mode_Slave; |
||
| 242 | SSP_InitStructure.SSP_SlaveOutput = SSP_SlaveOutput_Enable; |
||
| 243 | SSP_InitStructure.SSP_CPHA = SSP_CPHA_1Edge; |
||
| 244 | SSP_InitStructure.SSP_CPOL = SSP_CPOL_Low; |
||
| 245 | SSP_InitStructure.SSP_ClockRate = 0; |
||
| 1 | ingob | 246 | |
| 41 | ingob | 247 | SSP_Init(SSP0, &SSP_InitStructure); |
| 144 | killagreg | 248 | SSP_ITConfig(SSP0, SSP_IT_RxFifo | SSP_IT_RxTimeOut, ENABLE); |
| 202 | killagreg | 249 | |
| 41 | ingob | 250 | fifo_init(&CompassCalcStateFiFo, CompassCalStateQueue, sizeof(CompassCalStateQueue)); |
| 251 | |||
| 252 | SSP_Cmd(SSP0, ENABLE); |
||
| 253 | // initialize the syncbytes in the tx buffer |
||
| 254 | SPI_TxBuffer[0] = SPI_TXSYNCBYTE1; |
||
| 255 | SPI_TxBuffer[1] = SPI_TXSYNCBYTE2; |
||
| 256 | // set the pointer to the checksum byte in the tx buffer |
||
| 257 | Ptr_TxChksum = (u8 *) &(((ToFlightCtrl_t *) &(SPI_TxBuffer[2]))->Chksum); |
||
| 258 | |||
| 136 | killagreg | 259 | VIC_Config(SSP0_ITLine, VIC_IRQ, PRIORITY_SPI0); |
| 41 | ingob | 260 | VIC_ITCmd(SSP0_ITLine, ENABLE); |
| 261 | |||
| 146 | killagreg | 262 | SPI0_Timeout = SetDelay(4*SPI0_TIMEOUT); |
| 263 | |||
| 110 | killagreg | 264 | UART1_PutString("ok"); |
| 1 | ingob | 265 | } |
| 41 | ingob | 266 | |
| 1 | ingob | 267 | //------------------------------------------------------ |
| 41 | ingob | 268 | void SPI0_UpdateBuffer(void) |
| 1 | ingob | 269 | { |
| 180 | killagreg | 270 | static u32 timeout = 0; |
| 271 | static u8 counter = 50; |
||
| 202 | killagreg | 272 | |
| 41 | ingob | 273 | if (SPI_RxBuffer_Request) |
| 274 | { |
||
| 275 | // avoid sending data via SPI during the update of the ToFlightCtrl structure |
||
| 276 | VIC_ITCmd(SSP0_ITLine, DISABLE); // disable SPI interrupt |
||
| 277 | ToFlightCtrl.CompassHeading = I2C_Heading.Heading; |
||
| 189 | killagreg | 278 | DebugOut.Analog[10] = ToFlightCtrl.CompassHeading; |
| 41 | ingob | 279 | ToFlightCtrl.GPS_Nick = GPS_Stick.Nick; |
| 280 | ToFlightCtrl.GPS_Roll = GPS_Stick.Roll; |
||
| 281 | ToFlightCtrl.GPS_Yaw = GPS_Stick.Yaw; |
||
| 282 | // cycle spi commands |
||
| 283 | ToFlightCtrl.Command = SPI_CommandSequence[SPI_CommandCounter++]; |
||
| 118 | killagreg | 284 | // restart command cycle at the end |
| 41 | ingob | 285 | if (SPI_CommandCounter >= sizeof(SPI_CommandSequence)) SPI_CommandCounter = 0; |
| 1 | ingob | 286 | |
| 41 | ingob | 287 | switch (ToFlightCtrl.Command) |
| 288 | { |
||
| 202 | killagreg | 289 | case SPI_NCCMD_KALMAN: |
| 149 | killagreg | 290 | ToFlightCtrl.Param.sByte[0] = (s8) Kalman_K; |
| 92 | killagreg | 291 | ToFlightCtrl.Param.sByte[1] = (s8) Kalman_MaxFusion; |
| 292 | ToFlightCtrl.Param.sByte[2] = (s8) Kalman_MaxDrift; |
||
| 118 | killagreg | 293 | ToFlightCtrl.Param.Byte[3] = (u8) SerialLinkOkay; |
| 149 | killagreg | 294 | ToFlightCtrl.Param.sByte[4] = (s8) ToFcGpsZ; |
| 161 | killagreg | 295 | break; |
| 58 | killagreg | 296 | |
| 202 | killagreg | 297 | case SPI_NCCMD_VERSION: |
| 298 | ToFlightCtrl.Param.Byte[0] = VERSION_MAJOR; |
||
| 299 | ToFlightCtrl.Param.Byte[1] = VERSION_MINOR; |
||
| 204 | killagreg | 300 | ToFlightCtrl.Param.Byte[2] = VERSION_PATCH; |
| 202 | killagreg | 301 | ToFlightCtrl.Param.Byte[3] = FC_SPI_COMPATIBLE; |
| 302 | ToFlightCtrl.Param.Byte[4] = 0; |
||
| 303 | break; |
||
| 204 | killagreg | 304 | |
| 305 | case SPI_NCCMD_GPSINFO: |
||
| 306 | ToFlightCtrl.Param.Byte[0] = GPSData.Flags; |
||
| 307 | ToFlightCtrl.Param.Byte[1] = GPSData.NumOfSats; |
||
| 308 | ToFlightCtrl.Param.Byte[2] = GPSData.SatFix; |
||
| 205 | killagreg | 309 | ToFlightCtrl.Param.Int[2] = NaviData.HomePositionDeviation.Distance; // dm |
| 310 | ToFlightCtrl.Param.sInt[3] = NaviData.HomePositionDeviation.Bearing; // deg |
||
| 204 | killagreg | 311 | break; |
| 202 | killagreg | 312 | |
| 41 | ingob | 313 | default: |
| 314 | break; |
||
| 315 | } |
||
| 316 | VIC_ITCmd(SSP0_ITLine, ENABLE); // enable SPI interrupt |
||
| 1 | ingob | 317 | |
| 318 | |||
| 41 | ingob | 319 | switch(FromFlightCtrl.Command) |
| 320 | { |
||
| 202 | killagreg | 321 | case SPI_FCCMD_USER: |
| 41 | ingob | 322 | Parameter.User1 = FromFlightCtrl.Param.Byte[0]; |
| 323 | Parameter.User2 = FromFlightCtrl.Param.Byte[1]; |
||
| 324 | Parameter.User3 = FromFlightCtrl.Param.Byte[2]; |
||
| 325 | Parameter.User4 = FromFlightCtrl.Param.Byte[3]; |
||
| 326 | Parameter.User5 = FromFlightCtrl.Param.Byte[4]; |
||
| 327 | Parameter.User6 = FromFlightCtrl.Param.Byte[5]; |
||
| 328 | Parameter.User7 = FromFlightCtrl.Param.Byte[6]; |
||
| 329 | Parameter.User8 = FromFlightCtrl.Param.Byte[7]; |
||
| 199 | killagreg | 330 | if(ClearFCFlags) |
| 41 | ingob | 331 | { |
| 199 | killagreg | 332 | FC.Flags = 0; |
| 333 | ClearFCFlags = 0; |
||
| 41 | ingob | 334 | } |
| 206 | killagreg | 335 | FC.Flags |= FromFlightCtrl.Param.Byte[8]; |
| 336 | Parameter.ActiveSetting = FromFlightCtrl.Param.Byte[9]; |
||
| 199 | killagreg | 337 | DebugOut.Analog[5] = FC.Flags; |
| 206 | killagreg | 338 | NaviData.FCFlags = FC.Flags; |
| 41 | ingob | 339 | break; |
| 1 | ingob | 340 | |
| 206 | killagreg | 341 | case SPI_FCCMD_ACCU: |
| 342 | FC.BAT_Current = FromFlightCtrl.Param.Int[0]; |
||
| 343 | FC.BAT_UsedCapacity = FromFlightCtrl.Param.Int[1]; |
||
| 344 | FC.BAT_Voltage = FromFlightCtrl.Param.Byte[4]; |
||
| 345 | Parameter.LowVoltageWarning = FromFlightCtrl.Param.Byte[5]; |
||
| 346 | NaviData.UBat = FC.BAT_Voltage; |
||
| 347 | NaviData.Current = FC.BAT_Current; |
||
| 348 | NaviData.UsedCapacity = FC.BAT_UsedCapacity; |
||
| 349 | break; |
||
| 350 | |||
| 193 | killagreg | 351 | #define CHK_POTI(b,a) { if(a < 248) b = a; else b = FC.Poti[255 - a]; } |
| 190 | killagreg | 352 | #define CHK_POTI_MM(b,a,min,max) {CHK_POTI(b,a); LIMIT_MIN_MAX(b, min, max); } |
| 353 | |||
| 202 | killagreg | 354 | case SPI_FCCMD_PARAMETER1: |
| 41 | ingob | 355 | CHK_POTI_MM(Parameter.NaviGpsModeControl,FromFlightCtrl.Param.Byte[0],0,255); |
| 356 | CHK_POTI_MM(Parameter.NaviGpsGain,FromFlightCtrl.Param.Byte[1],0,255); |
||
| 357 | CHK_POTI_MM(Parameter.NaviGpsP,FromFlightCtrl.Param.Byte[2],0,255); |
||
| 358 | CHK_POTI_MM(Parameter.NaviGpsI,FromFlightCtrl.Param.Byte[3],0,255); |
||
| 359 | CHK_POTI_MM(Parameter.NaviGpsD,FromFlightCtrl.Param.Byte[4],0,255); |
||
| 360 | CHK_POTI_MM(Parameter.NaviGpsACC,FromFlightCtrl.Param.Byte[5],0,255); |
||
| 361 | Parameter.NaviGpsMinSat = FromFlightCtrl.Param.Byte[6]; |
||
| 362 | Parameter.NaviStickThreshold = FromFlightCtrl.Param.Byte[7]; |
||
| 103 | killagreg | 363 | CHK_POTI_MM(Parameter.NaviOperatingRadius,FromFlightCtrl.Param.Byte[8],0,255); |
| 41 | ingob | 364 | CHK_POTI_MM(Parameter.NaviWindCorrection,FromFlightCtrl.Param.Byte[9],0,255); |
| 365 | CHK_POTI_MM(Parameter.NaviSpeedCompensation,FromFlightCtrl.Param.Byte[10],0,255); |
||
| 366 | CHK_POTI_MM(Parameter.NaviAngleLimitation,FromFlightCtrl.Param.Byte[11],0,255); |
||
| 121 | killagreg | 367 | break; |
| 1 | ingob | 368 | |
| 202 | killagreg | 369 | case SPI_FCCMD_STICK: |
| 41 | ingob | 370 | FC.StickGas = FromFlightCtrl.Param.sByte[0]; |
| 371 | FC.StickYaw = FromFlightCtrl.Param.sByte[1]; |
||
| 372 | FC.StickRoll = FromFlightCtrl.Param.sByte[2]; |
||
| 373 | FC.StickNick = FromFlightCtrl.Param.sByte[3]; |
||
| 190 | killagreg | 374 | FC.Poti[0] = FromFlightCtrl.Param.Byte[4]; |
| 375 | FC.Poti[1] = FromFlightCtrl.Param.Byte[5]; |
||
| 376 | FC.Poti[2] = FromFlightCtrl.Param.Byte[6]; |
||
| 377 | FC.Poti[3] = FromFlightCtrl.Param.Byte[7]; |
||
| 378 | FC.Poti[4] = FromFlightCtrl.Param.Byte[8]; |
||
| 379 | FC.Poti[5] = FromFlightCtrl.Param.Byte[9]; |
||
| 380 | FC.Poti[6] = FromFlightCtrl.Param.Byte[10]; |
||
| 202 | killagreg | 381 | FC.Poti[7] = FromFlightCtrl.Param.Byte[11]; |
| 41 | ingob | 382 | break; |
| 27 | holgerb | 383 | |
| 202 | killagreg | 384 | case SPI_FCCMD_MISC: |
| 41 | ingob | 385 | if(CompassCalState != FromFlightCtrl.Param.Byte[0]) |
| 386 | { // put only new CompassCalState into queue to send via I2C |
||
| 387 | CompassCalState = FromFlightCtrl.Param.Byte[0]; |
||
| 388 | fifo_put(&CompassCalcStateFiFo, CompassCalState); |
||
| 389 | } |
||
| 58 | killagreg | 390 | Parameter.NaviPH_LoginTime = FromFlightCtrl.Param.Byte[1]; |
| 205 | killagreg | 391 | NaviData.Variometer = (NaviData.Variometer + 2 * (FromFlightCtrl.Param.sInt[1] - NaviData.Altimeter)) / 2; // provisorisch |
| 392 | NaviData.Altimeter = FromFlightCtrl.Param.sInt[1]; // is located at byte 2 and 3 |
||
| 393 | NaviData.SetpointAltitude = FromFlightCtrl.Param.sInt[2]; // is located at byte 4 and 5 |
||
| 160 | holgerb | 394 | CHK_POTI_MM(Parameter.NaviGpsPLimit,FromFlightCtrl.Param.Byte[6],0,255); |
| 395 | CHK_POTI_MM(Parameter.NaviGpsILimit,FromFlightCtrl.Param.Byte[7],0,255); |
||
| 396 | CHK_POTI_MM(Parameter.NaviGpsDLimit,FromFlightCtrl.Param.Byte[8],0,255); |
||
| 190 | killagreg | 397 | FC.RC_Quality = FromFlightCtrl.Param.Byte[9]; |
| 398 | FC.RC_RSSI = FromFlightCtrl.Param.Byte[10]; |
||
| 206 | killagreg | 399 | NaviData.RC_Quality = FC.RC_Quality; |
| 400 | NaviData.RC_RSSI = FC.RC_RSSI; |
||
| 401 | NaviData.Gas = (FC.BAT_Voltage * (u32) FromFlightCtrl.Param.Byte[11]) / (u32) Parameter.LowVoltageWarning; |
||
| 41 | ingob | 402 | break; |
| 161 | killagreg | 403 | |
| 202 | killagreg | 404 | case SPI_FCCMD_SERVOS: |
| 121 | killagreg | 405 | ServoParams.Refresh = FromFlightCtrl.Param.Byte[0]; |
| 406 | ServoParams.CompInvert = FromFlightCtrl.Param.Byte[1]; |
||
| 407 | ServoParams.NickControl = FromFlightCtrl.Param.Byte[2]; |
||
| 408 | ServoParams.NickComp = FromFlightCtrl.Param.Byte[3]; |
||
| 161 | killagreg | 409 | ServoParams.NickMin = FromFlightCtrl.Param.Byte[4]; |
| 121 | killagreg | 410 | ServoParams.NickMax = FromFlightCtrl.Param.Byte[5]; |
| 411 | ServoParams.RollControl = FromFlightCtrl.Param.Byte[6]; |
||
| 412 | ServoParams.RollComp = FromFlightCtrl.Param.Byte[7]; |
||
| 161 | killagreg | 413 | ServoParams.RollMin = FromFlightCtrl.Param.Byte[8]; |
| 414 | ServoParams.RollMax = FromFlightCtrl.Param.Byte[9]; |
||
| 119 | killagreg | 415 | break; |
| 1 | ingob | 416 | |
| 202 | killagreg | 417 | case SPI_FCCMD_VERSION: |
| 119 | killagreg | 418 | FC_Version.Major = FromFlightCtrl.Param.Byte[0]; |
| 419 | FC_Version.Minor = FromFlightCtrl.Param.Byte[1]; |
||
| 420 | FC_Version.Patch = FromFlightCtrl.Param.Byte[2]; |
||
| 421 | FC_Version.Compatible = FromFlightCtrl.Param.Byte[3]; |
||
| 422 | FC_Version.Hardware = FromFlightCtrl.Param.Byte[4]; |
||
| 41 | ingob | 423 | break; |
| 1 | ingob | 424 | |
| 41 | ingob | 425 | default: |
| 204 | killagreg | 426 | break; |
| 41 | ingob | 427 | } |
| 1 | ingob | 428 | |
| 41 | ingob | 429 | // every time we got new data from the FC via SPI call the navigation routine |
| 430 | GPS_Navigation(); |
||
| 199 | killagreg | 431 | ClearFCFlags = 1; |
| 202 | killagreg | 432 | |
| 180 | killagreg | 433 | if(counter) |
| 434 | { |
||
| 435 | counter--; // count down to enable servo |
||
| 202 | killagreg | 436 | if(!counter) TIMER2_Init(); // enable Servo Output |
| 180 | killagreg | 437 | } |
| 1 | ingob | 438 | |
| 41 | ingob | 439 | SPI_RxBuffer_Request = 0; |
| 180 | killagreg | 440 | timeout = SetDelay(80); // 80 ms, new data are send every 20 ms |
| 1 | ingob | 441 | |
| 62 | killagreg | 442 | DebugOut.Analog[0] = FromFlightCtrl.AngleNick; |
| 443 | DebugOut.Analog[1] = FromFlightCtrl.AngleRoll; |
||
| 61 | holgerb | 444 | DebugOut.Analog[2] = FromFlightCtrl.AccNick; |
| 445 | DebugOut.Analog[3] = FromFlightCtrl.AccRoll; |
||
| 62 | killagreg | 446 | DebugOut.Analog[11] = FromFlightCtrl.GyroHeading/10;// in deg |
| 79 | killagreg | 447 | Data3D.AngleNick = FromFlightCtrl.AngleNick; // in 0.1 deg |
| 448 | Data3D.AngleRoll = FromFlightCtrl.AngleRoll; // in 0.1 deg |
||
| 449 | Data3D.Heading = FromFlightCtrl.GyroHeading; // in 0.1 deg |
||
| 450 | } // EOF if(SPI_RxBuffer_Request) |
||
| 180 | killagreg | 451 | else // no new SPI data |
| 202 | killagreg | 452 | { |
| 180 | killagreg | 453 | if(CheckDelay(timeout) && (counter == 0)) |
| 454 | { |
||
| 455 | TIMER2_Deinit(); // disable Servo Output |
||
| 456 | counter = 50; // reset counter for enabling Servo Output |
||
| 457 | } |
||
| 458 | } |
||
| 1 | ingob | 459 | } |
| 460 | |||
| 41 | ingob | 461 | //------------------------------------------------------ |
| 462 | void SPI0_GetFlightCtrlVersion(void) |
||
| 463 | { |
||
| 154 | killagreg | 464 | u32 timeout; |
| 465 | u8 repeat; |
||
| 78 | holgerb | 466 | u8 msg[64]; |
| 41 | ingob | 467 | |
| 154 | killagreg | 468 | UART1_PutString("\r\n Getting Version from FC"); |
| 41 | ingob | 469 | FC_Version.Major = 0xFF; |
| 470 | FC_Version.Minor = 0xFF; |
||
| 471 | FC_Version.Patch = 0xFF; |
||
| 472 | FC_Version.Compatible = 0xFF; |
||
| 473 | |||
| 165 | killagreg | 474 | // polling FC version info |
| 154 | killagreg | 475 | repeat = 0; |
| 41 | ingob | 476 | do |
| 477 | { |
||
| 154 | killagreg | 478 | timeout = SetDelay(250); |
| 479 | do |
||
| 480 | { |
||
| 481 | SPI0_UpdateBuffer(); |
||
| 482 | if (FC_Version.Major != 0xFF) break; |
||
| 483 | }while (!CheckDelay(timeout)); |
||
| 484 | UART1_PutString("."); |
||
| 485 | repeat++; |
||
| 180 | killagreg | 486 | }while((FC_Version.Major == 0xFF) && (repeat < 40)); // 40*250ms = 10s |
| 41 | ingob | 487 | // if we got it |
| 488 | if (FC_Version.Major != 0xFF) |
||
| 489 | { |
||
| 61 | holgerb | 490 | sprintf(msg, "\n\r FlightCtrl V%d.%d%c HW:%d.%d", FC_Version.Major, FC_Version.Minor, 'a'+FC_Version.Patch, FC_Version.Hardware/10,FC_Version.Hardware%10); |
| 110 | killagreg | 491 | UART1_PutString(msg); |
| 41 | ingob | 492 | sprintf(msg, " Compatible: %d", FC_Version.Compatible); |
| 110 | killagreg | 493 | UART1_PutString(msg); |
| 41 | ingob | 494 | } |
| 110 | killagreg | 495 | else UART1_PutString("\n\r No version information from FlightCtrl."); |
| 41 | ingob | 496 | } |
| 497 | |||
| 498 |