Subversion Repositories FlightCtrl

Rev

Go to most recent revision | Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
1 ingob 1
/*#######################################################################################
2
Flight Control
3
#######################################################################################*/
4
 
5
#ifndef _FC_H
6
#define _FC_H
7
 
173 holgerb 8
extern volatile unsigned int I2CTimeout;
1 ingob 9
extern unsigned char Sekunde,Minute;
10
extern volatile long IntegralNick,IntegralNick2;
11
extern volatile long IntegralRoll,IntegralRoll2;
12
extern volatile long Mess_IntegralNick,Mess_IntegralNick2;
13
extern volatile long Mess_IntegralRoll,Mess_IntegralRoll2;
396 hbuss 14
extern volatile long IntegralAccNick,IntegralAccRoll;
1 ingob 15
extern volatile long Mess_Integral_Hoch;
16
extern volatile long Integral_Gier,Mess_Integral_Gier,Mess_Integral_Gier2;
17
extern volatile int  KompassValue;
18
extern volatile int  KompassStartwert;
19
extern volatile int  KompassRichtung;
20
extern int HoehenWert;
21
extern int SollHoehe;
22
extern volatile int MesswertNick,MesswertRoll,MesswertGier;
23
extern volatile int AdNeutralNick,AdNeutralRoll,AdNeutralGier, Mittelwert_AccNick, Mittelwert_AccRoll;
24
extern volatile int NeutralAccX, NeutralAccY,Mittelwert_AccHoch;
25
extern volatile float NeutralAccZ;
396 hbuss 26
extern long Umschlag180Nick, Umschlag180Roll;
492 hbuss 27
extern signed int ExternStickNick,ExternStickRoll,ExternStickGier;
513 hbuss 28
extern unsigned char Parameter_UserParam1,Parameter_UserParam2,Parameter_UserParam3,Parameter_UserParam4,Parameter_UserParam5,Parameter_UserParam6,Parameter_UserParam7,Parameter_UserParam8;
1 ingob 29
 
30
void MotorRegler(void);
31
void SendMotorData(void);
32
void CalibrierMittelwert(void);
33
void Mittelwert(void);
34
void SetNeutral(void);
304 ingob 35
void Piep(unsigned char Anzahl);
36
extern void DefaultKonstanten(void);
37
void DefaultKonstanten1(void);
38
void DefaultKonstanten2(void);
1 ingob 39
 
304 ingob 40
extern unsigned char h,m,s;
41
extern volatile unsigned char Timeout ;
42
extern unsigned char CosinusNickWinkel, CosinusRollWinkel;
43
extern volatile long IntegralNick,IntegralNick2;
44
extern volatile long IntegralRoll,IntegralRoll2;
45
extern volatile long Integral_Gier;
46
extern volatile long Mess_IntegralNick,Mess_IntegralNick2;
47
extern volatile long Mess_IntegralRoll,Mess_IntegralRoll2;
48
extern volatile long Mess_Integral_Gier;
49
extern volatile int  DiffNick,DiffRoll;
1 ingob 50
extern int  Poti1, Poti2, Poti3, Poti4;
304 ingob 51
extern volatile unsigned char Motor_Vorne,Motor_Hinten,Motor_Rechts,Motor_Links, Count;
52
extern unsigned char MotorWert[5];
53
extern volatile unsigned char SenderOkay;
54
extern int StickNick,StickRoll,StickGier;
55
extern char MotorenEin;
396 hbuss 56
extern void DefaultKonstanten1(void);
57
extern void DefaultKonstanten2(void);
1 ingob 58
 
499 hbuss 59
#define  STRUCT_PARAM_LAENGE  71
1 ingob 60
struct mk_param_struct
61
 {
62
   unsigned char Kanalbelegung[8];        // GAS[0], GIER[1],NICK[2], ROLL[3], POTI1, POTI2, POTI3
63
   unsigned char GlobalConfig;            // 0x01=Höhenregler aktiv,0x02=Kompass aktiv, 0x04=GPS aktiv, 0x08=Heading Hold aktiv
64
   unsigned char Hoehe_MinGas;            // Wert : 0-100
65
   unsigned char Luftdruck_D;             // Wert : 0-250
66
   unsigned char MaxHoehe;                // Wert : 0-32
67
   unsigned char Hoehe_P;                 // Wert : 0-32
68
   unsigned char Hoehe_Verstaerkung;      // Wert : 0-50
69
   unsigned char Hoehe_ACC_Wirkung;      // Wert : 0-250
70
   unsigned char Stick_P;                // Wert : 1-6
71
   unsigned char Stick_D;                // Wert : 0-64
72
   unsigned char Gier_P;                 // Wert : 1-20
73
   unsigned char Gas_Min;                // Wert : 0-32
74
   unsigned char Gas_Max;                // Wert : 33-250
75
   unsigned char GyroAccFaktor;          // Wert : 1-64
76
   unsigned char KompassWirkung;         // Wert : 0-32
77
   unsigned char Gyro_P;                 // Wert : 10-250
78
   unsigned char Gyro_I;                 // Wert : 0-250
79
   unsigned char UnterspannungsWarnung;  // Wert : 0-250
80
   unsigned char NotGas;                 // Wert : 0-250     //Gaswert bei Empängsverlust
81
   unsigned char NotGasZeit;             // Wert : 0-250     // Zeitbis auf NotGas geschaltet wird, wg. Rx-Problemen
82
   unsigned char UfoAusrichtung;         // X oder + Formation
83
   unsigned char I_Faktor;               // Wert : 0-250
84
   unsigned char UserParam1;             // Wert : 0-250
85
   unsigned char UserParam2;             // Wert : 0-250
86
   unsigned char UserParam3;             // Wert : 0-250
87
   unsigned char UserParam4;             // Wert : 0-250
88
   unsigned char ServoNickControl;       // Wert : 0-250     // Stellung des Servos
89
   unsigned char ServoNickComp;          // Wert : 0-250     // Einfluss Gyro/Servo
90
   unsigned char ServoNickMin;           // Wert : 0-250     // Anschlag
91
   unsigned char ServoNickMax;           // Wert : 0-250     // Anschlag
173 holgerb 92
   unsigned char ServoNickRefresh;       //
93
   unsigned char LoopGasLimit;           // Wert: 0-250  max. Gas während Looping
94
   unsigned char LoopThreshold;          // Wert: 0-250  Schwelle für Stickausschlag
396 hbuss 95
   unsigned char LoopHysterese;          // Wert: 0-250  Hysterese für Stickausschlag
96
   unsigned char AchsKopplung1;          // Wert: 0-250  Faktor, mit dem Gier die Achsen Roll und Nick koppelt (NickRollMitkopplung)
97
   unsigned char AchsGegenKopplung1;     // Wert: 0-250  Faktor, mit dem Gier die Achsen Roll und Nick Gegenkoppelt (NickRollGegenkopplung)
98
   unsigned char WinkelUmschlagNick;     // Wert: 0-250  180°-Punkt
99
   unsigned char WinkelUmschlagRoll;     // Wert: 0-250  180°-Punkt
100
   unsigned char GyroAccAbgleich;        // 1/k  (Koppel_ACC_Wirkung)
499 hbuss 101
   unsigned char Driftkomp;              
102
   unsigned char DynamicStability;
103
   unsigned char UserParam5;             // Wert : 0-250
104
   unsigned char UserParam6;             // Wert : 0-250
105
   unsigned char UserParam7;             // Wert : 0-250
106
   unsigned char UserParam8;             // Wert : 0-250
107
 
173 holgerb 108
//------------------------------------------------
109
   unsigned char LoopConfig;             // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
110
   unsigned char ServoNickCompInvert;    // Wert : 0-250   0 oder 1  // WICHTIG!!! am Ende lassen
111
   unsigned char Reserved[4];
1 ingob 112
   char Name[12];
113
 };
114
 
396 hbuss 115
 
173 holgerb 116
/*
117
unsigned char ServoNickMax;           // Wert : 0-250
118
    unsigned char ServoNickRefresh;       //
119
    unsigned char LoopGasLimit;           // Wert: 0-250  max. Gas während Looping
120
    unsigned char LoopThreshold;          // Wert: 0-250  Schwelle für Stickausschlag
121
//------------------------------------------------
122
    unsigned char LoopConfig;             // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt
123
    unsigned char ServoNickCompInvert;    // Wert : 0-250   0 oder 1  // WICHTIG!!! am Ende lassen
124
    unsigned char Reserved[4];
125
    char Name[12];
126
*/
127
 
1 ingob 128
extern struct mk_param_struct EE_Parameter;
129
 
130
extern unsigned char Parameter_Luftdruck_D;
131
extern unsigned char Parameter_MaxHoehe;
132
extern unsigned char Parameter_Hoehe_P;
133
extern unsigned char Parameter_Hoehe_ACC_Wirkung;
134
extern unsigned char Parameter_KompassWirkung;
135
extern unsigned char Parameter_Gyro_P;
136
extern unsigned char Parameter_Gyro_I;
137
extern unsigned char Parameter_Gier_P;
138
extern unsigned char Parameter_ServoNickControl;
396 hbuss 139
extern unsigned char Parameter_AchsKopplung1;
140
extern unsigned char Parameter_AchsGegenKopplung1;
1 ingob 141
 
396 hbuss 142
 
1 ingob 143
#endif //_FC_H
144