Rev 1501 | Rev 1523 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1 | ingob | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1338 | ingob | 2 | // + Copyright (c) Holger Buss, Ingo Busker |
| 1 | ingob | 3 | // + only for non-profit use |
| 4 | // + www.MikroKopter.com |
||
| 5 | // + see the File "License.txt" for further Informations |
||
| 6 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 1051 | killagreg | 7 | #include <stdarg.h> |
| 8 | #include <string.h> |
||
| 1490 | killagreg | 9 | #include <avr/pgmspace.h> |
| 1 | ingob | 10 | #include "main.h" |
| 11 | #include "uart.h" |
||
| 1438 | ingob | 12 | #include "libfc.h" |
| 1 | ingob | 13 | |
| 1054 | killagreg | 14 | |
| 15 | #define FC_ADDRESS 1 |
||
| 16 | #define NC_ADDRESS 2 |
||
| 17 | #define MK3MAG_ADDRESS 3 |
||
| 18 | |||
| 1415 | killagreg | 19 | #define ABO_TIMEOUT 4000 // disable abo after 4 seconds |
| 1441 | ingob | 20 | #define MAX_SENDE_BUFF 160 |
| 21 | #define MAX_EMPFANGS_BUFF 160 |
||
| 1053 | killagreg | 22 | unsigned char GetExternalControl = 0,DebugDisplayAnforderung1 = 0, DebugDisplayAnforderung = 0,DebugDataAnforderung = 0,GetVersionAnforderung = 0, GetPPMChannelAnforderung = 0; |
| 23 | unsigned char DisplayLine = 0; |
||
| 1 | ingob | 24 | unsigned volatile char SioTmp = 0; |
| 25 | unsigned volatile char NeuerDatensatzEmpfangen = 0; |
||
| 26 | unsigned volatile char NeueKoordinateEmpfangen = 0; |
||
| 27 | unsigned volatile char UebertragungAbgeschlossen = 1; |
||
| 28 | unsigned volatile char CntCrcError = 0; |
||
| 29 | unsigned volatile char AnzahlEmpfangsBytes = 0; |
||
| 1441 | ingob | 30 | unsigned volatile char TxdBuffer[MAX_SENDE_BUFF]; |
| 31 | unsigned volatile char RxdBuffer[MAX_EMPFANGS_BUFF]; |
||
| 32 | |||
| 1051 | killagreg | 33 | unsigned char *pRxData = 0; |
| 34 | unsigned char RxDataLen = 0; |
||
| 1 | ingob | 35 | unsigned volatile char PC_DebugTimeout = 0; |
| 1212 | hbuss | 36 | unsigned volatile char PC_MotortestActive = 0; |
| 1051 | killagreg | 37 | |
| 499 | hbuss | 38 | unsigned char DebugTextAnforderung = 255; |
| 1 | ingob | 39 | unsigned char PcZugriff = 100; |
| 1212 | hbuss | 40 | unsigned char MotorTest[16]; |
| 1036 | hbuss | 41 | unsigned char MeineSlaveAdresse = 1; // Flight-Ctrl |
| 595 | hbuss | 42 | unsigned char ConfirmFrame; |
| 1 | ingob | 43 | struct str_DebugOut DebugOut; |
| 595 | hbuss | 44 | struct str_ExternControl ExternControl; |
| 1 | ingob | 45 | struct str_VersionInfo VersionInfo; |
| 693 | hbuss | 46 | struct str_WinkelOut WinkelOut; |
| 1171 | hbuss | 47 | struct str_Data3D Data3D; |
| 1 | ingob | 48 | |
| 1399 | killagreg | 49 | int Display_Timer, Debug_Timer,Kompass_Timer,Timer3D; |
| 1415 | killagreg | 50 | unsigned int DebugDataIntervall = 0, Intervall3D = 0, Display_Interval = 0; |
| 51 | unsigned int AboTimeOut = 0; |
||
| 693 | hbuss | 52 | |
| 1490 | killagreg | 53 | const unsigned char ANALOG_TEXT[32][16] PROGMEM = |
| 499 | hbuss | 54 | { |
| 1051 | killagreg | 55 | //1234567890123456 |
| 1175 | hbuss | 56 | "AngleNick ", //0 |
| 57 | "AngleRoll ", |
||
| 1051 | killagreg | 58 | "AccNick ", |
| 499 | hbuss | 59 | "AccRoll ", |
| 1521 | killagreg | 60 | "YawGyro´ ", |
| 61 | "Height Value ", //5 |
||
| 499 | hbuss | 62 | "AccZ ", |
| 63 | "Gas ", |
||
| 1175 | hbuss | 64 | "Compass Value ", |
| 1521 | killagreg | 65 | "Voltage [0.1V] ", |
| 66 | "Receiver Level ", //10 |
||
| 67 | "Gyro Compass ", |
||
| 68 | "Motor 1 ", |
||
| 69 | "Motor 2 ", |
||
| 70 | "Motor 3 ", |
||
| 71 | "Motor 4 ", //15 |
||
| 929 | hbuss | 72 | " ", |
| 1175 | hbuss | 73 | " ", |
| 1253 | killagreg | 74 | "VarioMeter ", |
| 819 | hbuss | 75 | "MK3Mag CalState ", |
| 854 | hbuss | 76 | "Servo ", //20 |
| 1521 | killagreg | 77 | "Hovergas ", |
| 78 | "Current [0.1A] ", |
||
| 1501 | holgerb | 79 | "Capacity [mAh] ", |
| 720 | ingob | 80 | " ", |
| 1322 | hbuss | 81 | " ", //25 |
| 82 | " ", |
||
| 83 | " ", |
||
| 84 | "I2C-Error ", |
||
| 1521 | killagreg | 85 | " ", // "Navi Serial Data", |
| 720 | ingob | 86 | "GPS_Nick ", //30 |
| 87 | "GPS_Roll " |
||
| 499 | hbuss | 88 | }; |
| 89 | |||
| 90 | |||
| 1 | ingob | 91 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 92 | //++ Sende-Part der Datenübertragung |
||
| 93 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 94 | SIGNAL(INT_VEC_TX) |
||
| 95 | { |
||
| 96 | static unsigned int ptr = 0; |
||
| 97 | unsigned char tmp_tx; |
||
| 1051 | killagreg | 98 | if(!UebertragungAbgeschlossen) |
| 1 | ingob | 99 | { |
| 100 | ptr++; // die [0] wurde schon gesendet |
||
| 1438 | ingob | 101 | tmp_tx = TxdBuffer[ptr]; |
| 1 | ingob | 102 | if((tmp_tx == '\r') || (ptr == MAX_SENDE_BUFF)) |
| 103 | { |
||
| 104 | ptr = 0; |
||
| 105 | UebertragungAbgeschlossen = 1; |
||
| 106 | } |
||
| 1051 | killagreg | 107 | UDR = tmp_tx; |
| 108 | } |
||
| 1 | ingob | 109 | else ptr = 0; |
| 110 | } |
||
| 111 | |||
| 112 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 113 | //++ Empfangs-Part der Datenübertragung, incl. CRC-Auswertung |
||
| 114 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 115 | SIGNAL(INT_VEC_RX) |
||
| 116 | { |
||
| 117 | static unsigned int crc; |
||
| 118 | static unsigned char crc1,crc2,buf_ptr; |
||
| 119 | static unsigned char UartState = 0; |
||
| 120 | unsigned char CrcOkay = 0; |
||
| 121 | |||
| 1051 | killagreg | 122 | SioTmp = UDR; |
| 1438 | ingob | 123 | if(buf_ptr >= MAX_SENDE_BUFF) UartState = 0; |
| 1051 | killagreg | 124 | if(SioTmp == '\r' && UartState == 2) |
| 1 | ingob | 125 | { |
| 126 | UartState = 0; |
||
| 127 | crc -= RxdBuffer[buf_ptr-2]; |
||
| 128 | crc -= RxdBuffer[buf_ptr-1]; |
||
| 129 | crc %= 4096; |
||
| 130 | crc1 = '=' + crc / 64; |
||
| 131 | crc2 = '=' + crc % 64; |
||
| 132 | CrcOkay = 0; |
||
| 133 | if((crc1 == RxdBuffer[buf_ptr-2]) && (crc2 == RxdBuffer[buf_ptr-1])) CrcOkay = 1; else { CrcOkay = 0; CntCrcError++;}; |
||
| 134 | if(!NeuerDatensatzEmpfangen && CrcOkay) // Datensatz schon verarbeitet |
||
| 135 | { |
||
| 1051 | killagreg | 136 | NeuerDatensatzEmpfangen = 1; |
| 137 | AnzahlEmpfangsBytes = buf_ptr + 1; |
||
| 1 | ingob | 138 | RxdBuffer[buf_ptr] = '\r'; |
| 1253 | killagreg | 139 | if(RxdBuffer[2] == 'R') |
| 1232 | hbuss | 140 | { |
| 1435 | killagreg | 141 | LcdClear(); |
| 1232 | hbuss | 142 | wdt_enable(WDTO_250MS); // Reset-Commando |
| 143 | ServoActive = 0; |
||
| 1435 | killagreg | 144 | |
| 1253 | killagreg | 145 | } |
| 1051 | killagreg | 146 | } |
| 1 | ingob | 147 | } |
| 148 | else |
||
| 149 | switch(UartState) |
||
| 150 | { |
||
| 151 | case 0: |
||
| 152 | if(SioTmp == '#' && !NeuerDatensatzEmpfangen) UartState = 1; // Startzeichen und Daten schon verarbeitet |
||
| 153 | buf_ptr = 0; |
||
| 154 | RxdBuffer[buf_ptr++] = SioTmp; |
||
| 155 | crc = SioTmp; |
||
| 156 | break; |
||
| 157 | case 1: // Adresse auswerten |
||
| 158 | UartState++; |
||
| 159 | RxdBuffer[buf_ptr++] = SioTmp; |
||
| 160 | crc += SioTmp; |
||
| 161 | break; |
||
| 162 | case 2: // Eingangsdaten sammeln |
||
| 163 | RxdBuffer[buf_ptr] = SioTmp; |
||
| 1490 | killagreg | 164 | if(buf_ptr < MAX_EMPFANGS_BUFF) buf_ptr++; |
| 1 | ingob | 165 | else UartState = 0; |
| 166 | crc += SioTmp; |
||
| 167 | break; |
||
| 1051 | killagreg | 168 | default: |
| 169 | UartState = 0; |
||
| 1 | ingob | 170 | break; |
| 171 | } |
||
| 172 | } |
||
| 173 | |||
| 174 | |||
| 175 | // -------------------------------------------------------------------------- |
||
| 176 | void AddCRC(unsigned int wieviele) |
||
| 177 | { |
||
| 1051 | killagreg | 178 | unsigned int tmpCRC = 0,i; |
| 1 | ingob | 179 | for(i = 0; i < wieviele;i++) |
| 180 | { |
||
| 1438 | ingob | 181 | tmpCRC += TxdBuffer[i]; |
| 1 | ingob | 182 | } |
| 183 | tmpCRC %= 4096; |
||
| 1438 | ingob | 184 | TxdBuffer[i++] = '=' + tmpCRC / 64; |
| 185 | TxdBuffer[i++] = '=' + tmpCRC % 64; |
||
| 186 | TxdBuffer[i++] = '\r'; |
||
| 1 | ingob | 187 | UebertragungAbgeschlossen = 0; |
| 1438 | ingob | 188 | UDR = TxdBuffer[0]; |
| 1 | ingob | 189 | } |
| 190 | |||
| 191 | |||
| 192 | |||
| 193 | // -------------------------------------------------------------------------- |
||
| 1056 | killagreg | 194 | void SendOutData(unsigned char cmd,unsigned char address, unsigned char BufferAnzahl, ...) //unsigned char *snd, unsigned char len) |
| 1 | ingob | 195 | { |
| 1051 | killagreg | 196 | va_list ap; |
| 1 | ingob | 197 | unsigned int pt = 0; |
| 198 | unsigned char a,b,c; |
||
| 199 | unsigned char ptr = 0; |
||
| 200 | |||
| 1051 | killagreg | 201 | unsigned char *snd = 0; |
| 202 | int len = 0; |
||
| 203 | |||
| 1438 | ingob | 204 | TxdBuffer[pt++] = '#'; // Startzeichen |
| 205 | TxdBuffer[pt++] = 'a' + address; // Adresse (a=0; b=1,...) |
||
| 206 | TxdBuffer[pt++] = cmd; // Commando |
||
| 1 | ingob | 207 | |
| 1051 | killagreg | 208 | va_start(ap, BufferAnzahl); |
| 209 | if(BufferAnzahl) |
||
| 210 | { |
||
| 211 | snd = va_arg(ap, unsigned char*); |
||
| 212 | len = va_arg(ap, int); |
||
| 213 | ptr = 0; |
||
| 214 | BufferAnzahl--; |
||
| 215 | } |
||
| 1 | ingob | 216 | while(len) |
| 217 | { |
||
| 1051 | killagreg | 218 | if(len) |
| 219 | { |
||
| 220 | a = snd[ptr++]; |
||
| 221 | len--; |
||
| 222 | if((!len) && BufferAnzahl) |
||
| 223 | { |
||
| 224 | snd = va_arg(ap, unsigned char*); |
||
| 225 | len = va_arg(ap, int); |
||
| 226 | ptr = 0; |
||
| 227 | BufferAnzahl--; |
||
| 228 | } |
||
| 229 | } |
||
| 230 | else a = 0; |
||
| 231 | if(len) |
||
| 232 | { |
||
| 233 | b = snd[ptr++]; |
||
| 234 | len--; |
||
| 235 | if((!len) && BufferAnzahl) |
||
| 236 | { |
||
| 237 | snd = va_arg(ap, unsigned char*); |
||
| 238 | len = va_arg(ap, int); |
||
| 239 | ptr = 0; |
||
| 240 | BufferAnzahl--; |
||
| 241 | } |
||
| 242 | } |
||
| 243 | else b = 0; |
||
| 244 | if(len) |
||
| 245 | { |
||
| 246 | c = snd[ptr++]; |
||
| 247 | len--; |
||
| 248 | if((!len) && BufferAnzahl) |
||
| 249 | { |
||
| 250 | snd = va_arg(ap, unsigned char*); |
||
| 251 | len = va_arg(ap, int); |
||
| 252 | ptr = 0; |
||
| 253 | BufferAnzahl--; |
||
| 254 | } |
||
| 255 | } |
||
| 256 | else c = 0; |
||
| 1438 | ingob | 257 | TxdBuffer[pt++] = '=' + (a >> 2); |
| 258 | TxdBuffer[pt++] = '=' + (((a & 0x03) << 4) | ((b & 0xf0) >> 4)); |
||
| 259 | TxdBuffer[pt++] = '=' + (((b & 0x0f) << 2) | ((c & 0xc0) >> 6)); |
||
| 260 | TxdBuffer[pt++] = '=' + ( c & 0x3f); |
||
| 1 | ingob | 261 | } |
| 1051 | killagreg | 262 | va_end(ap); |
| 1 | ingob | 263 | AddCRC(pt); |
| 264 | } |
||
| 265 | |||
| 266 | // -------------------------------------------------------------------------- |
||
| 1051 | killagreg | 267 | void Decode64(void) // die daten werden im rx buffer dekodiert, das geht nur, weil aus 4 byte immer 3 gemacht werden. |
| 1 | ingob | 268 | { |
| 269 | unsigned char a,b,c,d; |
||
| 270 | unsigned char x,y,z; |
||
| 1051 | killagreg | 271 | unsigned char ptrIn = 3; // start at begin of data block |
| 272 | unsigned char ptrOut = 3; |
||
| 273 | unsigned char len = AnzahlEmpfangsBytes - 6; // von der Gesamtbytezahl eines Frames gehen 3 Bytes des Headers ('#',Addr, Cmd) und 3 Bytes des Footers (CRC1, CRC2, '\r') ab. |
||
| 274 | |||
| 1 | ingob | 275 | while(len) |
| 276 | { |
||
| 277 | a = RxdBuffer[ptrIn++] - '='; |
||
| 278 | b = RxdBuffer[ptrIn++] - '='; |
||
| 279 | c = RxdBuffer[ptrIn++] - '='; |
||
| 280 | d = RxdBuffer[ptrIn++] - '='; |
||
| 281 | |||
| 282 | x = (a << 2) | (b >> 4); |
||
| 283 | y = ((b & 0x0f) << 4) | (c >> 2); |
||
| 284 | z = ((c & 0x03) << 6) | d; |
||
| 285 | |||
| 1051 | killagreg | 286 | if(len--) RxdBuffer[ptrOut++] = x; else break; |
| 287 | if(len--) RxdBuffer[ptrOut++] = y; else break; |
||
| 288 | if(len--) RxdBuffer[ptrOut++] = z; else break; |
||
| 1 | ingob | 289 | } |
| 1051 | killagreg | 290 | pRxData = (unsigned char*)&RxdBuffer[3]; // decodierte Daten beginnen beim 4. Byte |
| 291 | RxDataLen = ptrOut - 3; // wie viele Bytes wurden dekodiert? |
||
| 1 | ingob | 292 | |
| 293 | } |
||
| 294 | |||
| 295 | // -------------------------------------------------------------------------- |
||
| 296 | void BearbeiteRxDaten(void) |
||
| 297 | { |
||
| 298 | if(!NeuerDatensatzEmpfangen) return; |
||
| 299 | |||
| 1058 | killagreg | 300 | unsigned char tempchar1, tempchar2; |
| 1056 | killagreg | 301 | Decode64(); // dekodiere datenblock im Empfangsbuffer |
| 1055 | ingob | 302 | switch(RxdBuffer[1]-'a') // check for Slave Address |
| 1054 | killagreg | 303 | { |
| 304 | case FC_ADDRESS: // FC special commands |
||
| 305 | switch(RxdBuffer[2]) |
||
| 306 | { |
||
| 307 | case 'K':// Kompasswert |
||
| 308 | memcpy((unsigned char *)&KompassValue , (unsigned char *)pRxData, sizeof(KompassValue)); |
||
| 309 | KompassRichtung = ((540 + KompassValue - KompassStartwert) % 360) - 180; |
||
| 310 | break; |
||
| 311 | case 't':// Motortest |
||
| 1212 | hbuss | 312 | if(AnzahlEmpfangsBytes > 20) memcpy(&MotorTest[0], (unsigned char *)pRxData, sizeof(MotorTest)); |
| 313 | else memcpy(&MotorTest[0], (unsigned char *)pRxData, 4); |
||
| 314 | PC_MotortestActive = 240; |
||
| 1065 | killagreg | 315 | //while(!UebertragungAbgeschlossen); |
| 316 | //SendOutData('T', MeineSlaveAdresse, 0); |
||
| 1054 | killagreg | 317 | PcZugriff = 255; |
| 318 | break; |
||
| 1053 | killagreg | 319 | |
| 1209 | hbuss | 320 | case 'n':// "Get Mixer |
| 321 | while(!UebertragungAbgeschlossen); |
||
| 322 | SendOutData('N', FC_ADDRESS, 1, (unsigned char *) &Mixer,sizeof(Mixer)); |
||
| 323 | break; |
||
| 324 | |||
| 325 | case 'm':// "Write Mixer |
||
| 326 | while(!UebertragungAbgeschlossen); |
||
| 1211 | hbuss | 327 | if(pRxData[0] == MIXER_REVISION) |
| 1521 | killagreg | 328 | { |
| 1211 | hbuss | 329 | memcpy(&Mixer, (unsigned char *)pRxData, sizeof(Mixer)); |
| 330 | eeprom_write_block(&Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
| 331 | tempchar1 = 1; |
||
| 1521 | killagreg | 332 | } |
| 333 | else tempchar1 = 0; |
||
| 1211 | hbuss | 334 | SendOutData('M', FC_ADDRESS, 1, &tempchar1, sizeof(tempchar1)); |
| 1209 | hbuss | 335 | break; |
| 336 | |||
| 1054 | killagreg | 337 | case 'p': // get PPM Channels |
| 338 | GetPPMChannelAnforderung = 1; |
||
| 1377 | hbuss | 339 | PcZugriff = 255; |
| 1054 | killagreg | 340 | break; |
| 1053 | killagreg | 341 | |
| 1054 | killagreg | 342 | case 'q':// "Get"-Anforderung für Settings |
| 343 | // Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
||
| 344 | if(pRxData[0] == 0xFF) |
||
| 345 | { |
||
| 346 | pRxData[0] = GetActiveParamSetNumber(); |
||
| 347 | } |
||
| 1063 | killagreg | 348 | // limit settings range |
| 349 | if(pRxData[0] < 1) pRxData[0] = 1; // limit to 5 |
||
| 350 | else if(pRxData[0] > 5) pRxData[0] = 5; // limit to 5 |
||
| 351 | // load requested parameter set |
||
| 352 | ReadParameterSet(pRxData[0], (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
||
| 353 | |||
| 1054 | killagreg | 354 | while(!UebertragungAbgeschlossen); |
| 1058 | killagreg | 355 | tempchar1 = pRxData[0]; |
| 356 | tempchar2 = EE_DATENREVISION; |
||
| 357 | SendOutData('Q', FC_ADDRESS, 3, &tempchar1, sizeof(tempchar1), &tempchar2, sizeof(tempchar2), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
||
| 1054 | killagreg | 358 | break; |
| 1051 | killagreg | 359 | |
| 1054 | killagreg | 360 | case 's': // Parametersatz speichern |
| 1058 | killagreg | 361 | if((1 <= pRxData[0]) && (pRxData[0] <= 5) && (pRxData[1] == EE_DATENREVISION)) // check for setting to be in range |
| 1054 | killagreg | 362 | { |
| 1058 | killagreg | 363 | memcpy((unsigned char *) &EE_Parameter.Kanalbelegung[0], (unsigned char *)&pRxData[2], STRUCT_PARAM_LAENGE); |
| 1054 | killagreg | 364 | WriteParameterSet(pRxData[0], (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
| 365 | Umschlag180Nick = (long) EE_Parameter.WinkelUmschlagNick * 2500L; |
||
| 366 | Umschlag180Roll = (long) EE_Parameter.WinkelUmschlagRoll * 2500L; |
||
| 1063 | killagreg | 367 | SetActiveParamSetNumber(pRxData[0]); |
| 368 | tempchar1 = GetActiveParamSetNumber(); |
||
| 1054 | killagreg | 369 | } |
| 1058 | killagreg | 370 | else |
| 371 | { |
||
| 372 | tempchar1 = 0; // mark in response an invlid setting |
||
| 373 | } |
||
| 374 | while(!UebertragungAbgeschlossen); |
||
| 375 | SendOutData('S', FC_ADDRESS, 1, &tempchar1, sizeof(tempchar1)); |
||
| 1405 | hbuss | 376 | if(!MotorenEin) Piep(tempchar1,110); |
| 377 | LipoDetection(0); |
||
| 1435 | killagreg | 378 | LIBFC_ReceiverInit(); |
| 1054 | killagreg | 379 | break; |
| 1405 | hbuss | 380 | case 'f': // auf anderen Parametersatz umschalten |
| 381 | if((1 <= pRxData[0]) && (pRxData[0] <= 5)) SetActiveParamSetNumber(pRxData[0]); |
||
| 382 | tempchar1 = pRxData[0]; |
||
| 383 | while(!UebertragungAbgeschlossen); |
||
| 384 | SendOutData('F', FC_ADDRESS, 1, &tempchar1, sizeof(tempchar1)); |
||
| 385 | if(!MotorenEin) Piep(tempchar1,110); |
||
| 386 | LipoDetection(0); |
||
| 1435 | killagreg | 387 | LIBFC_ReceiverInit(); |
| 1405 | hbuss | 388 | break; |
| 1391 | killagreg | 389 | case 'y':// serial Potis |
| 390 | PPM_in[13] = (signed char) pRxData[0]; PPM_in[14] = (signed char) pRxData[1]; PPM_in[15] = (signed char) pRxData[2]; PPM_in[16] = (signed char) pRxData[3]; |
||
| 391 | PPM_in[17] = (signed char) pRxData[4]; PPM_in[18] = (signed char) pRxData[5]; PPM_in[19] = (signed char) pRxData[6]; PPM_in[20] = (signed char) pRxData[7]; |
||
| 392 | PPM_in[21] = (signed char) pRxData[8]; PPM_in[22] = (signed char) pRxData[9]; PPM_in[23] = (signed char) pRxData[10]; PPM_in[24] = (signed char) pRxData[11]; |
||
| 393 | break; |
||
| 394 | |||
| 1056 | killagreg | 395 | } // case FC_ADDRESS: |
| 1054 | killagreg | 396 | |
| 397 | default: // any Slave Address |
||
| 1056 | killagreg | 398 | |
| 1054 | killagreg | 399 | switch(RxdBuffer[2]) |
| 400 | { |
||
| 401 | // 't' comand placed here only for compatibility to BL |
||
| 402 | case 't':// Motortest |
||
| 1212 | hbuss | 403 | if(AnzahlEmpfangsBytes > 20) memcpy(&MotorTest[0], (unsigned char *)pRxData, sizeof(MotorTest)); |
| 404 | else memcpy(&MotorTest[0], (unsigned char *)pRxData, 4); |
||
| 1054 | killagreg | 405 | while(!UebertragungAbgeschlossen); |
| 406 | SendOutData('T', MeineSlaveAdresse, 0); |
||
| 1212 | hbuss | 407 | PC_MotortestActive = 250; |
| 1054 | killagreg | 408 | PcZugriff = 255; |
| 409 | break; |
||
| 410 | // 'K' comand placed here only for compatibility to old MK3MAG software, that does not send the right Slave Address |
||
| 411 | case 'K':// Kompasswert |
||
| 412 | memcpy((unsigned char *)&KompassValue , (unsigned char *)pRxData, sizeof(KompassValue)); |
||
| 413 | KompassRichtung = ((540 + KompassValue - KompassStartwert) % 360) - 180; |
||
| 414 | break; |
||
| 415 | case 'a':// Texte der Analogwerte |
||
| 416 | DebugTextAnforderung = pRxData[0]; |
||
| 417 | if (DebugTextAnforderung > 31) DebugTextAnforderung = 31; |
||
| 418 | PcZugriff = 255; |
||
| 419 | break; |
||
| 420 | case 'b': |
||
| 421 | memcpy((unsigned char *)&ExternControl, (unsigned char *)pRxData, sizeof(ExternControl)); |
||
| 422 | ConfirmFrame = ExternControl.Frame; |
||
| 423 | PcZugriff = 255; |
||
| 424 | break; |
||
| 1171 | hbuss | 425 | case 'c': // Poll the 3D-Data |
| 426 | if(!Intervall3D) { if(pRxData[0]) Timer3D = SetDelay(pRxData[0] * 10);} |
||
| 427 | Intervall3D = pRxData[0] * 10; |
||
| 1417 | killagreg | 428 | AboTimeOut = SetDelay(ABO_TIMEOUT); |
| 1171 | hbuss | 429 | break; |
| 1054 | killagreg | 430 | case 'd': // Poll the debug data |
| 1438 | ingob | 431 | PcZugriff = 255; |
| 1399 | killagreg | 432 | DebugDataIntervall = (unsigned int)pRxData[0] * 10; |
| 1171 | hbuss | 433 | if(DebugDataIntervall > 0) DebugDataAnforderung = 1; |
| 1415 | killagreg | 434 | AboTimeOut = SetDelay(ABO_TIMEOUT); |
| 1054 | killagreg | 435 | break; |
| 436 | |||
| 437 | case 'h':// x-1 Displayzeilen |
||
| 1059 | hbuss | 438 | PcZugriff = 255; |
| 1399 | killagreg | 439 | if((pRxData[0] & 0x80) == 0x00) // old format |
| 440 | { |
||
| 441 | DisplayLine = 2; |
||
| 442 | Display_Interval = 0; |
||
| 443 | } |
||
| 444 | else // new format |
||
| 445 | { |
||
| 446 | RemoteKeys |= ~pRxData[0]; |
||
| 447 | Display_Interval = (unsigned int)pRxData[1] * 10; |
||
| 448 | DisplayLine = 4; |
||
| 1415 | killagreg | 449 | AboTimeOut = SetDelay(ABO_TIMEOUT); |
| 1399 | killagreg | 450 | } |
| 1054 | killagreg | 451 | DebugDisplayAnforderung = 1; |
| 452 | break; |
||
| 453 | |||
| 454 | case 'l':// x-1 Displayzeilen |
||
| 1059 | hbuss | 455 | PcZugriff = 255; |
| 1054 | killagreg | 456 | MenuePunkt = pRxData[0]; |
| 457 | DebugDisplayAnforderung1 = 1; |
||
| 458 | break; |
||
| 459 | case 'v': // Version-Anforderung und Ausbaustufe |
||
| 460 | GetVersionAnforderung = 1; |
||
| 461 | break; |
||
| 462 | |||
| 463 | case 'g':// |
||
| 464 | GetExternalControl = 1; |
||
| 465 | break; |
||
| 466 | } |
||
| 467 | break; // default: |
||
| 468 | } |
||
| 1051 | killagreg | 469 | NeuerDatensatzEmpfangen = 0; |
| 470 | pRxData = 0; |
||
| 471 | RxDataLen = 0; |
||
| 1 | ingob | 472 | } |
| 473 | |||
| 474 | //############################################################################ |
||
| 475 | //Routine für die Serielle Ausgabe |
||
| 1444 | ingob | 476 | void uart_putchar (char c) |
| 1 | ingob | 477 | //############################################################################ |
| 478 | { |
||
| 1444 | ingob | 479 | //if (c == '\n') uart_putchar('\r'); |
| 1 | ingob | 480 | //Warten solange bis Zeichen gesendet wurde |
| 481 | loop_until_bit_is_set(USR, UDRE); |
||
| 482 | //Ausgabe des Zeichens |
||
| 483 | UDR = c; |
||
| 484 | } |
||
| 485 | |||
| 486 | |||
| 487 | //############################################################################ |
||
| 488 | //INstallation der Seriellen Schnittstelle |
||
| 489 | void UART_Init (void) |
||
| 490 | //############################################################################ |
||
| 491 | { |
||
| 492 | //Enable TXEN im Register UCR TX-Data Enable & RX Enable |
||
| 493 | |||
| 494 | UCR=(1 << TXEN) | (1 << RXEN); |
||
| 495 | // UART Double Speed (U2X) |
||
| 1051 | killagreg | 496 | USR |= (1<<U2X); |
| 1 | ingob | 497 | // RX-Interrupt Freigabe |
| 1051 | killagreg | 498 | UCSRB |= (1<<RXCIE); |
| 1 | ingob | 499 | // TX-Interrupt Freigabe |
| 1051 | killagreg | 500 | UCSRB |= (1<<TXCIE); |
| 1 | ingob | 501 | |
| 1051 | killagreg | 502 | //Teiler wird gesetzt |
| 1 | ingob | 503 | UBRR=(SYSCLK / (BAUD_RATE * 8L) - 1); |
| 504 | //UBRR = 33; |
||
| 505 | //öffnet einen Kanal für printf (STDOUT) |
||
| 506 | //fdevopen (uart_putchar, 0); |
||
| 507 | //sbi(PORTD,4); |
||
| 1051 | killagreg | 508 | Debug_Timer = SetDelay(DebugDataIntervall); |
| 509 | Kompass_Timer = SetDelay(220); |
||
| 510 | |||
| 1058 | killagreg | 511 | VersionInfo.SWMajor = VERSION_MAJOR; |
| 512 | VersionInfo.SWMinor = VERSION_MINOR; |
||
| 513 | VersionInfo.SWPatch = VERSION_PATCH; |
||
| 514 | VersionInfo.ProtoMajor = VERSION_SERIAL_MAJOR; |
||
| 515 | VersionInfo.ProtoMinor = VERSION_SERIAL_MINOR; |
||
| 1051 | killagreg | 516 | |
| 517 | pRxData = 0; |
||
| 518 | RxDataLen = 0; |
||
| 1 | ingob | 519 | } |
| 520 | |||
| 521 | //--------------------------------------------------------------------------------------------- |
||
| 1051 | killagreg | 522 | void DatenUebertragung(void) |
| 1 | ingob | 523 | { |
| 1415 | killagreg | 524 | if(!UebertragungAbgeschlossen) return; |
| 1 | ingob | 525 | |
| 1415 | killagreg | 526 | if(CheckDelay(AboTimeOut)) |
| 527 | { |
||
| 528 | Display_Interval = 0; |
||
| 529 | DebugDataIntervall = 0; |
||
| 1417 | killagreg | 530 | Intervall3D = 0; |
| 1415 | killagreg | 531 | } |
| 532 | |||
| 1399 | killagreg | 533 | if(((Display_Interval>0 && CheckDelay(Display_Timer)) || DebugDisplayAnforderung) && UebertragungAbgeschlossen) |
| 1065 | killagreg | 534 | { |
| 1399 | killagreg | 535 | if(DisplayLine > 3)// new format |
| 536 | { |
||
| 1423 | hbuss | 537 | Menu(); |
| 1399 | killagreg | 538 | SendOutData('H', FC_ADDRESS, 1, (uint8_t *)DisplayBuff, 80); |
| 539 | } |
||
| 540 | else // old format |
||
| 541 | { |
||
| 542 | LCD_printfxy(0,0,"!!! INCOMPATIBLE !!!"); |
||
| 543 | SendOutData('H', FC_ADDRESS, 2, &DisplayLine, sizeof(DisplayLine), (uint8_t *)DisplayBuff, 20); |
||
| 544 | if(DisplayLine++ > 3) DisplayLine = 0; |
||
| 545 | } |
||
| 546 | Display_Timer = SetDelay(Display_Interval); |
||
| 1065 | killagreg | 547 | DebugDisplayAnforderung = 0; |
| 548 | } |
||
| 549 | if(DebugDisplayAnforderung1 && UebertragungAbgeschlossen) |
||
| 550 | { |
||
| 551 | Menu(); |
||
| 552 | SendOutData('L', FC_ADDRESS, 3, &MenuePunkt, sizeof(MenuePunkt), &MaxMenue, sizeof(MaxMenue), DisplayBuff, sizeof(DisplayBuff)); |
||
| 553 | DebugDisplayAnforderung1 = 0; |
||
| 554 | } |
||
| 555 | if(GetVersionAnforderung && UebertragungAbgeschlossen) |
||
| 556 | { |
||
| 557 | SendOutData('V', FC_ADDRESS, 1, (unsigned char *) &VersionInfo, sizeof(VersionInfo)); |
||
| 558 | GetVersionAnforderung = 0; |
||
| 559 | } |
||
| 1 | ingob | 560 | |
| 1065 | killagreg | 561 | if(GetExternalControl && UebertragungAbgeschlossen) // Bei Get werden die vom PC einstellbaren Werte vom PC zurückgelesen |
| 562 | { |
||
| 563 | SendOutData('G',MeineSlaveAdresse, 1, (unsigned char *) &ExternControl, sizeof(ExternControl)); |
||
| 564 | GetExternalControl = 0; |
||
| 565 | } |
||
| 1051 | killagreg | 566 | if((CheckDelay(Kompass_Timer)) && UebertragungAbgeschlossen) |
| 693 | hbuss | 567 | { |
| 1171 | hbuss | 568 | WinkelOut.Winkel[0] = (int) (IntegralNick / (EE_Parameter.GyroAccFaktor * 4)); // etwa in 0.1 Grad |
| 569 | WinkelOut.Winkel[1] = (int) (IntegralRoll / (EE_Parameter.GyroAccFaktor * 4)); // etwa in 0.1 Grad |
||
| 717 | hbuss | 570 | WinkelOut.UserParameter[0] = Parameter_UserParam1; |
| 571 | WinkelOut.UserParameter[1] = Parameter_UserParam2; |
||
| 1054 | killagreg | 572 | SendOutData('w', MK3MAG_ADDRESS, 1, (unsigned char *) &WinkelOut,sizeof(WinkelOut)); |
| 855 | hbuss | 573 | if(WinkelOut.CalcState > 4) WinkelOut.CalcState = 6; // wird dann in SPI auf Null gesetzt |
| 1051 | killagreg | 574 | Kompass_Timer = SetDelay(99); |
| 575 | } |
||
| 1171 | hbuss | 576 | if(((DebugDataIntervall>0 && CheckDelay(Debug_Timer)) || DebugDataAnforderung) && UebertragungAbgeschlossen) |
| 1 | ingob | 577 | { |
| 1391 | killagreg | 578 | //if(Poti3 > 64) |
| 1276 | hbuss | 579 | SendOutData('D', FC_ADDRESS, 1, (unsigned char *) &DebugOut,sizeof(DebugOut)); |
| 1 | ingob | 580 | DebugDataAnforderung = 0; |
| 1055 | ingob | 581 | if(DebugDataIntervall>0) Debug_Timer = SetDelay(DebugDataIntervall); |
| 1051 | killagreg | 582 | } |
| 1171 | hbuss | 583 | if(Intervall3D > 0 && CheckDelay(Timer3D) && UebertragungAbgeschlossen) |
| 584 | { |
||
| 585 | Data3D.Winkel[0] = (int) (IntegralNick / (EE_Parameter.GyroAccFaktor * 4)); // etwa in 0.1 Grad |
||
| 586 | Data3D.Winkel[1] = (int) (IntegralRoll / (EE_Parameter.GyroAccFaktor * 4)); // etwa in 0.1 Grad |
||
| 587 | Data3D.Winkel[2] = (int) ((10 * ErsatzKompass) / GIER_GRAD_FAKTOR); |
||
| 588 | SendOutData('C', FC_ADDRESS, 1, (unsigned char *) &Data3D,sizeof(Data3D)); |
||
| 589 | Timer3D = SetDelay(Intervall3D); |
||
| 590 | } |
||
| 499 | hbuss | 591 | if(DebugTextAnforderung != 255) // Texte für die Analogdaten |
| 592 | { |
||
| 1490 | killagreg | 593 | unsigned char label[16]; // local sram buffer |
| 594 | memcpy_P(label, ANALOG_TEXT[DebugTextAnforderung], 16); // read lable from flash to sra |
||
| 595 | SendOutData('A', FC_ADDRESS, 2, (unsigned char *)&DebugTextAnforderung, sizeof(DebugTextAnforderung),label, 16); |
||
| 499 | hbuss | 596 | DebugTextAnforderung = 255; |
| 597 | } |
||
| 1051 | killagreg | 598 | if(ConfirmFrame && UebertragungAbgeschlossen) // Datensatz bestätigen |
| 595 | hbuss | 599 | { |
| 1054 | killagreg | 600 | SendOutData('B', FC_ADDRESS, 1, (uint8_t*)&ConfirmFrame, sizeof(ConfirmFrame)); |
| 1051 | killagreg | 601 | ConfirmFrame = 0; |
| 595 | hbuss | 602 | } |
| 1053 | killagreg | 603 | |
| 1051 | killagreg | 604 | if(GetPPMChannelAnforderung && UebertragungAbgeschlossen) |
| 605 | { |
||
| 1054 | killagreg | 606 | SendOutData('P', FC_ADDRESS, 1, (unsigned char *) &PPM_in, sizeof(PPM_in)); |
| 1051 | killagreg | 607 | GetPPMChannelAnforderung = 0; |
| 608 | } |
||
| 1 | ingob | 609 | |
| 610 | } |
||
| 611 |