Rev 1652 | Rev 1657 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
| Rev | Author | Line No. | Line |
|---|---|---|---|
| 1622 | killagreg | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 2 | // + Copyright (c) Holger Buss, Ingo Busker |
||
| 3 | // + Nur für den privaten Gebrauch |
||
| 4 | // + porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
||
| 5 | // + www.MikroKopter.com |
||
| 6 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 7 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
||
| 8 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten (nicht-kommerziellen) Gebrauch zulässig ist. |
||
| 9 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
| 10 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
| 11 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
||
| 12 | // + Verkauf von Luftbildaufnahmen, usw. |
||
| 13 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 14 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
||
| 15 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
||
| 16 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 17 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
| 18 | // + auf anderen Webseiten oder sonstigen Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
| 19 | // + eindeutig als Ursprung verlinkt werden |
||
| 20 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 21 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
| 22 | // + Benutzung auf eigene Gefahr |
||
| 23 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
| 24 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 25 | // + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
||
| 26 | // + mit unserer Zustimmung zulässig |
||
| 27 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 28 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
| 29 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 30 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
||
| 31 | // + this list of conditions and the following disclaimer. |
||
| 32 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
| 33 | // + from this software without specific prior written permission. |
||
| 34 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
||
| 35 | // + for non-commercial use (directly or indirectly) |
||
| 36 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
||
| 37 | // + with our written permission |
||
| 38 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
||
| 39 | // + clearly linked as origin |
||
| 40 | // + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
||
| 41 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
| 42 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
| 43 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
| 44 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
| 45 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
| 46 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
| 47 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
| 48 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN// + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
| 49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
| 50 | // + POSSIBILITY OF SUCH DAMAGE. |
||
| 51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
| 52 | |||
| 395 | hbuss | 53 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1622 | killagreg | 54 | // + Contant Values |
| 55 | // + 0-250 -> normale Values |
||
| 56 | // + 251 -> Poti1 |
||
| 57 | // + 252 -> Poti2 |
||
| 395 | hbuss | 58 | // + 253 -> Poti3 |
| 1622 | killagreg | 59 | // + 254 -> Poti4 |
| 395 | hbuss | 60 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| 1622 | killagreg | 61 | |
| 62 | #ifndef EEMEM |
||
| 63 | #define EEMEM __attribute__ ((section (".eeprom"))) |
||
| 64 | #endif |
||
| 65 | |||
| 66 | |||
| 67 | #include <avr/eeprom.h> |
||
| 68 | #include <string.h> |
||
| 69 | #include "eeprom.h" |
||
| 70 | #include "uart.h" |
||
| 71 | #include "led.h" |
||
| 72 | #include "main.h" |
||
| 73 | #include "fc.h" |
||
| 74 | |||
| 75 | paramset_t EE_Parameter; |
||
| 76 | MixerTable_t Mixer; |
||
| 1654 | killagreg | 77 | uint8_t RequiredMotors; |
| 1622 | killagreg | 78 | |
| 79 | |||
| 80 | uint8_t RAM_Checksum(uint8_t* pBuffer, uint16_t len) |
||
| 395 | hbuss | 81 | { |
| 1622 | killagreg | 82 | uint8_t crc = 0xAA; |
| 83 | uint16_t i; |
||
| 84 | |||
| 85 | for(i=0; i<len; i++) |
||
| 86 | { |
||
| 87 | crc += pBuffer[i]; |
||
| 88 | } |
||
| 89 | return crc; |
||
| 993 | hbuss | 90 | } |
| 91 | |||
| 1622 | killagreg | 92 | uint8_t EEProm_Checksum(uint16_t EEAddr, uint16_t len) |
| 993 | hbuss | 93 | { |
| 1622 | killagreg | 94 | uint8_t crc = 0xAA; |
| 95 | uint16_t off; |
||
| 96 | |||
| 97 | for(off=0; off<len; off++) |
||
| 98 | { |
||
| 99 | crc += eeprom_read_byte((uint8_t*)(EEAddr + off));; |
||
| 100 | } |
||
| 101 | return crc; |
||
| 395 | hbuss | 102 | } |
| 1622 | killagreg | 103 | |
| 104 | void ParamSet_DefaultStickMapping(void) |
||
| 395 | hbuss | 105 | { |
| 1622 | killagreg | 106 | EE_Parameter.Kanalbelegung[K_GAS] = 1; |
| 107 | EE_Parameter.Kanalbelegung[K_ROLL] = 2; |
||
| 108 | EE_Parameter.Kanalbelegung[K_NICK] = 3; |
||
| 109 | EE_Parameter.Kanalbelegung[K_GIER] = 4; |
||
| 110 | EE_Parameter.Kanalbelegung[K_POTI1] = 5; |
||
| 111 | EE_Parameter.Kanalbelegung[K_POTI2] = 6; |
||
| 112 | EE_Parameter.Kanalbelegung[K_POTI3] = 7; |
||
| 113 | EE_Parameter.Kanalbelegung[K_POTI4] = 8; |
||
| 114 | EE_Parameter.Kanalbelegung[K_POTI5] = 9; |
||
| 115 | EE_Parameter.Kanalbelegung[K_POTI6] = 10; |
||
| 116 | EE_Parameter.Kanalbelegung[K_POTI7] = 11; |
||
| 117 | EE_Parameter.Kanalbelegung[K_POTI8] = 12; |
||
| 395 | hbuss | 118 | } |
| 119 | |||
| 1622 | killagreg | 120 | |
| 121 | /***************************************************/ |
||
| 122 | /* Default Values for parameter set 1 */ |
||
| 123 | /***************************************************/ |
||
| 124 | void ParamSet_DefaultSet1(void) // sport |
||
| 395 | hbuss | 125 | { |
| 1622 | killagreg | 126 | EE_Parameter.Revision = EEPARAM_REVISION; |
| 127 | |||
| 128 | if(PlatinenVersion >= 20) |
||
| 129 | { |
||
| 130 | EE_Parameter.Gyro_D = 5; |
||
| 131 | EE_Parameter.Driftkomp = 0; |
||
| 132 | EE_Parameter.GyroAccFaktor = 27; |
||
| 133 | EE_Parameter.WinkelUmschlagNick = 78; |
||
| 134 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
| 135 | } |
||
| 136 | else |
||
| 137 | { |
||
| 138 | EE_Parameter.Gyro_D = 3; |
||
| 139 | EE_Parameter.Driftkomp = 32; |
||
| 140 | EE_Parameter.GyroAccFaktor = 30; |
||
| 141 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 142 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 143 | } |
||
| 144 | EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV | CFG_KOMPASS_AKTIV | CFG_GPS_AKTIV | CFG_HOEHEN_SCHALTER; |
||
| 145 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT;// | CFG2_VARIO_BEEP | CFG_SENSITIVE_RC |
||
| 146 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 147 | EE_Parameter.MaxHoehe = 255; // Wert : 0-247 255 -> Poti1 |
||
| 148 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 149 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-247 |
||
| 150 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-247 |
||
| 151 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-247 |
||
| 152 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-247 |
||
| 153 | EE_Parameter.Hoehe_StickNeutralPoint = 0; // Wert : 0-247 (0 = Hover-Estimation) |
||
| 154 | EE_Parameter.Hoehe_Verstaerkung = 20; // Wert : 0-50 |
||
| 155 | EE_Parameter.Stick_P = 14; // Wert : 1-6 |
||
| 156 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 157 | EE_Parameter.Gier_P = 12; // Wert : 1-20 |
||
| 158 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 159 | EE_Parameter.Gas_Max = 230; // Wert : 33-247 |
||
| 160 | EE_Parameter.KompassWirkung = 128; // Wert : 0-247 |
||
| 161 | EE_Parameter.Gyro_P = 80; // Wert : 0-247 |
||
| 162 | EE_Parameter.Gyro_I = 150; // Wert : 0-247 |
||
| 163 | EE_Parameter.Gyro_Gier_P = 80; // Wert : 0-247 |
||
| 164 | EE_Parameter.Gyro_Gier_I = 150; // Wert : 0-247 |
||
| 165 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-247 ( Automatische Zellenerkennung bei < 50) |
||
| 166 | EE_Parameter.NotGas = 35; // Wert : 0-247 // Gaswert bei Empangsverlust |
||
| 1652 | holgerb | 167 | EE_Parameter.NotGasZeit = 60; // Wert : 0-247 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
| 1622 | killagreg | 168 | EE_Parameter.I_Faktor = 32; |
| 169 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 170 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 171 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 172 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 173 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 174 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 175 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 176 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 177 | EE_Parameter.ServoNickControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 178 | EE_Parameter.ServoNickComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 179 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-247 // Richtung Einfluss Gyro/Servo |
||
| 180 | EE_Parameter.ServoNickMin = 0; // Wert : 0-247 // Anschlag |
||
| 181 | EE_Parameter.ServoNickMax = 247; // Wert : 0-247 // Anschlag |
||
| 182 | EE_Parameter.ServoNickRefresh = 6; |
||
| 183 | EE_Parameter.Servo3 = 125; |
||
| 184 | EE_Parameter.Servo4 = 125; |
||
| 185 | EE_Parameter.Servo5 = 125; |
||
| 186 | EE_Parameter.ServoRollControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 187 | EE_Parameter.ServoRollComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 188 | EE_Parameter.ServoRollMin = 0; // Wert : 0-247 // Anschlag |
||
| 189 | EE_Parameter.ServoRollMax = 247; // Wert : 0-247 // Anschlag |
||
| 190 | EE_Parameter.LoopGasLimit = 50; |
||
| 191 | EE_Parameter.LoopThreshold = 90; // Wert: 0-247 Schwelle für Stickausschlag |
||
| 192 | EE_Parameter.LoopHysterese = 50; |
||
| 193 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts / wird getrennt behandelt |
||
| 194 | EE_Parameter.AchsKopplung1 = 90; |
||
| 195 | EE_Parameter.AchsKopplung2 = 80; |
||
| 196 | EE_Parameter.CouplingYawCorrection = 1; |
||
| 197 | EE_Parameter.GyroAccAbgleich = 16; // 1/k; |
||
| 198 | EE_Parameter.DynamicStability = 100; |
||
| 199 | EE_Parameter.J16Bitmask = 95; |
||
| 200 | EE_Parameter.J17Bitmask = 243; |
||
| 201 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 202 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 203 | EE_Parameter.J16Timing = 15; |
||
| 204 | EE_Parameter.J17Timing = 15; |
||
| 205 | EE_Parameter.NaviGpsModeControl = 254; // 254 -> Poti 2 |
||
| 206 | EE_Parameter.NaviGpsGain = 100; |
||
| 207 | EE_Parameter.NaviGpsP = 90; |
||
| 208 | EE_Parameter.NaviGpsI = 90; |
||
| 209 | EE_Parameter.NaviGpsD = 90; |
||
| 210 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 211 | EE_Parameter.NaviGpsILimit = 75; |
||
| 212 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 213 | EE_Parameter.NaviGpsACC = 0; |
||
| 214 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 215 | EE_Parameter.NaviStickThreshold = 8; |
||
| 216 | EE_Parameter.NaviWindCorrection = 90; |
||
| 217 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 218 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 219 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 220 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 221 | EE_Parameter.Receiver = RECEIVER_SPEKTRUM; |
||
| 222 | memcpy(EE_Parameter.Name, "Sport\0", 12); |
||
| 223 | EE_Parameter.crc = RAM_Checksum((uint8_t*)(&EE_Parameter), sizeof(EE_Parameter)-1); |
||
| 395 | hbuss | 224 | } |
| 1622 | killagreg | 225 | |
| 226 | |||
| 227 | /***************************************************/ |
||
| 228 | /* Default Values for parameter set 2 */ |
||
| 229 | /***************************************************/ |
||
| 230 | void ParamSet_DefaultSet2(void) // normal |
||
| 231 | { |
||
| 232 | EE_Parameter.Revision = EEPARAM_REVISION; |
||
| 233 | |||
| 234 | if(PlatinenVersion >= 20) |
||
| 235 | { |
||
| 236 | EE_Parameter.Gyro_D = 5; |
||
| 237 | EE_Parameter.Driftkomp = 0; |
||
| 238 | EE_Parameter.GyroAccFaktor = 27; |
||
| 239 | EE_Parameter.WinkelUmschlagNick = 78; |
||
| 240 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
| 241 | } |
||
| 242 | else |
||
| 243 | { |
||
| 244 | EE_Parameter.Gyro_D = 3; |
||
| 245 | EE_Parameter.Driftkomp = 32; |
||
| 246 | EE_Parameter.GyroAccFaktor = 30; |
||
| 247 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 248 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 249 | } |
||
| 250 | EE_Parameter.GlobalConfig = CFG_ACHSENKOPPLUNG_AKTIV | CFG_KOMPASS_AKTIV | CFG_GPS_AKTIV | CFG_HOEHEN_SCHALTER; |
||
| 251 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT;// | CFG2_VARIO_BEEP | CFG_SENSITIVE_RC |
||
| 252 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 253 | EE_Parameter.MaxHoehe = 255; // Wert : 0-247 255 -> Poti1 |
||
| 254 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 255 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-247 |
||
| 256 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-247 |
||
| 257 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-247 |
||
| 258 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-247 |
||
| 259 | EE_Parameter.Hoehe_StickNeutralPoint = 0;// Wert : 0-247 (0 = Hover-Estimation) |
||
| 260 | EE_Parameter.Hoehe_Verstaerkung = 15; // Wert : 0-50 |
||
| 261 | EE_Parameter.Stick_P = 10; // Wert : 1-6 |
||
| 262 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 263 | EE_Parameter.Gier_P = 6; // Wert : 1-20 |
||
| 264 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 265 | EE_Parameter.Gas_Max = 230; // Wert : 33-247 |
||
| 266 | EE_Parameter.KompassWirkung = 128; // Wert : 0-247 |
||
| 267 | EE_Parameter.Gyro_P = 90; // Wert : 0-247 |
||
| 268 | EE_Parameter.Gyro_I = 120; // Wert : 0-247 |
||
| 269 | EE_Parameter.Gyro_Gier_P = 90; // Wert : 0-247 |
||
| 270 | EE_Parameter.Gyro_Gier_I = 120; // Wert : 0-247 |
||
| 271 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-247 ( Automatische Zellenerkennung bei < 50) |
||
| 272 | EE_Parameter.NotGas = 35; // Wert : 0-247 // Gaswert bei Empangsverlust |
||
| 1652 | holgerb | 273 | EE_Parameter.NotGasZeit = 60; // Wert : 0-247 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
| 1622 | killagreg | 274 | EE_Parameter.I_Faktor = 32; |
| 275 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 276 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 277 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 278 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 279 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 280 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 281 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 282 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 283 | EE_Parameter.ServoNickControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 284 | EE_Parameter.ServoNickComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 285 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-247 // Richtung Einfluss Gyro/Servo |
||
| 286 | EE_Parameter.ServoNickMin = 0; // Wert : 0-247 // Anschlag |
||
| 287 | EE_Parameter.ServoNickMax = 247; // Wert : 0-247 // Anschlag |
||
| 288 | EE_Parameter.ServoNickRefresh = 6; |
||
| 289 | EE_Parameter.Servo3 = 125; |
||
| 290 | EE_Parameter.Servo4 = 125; |
||
| 291 | EE_Parameter.Servo5 = 125; |
||
| 292 | EE_Parameter.ServoRollControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 293 | EE_Parameter.ServoRollComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 294 | EE_Parameter.ServoRollMin = 0; // Wert : 0-247 // Anschlag |
||
| 295 | EE_Parameter.ServoRollMax = 247; // Wert : 0-247 // Anschlag |
||
| 296 | EE_Parameter.LoopGasLimit = 50; |
||
| 297 | EE_Parameter.LoopThreshold = 90; // Wert: 0-247 Schwelle für Stickausschlag |
||
| 298 | EE_Parameter.LoopHysterese = 50; |
||
| 299 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 300 | EE_Parameter.AchsKopplung1 = 90; |
||
| 301 | EE_Parameter.AchsKopplung2 = 80; |
||
| 302 | EE_Parameter.CouplingYawCorrection = 60; |
||
| 303 | EE_Parameter.GyroAccAbgleich = 32; // 1/k |
||
| 304 | EE_Parameter.DynamicStability = 75; |
||
| 305 | EE_Parameter.J16Bitmask = 95; |
||
| 306 | EE_Parameter.J17Bitmask = 243; |
||
| 307 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 308 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 309 | EE_Parameter.J16Timing = 20; |
||
| 310 | EE_Parameter.J17Timing = 20; |
||
| 311 | EE_Parameter.NaviGpsModeControl = 254; // 254 -> Poti 2 |
||
| 312 | EE_Parameter.NaviGpsGain = 100; |
||
| 313 | EE_Parameter.NaviGpsP = 90; |
||
| 314 | EE_Parameter.NaviGpsI = 90; |
||
| 315 | EE_Parameter.NaviGpsD = 90; |
||
| 316 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 317 | EE_Parameter.NaviGpsILimit = 75; |
||
| 318 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 319 | EE_Parameter.NaviGpsACC = 0; |
||
| 320 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 321 | EE_Parameter.NaviStickThreshold = 8; |
||
| 322 | EE_Parameter.NaviWindCorrection = 90; |
||
| 323 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 324 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 325 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 326 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 327 | EE_Parameter.Receiver = RECEIVER_SPEKTRUM; |
||
| 328 | memcpy(EE_Parameter.Name, "Normal\0", 12); |
||
| 329 | EE_Parameter.crc = RAM_Checksum((uint8_t*)(&EE_Parameter), sizeof(EE_Parameter)-1); |
||
| 330 | } |
||
| 331 | |||
| 332 | |||
| 333 | /***************************************************/ |
||
| 334 | /* Default Values for parameter set 3 */ |
||
| 335 | /***************************************************/ |
||
| 336 | void ParamSet_DefaultSet3(void) // beginner |
||
| 337 | { |
||
| 338 | EE_Parameter.Revision = EEPARAM_REVISION; |
||
| 339 | if(PlatinenVersion >= 20) |
||
| 340 | { |
||
| 341 | EE_Parameter.Gyro_D = 5; |
||
| 342 | EE_Parameter.Driftkomp = 0; |
||
| 343 | EE_Parameter.GyroAccFaktor = 27; |
||
| 344 | EE_Parameter.WinkelUmschlagNick = 78; |
||
| 345 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
| 346 | } |
||
| 347 | else |
||
| 348 | { |
||
| 349 | EE_Parameter.Gyro_D = 3; |
||
| 350 | EE_Parameter.Driftkomp = 32; |
||
| 351 | EE_Parameter.GyroAccFaktor = 30; |
||
| 352 | EE_Parameter.WinkelUmschlagNick = 85; |
||
| 353 | EE_Parameter.WinkelUmschlagRoll = 85; |
||
| 354 | } |
||
| 355 | EE_Parameter.GlobalConfig = /*CFG_DREHRATEN_BEGRENZER |*/ CFG_ACHSENKOPPLUNG_AKTIV | CFG_KOMPASS_AKTIV | CFG_GPS_AKTIV | CFG_HOEHEN_SCHALTER; |
||
| 356 | EE_Parameter.ExtraConfig = CFG2_HEIGHT_LIMIT;// | CFG2_VARIO_BEEP | CFG_SENSITIVE_RC |
||
| 357 | EE_Parameter.Hoehe_MinGas = 30; |
||
| 358 | EE_Parameter.MaxHoehe = 255; // Wert : 0-247 255 -> Poti1 |
||
| 359 | EE_Parameter.Hoehe_P = 10; // Wert : 0-32 |
||
| 360 | EE_Parameter.Luftdruck_D = 30; // Wert : 0-247 |
||
| 361 | EE_Parameter.Hoehe_ACC_Wirkung = 30; // Wert : 0-247 |
||
| 362 | EE_Parameter.Hoehe_HoverBand = 5; // Wert : 0-247 |
||
| 363 | EE_Parameter.Hoehe_GPS_Z = 64; // Wert : 0-247 |
||
| 364 | EE_Parameter.Hoehe_StickNeutralPoint = 0;// Wert : 0-247 (0 = Hover-Estimation) |
||
| 365 | EE_Parameter.Hoehe_Verstaerkung = 15; // Wert : 0-50 |
||
| 366 | EE_Parameter.Stick_P = 8; // Wert : 1-6 |
||
| 367 | EE_Parameter.Stick_D = 16; // Wert : 0-64 |
||
| 368 | EE_Parameter.Gier_P = 6; // Wert : 1-20 |
||
| 369 | EE_Parameter.Gas_Min = 8; // Wert : 0-32 |
||
| 370 | EE_Parameter.Gas_Max = 230; // Wert : 33-247 |
||
| 371 | EE_Parameter.KompassWirkung = 128; // Wert : 0-247 |
||
| 372 | EE_Parameter.Gyro_P = 100; // Wert : 0-247 |
||
| 373 | EE_Parameter.Gyro_I = 120; // Wert : 0-247 |
||
| 374 | EE_Parameter.Gyro_Gier_P = 100; // Wert : 0-247 |
||
| 375 | EE_Parameter.Gyro_Gier_I = 120; // Wert : 0-247 |
||
| 376 | EE_Parameter.UnterspannungsWarnung = 33; // Wert : 0-247 ( Automatische Zellenerkennung bei < 50) |
||
| 377 | EE_Parameter.NotGas = 35; // Wert : 0-247 // Gaswert bei Empangsverlust |
||
| 1652 | holgerb | 378 | EE_Parameter.NotGasZeit = 60; // Wert : 0-247 // Zeit bis auf NotGas geschaltet wird, wg. Rx-Problemen |
| 1622 | killagreg | 379 | EE_Parameter.I_Faktor = 16; |
| 380 | EE_Parameter.UserParam1 = 0; // zur freien Verwendung |
||
| 381 | EE_Parameter.UserParam2 = 0; // zur freien Verwendung |
||
| 382 | EE_Parameter.UserParam3 = 0; // zur freien Verwendung |
||
| 383 | EE_Parameter.UserParam4 = 0; // zur freien Verwendung |
||
| 384 | EE_Parameter.UserParam5 = 0; // zur freien Verwendung |
||
| 385 | EE_Parameter.UserParam6 = 0; // zur freien Verwendung |
||
| 386 | EE_Parameter.UserParam7 = 0; // zur freien Verwendung |
||
| 387 | EE_Parameter.UserParam8 = 0; // zur freien Verwendung |
||
| 388 | EE_Parameter.ServoNickControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 389 | EE_Parameter.ServoNickComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 390 | EE_Parameter.ServoCompInvert = 1; // Wert : 0-247 // Richtung Einfluss Gyro/Servo |
||
| 391 | EE_Parameter.ServoNickMin = 0; // Wert : 0-247 // Anschlag |
||
| 392 | EE_Parameter.ServoNickMax = 247; // Wert : 0-247 // Anschlag |
||
| 393 | EE_Parameter.ServoNickRefresh = 6; |
||
| 394 | EE_Parameter.Servo3 = 125; |
||
| 395 | EE_Parameter.Servo4 = 125; |
||
| 396 | EE_Parameter.Servo5 = 125; |
||
| 397 | EE_Parameter.ServoRollControl = 100; // Wert : 0-247 // Stellung des Servos |
||
| 398 | EE_Parameter.ServoRollComp = 40; // Wert : 0-247 // Einfluss Gyro/Servo |
||
| 399 | EE_Parameter.ServoRollMin = 0; // Wert : 0-247 // Anschlag |
||
| 400 | EE_Parameter.ServoRollMax = 247; // Wert : 0-247 // Anschlag |
||
| 401 | EE_Parameter.LoopGasLimit = 50; |
||
| 402 | EE_Parameter.LoopThreshold = 90; // Wert: 0-247 Schwelle für Stickausschlag |
||
| 403 | EE_Parameter.LoopHysterese = 50; |
||
| 404 | EE_Parameter.BitConfig = 0; // Bitcodiert: 0x01=oben, 0x02=unten, 0x04=links, 0x08=rechts |
||
| 405 | EE_Parameter.AchsKopplung1 = 90; |
||
| 406 | EE_Parameter.AchsKopplung2 = 80; |
||
| 407 | EE_Parameter.CouplingYawCorrection = 70; |
||
| 408 | EE_Parameter.GyroAccAbgleich = 32; // 1/k |
||
| 409 | EE_Parameter.DynamicStability = 50; |
||
| 410 | EE_Parameter.J16Bitmask = 95; |
||
| 411 | EE_Parameter.J17Bitmask = 243; |
||
| 412 | EE_Parameter.WARN_J16_Bitmask = 0xAA; |
||
| 413 | EE_Parameter.WARN_J17_Bitmask = 0xAA; |
||
| 414 | EE_Parameter.J16Timing = 30; |
||
| 415 | EE_Parameter.J17Timing = 30; |
||
| 416 | EE_Parameter.NaviGpsModeControl = 254; // 254 -> Poti 2 |
||
| 417 | EE_Parameter.NaviGpsGain = 100; |
||
| 418 | EE_Parameter.NaviGpsP = 90; |
||
| 419 | EE_Parameter.NaviGpsI = 90; |
||
| 420 | EE_Parameter.NaviGpsD = 90; |
||
| 421 | EE_Parameter.NaviGpsPLimit = 75; |
||
| 422 | EE_Parameter.NaviGpsILimit = 75; |
||
| 423 | EE_Parameter.NaviGpsDLimit = 75; |
||
| 424 | EE_Parameter.NaviGpsACC = 0; |
||
| 425 | EE_Parameter.NaviGpsMinSat = 6; |
||
| 426 | EE_Parameter.NaviStickThreshold = 8; |
||
| 427 | EE_Parameter.NaviWindCorrection = 90; |
||
| 428 | EE_Parameter.NaviSpeedCompensation = 30; |
||
| 429 | EE_Parameter.NaviOperatingRadius = 100; |
||
| 430 | EE_Parameter.NaviAngleLimitation = 100; |
||
| 431 | EE_Parameter.NaviPH_LoginTime = 4; |
||
| 432 | EE_Parameter.Receiver = RECEIVER_SPEKTRUM; |
||
| 433 | memcpy(EE_Parameter.Name, "Beginner\0", 12); |
||
| 434 | EE_Parameter.crc = RAM_Checksum((uint8_t*)(&EE_Parameter), sizeof(EE_Parameter)-1); |
||
| 435 | } |
||
| 436 | |||
| 437 | /***************************************************/ |
||
| 438 | /* Read Parameter from EEPROM as byte */ |
||
| 439 | /***************************************************/ |
||
| 440 | uint8_t GetParamByte(uint16_t param_id) |
||
| 441 | { |
||
| 442 | return eeprom_read_byte((uint8_t*)(EEPROM_ADR_PARAM_BEGIN + param_id)); |
||
| 443 | } |
||
| 444 | |||
| 445 | /***************************************************/ |
||
| 446 | /* Write Parameter to EEPROM as byte */ |
||
| 447 | /***************************************************/ |
||
| 448 | void SetParamByte(uint16_t param_id, uint8_t value) |
||
| 449 | { |
||
| 450 | eeprom_write_byte((uint8_t*)(EEPROM_ADR_PARAM_BEGIN + param_id), value); |
||
| 451 | } |
||
| 452 | |||
| 453 | /***************************************************/ |
||
| 454 | /* Read Parameter from EEPROM as word */ |
||
| 455 | /***************************************************/ |
||
| 456 | uint16_t GetParamWord(uint16_t param_id) |
||
| 457 | { |
||
| 458 | return eeprom_read_word((uint16_t *)(EEPROM_ADR_PARAM_BEGIN + param_id)); |
||
| 459 | } |
||
| 460 | |||
| 461 | /***************************************************/ |
||
| 462 | /* Write Parameter to EEPROM as word */ |
||
| 463 | /***************************************************/ |
||
| 464 | void SetParamWord(uint16_t param_id, uint16_t value) |
||
| 465 | { |
||
| 466 | eeprom_write_word((uint16_t*)(EEPROM_ADR_PARAM_BEGIN + param_id), value); |
||
| 467 | } |
||
| 468 | |||
| 469 | /***************************************************/ |
||
| 470 | /* Read Parameter Set from EEPROM */ |
||
| 471 | /***************************************************/ |
||
| 472 | // number [1..5] |
||
| 473 | uint8_t ParamSet_ReadFromEEProm(uint8_t setnumber) |
||
| 474 | { |
||
| 475 | uint8_t crc; |
||
| 476 | uint16_t eeaddr; |
||
| 477 | |||
| 478 | // range the setnumber |
||
| 479 | if((1 > setnumber) || (setnumber > 5)) setnumber = 3; |
||
| 480 | |||
| 481 | // calculate eeprom addr |
||
| 482 | eeaddr = EEPROM_ADR_PARAMSET + PARAMSET_STRUCT_LEN * (setnumber - 1); |
||
| 483 | |||
| 484 | // calculate checksum from eeprom |
||
| 485 | crc = EEProm_Checksum(eeaddr, PARAMSET_STRUCT_LEN - 1); |
||
| 486 | |||
| 487 | // check crc |
||
| 488 | if(crc != eeprom_read_byte((uint8_t*)(eeaddr + PARAMSET_STRUCT_LEN - 1))) return 0; |
||
| 489 | |||
| 490 | // check revision |
||
| 491 | if(eeprom_read_byte((uint8_t*)(eeaddr)) != EEPARAM_REVISION) return 0; |
||
| 492 | |||
| 493 | // read paramset from eeprom |
||
| 494 | eeprom_read_block((void *) &EE_Parameter, (void*)(EEPROM_ADR_PARAMSET + PARAMSET_STRUCT_LEN * (setnumber - 1)), PARAMSET_STRUCT_LEN); |
||
| 495 | LED_Init(); |
||
| 496 | return 1; |
||
| 497 | } |
||
| 498 | |||
| 499 | /***************************************************/ |
||
| 500 | /* Write Parameter Set to EEPROM */ |
||
| 501 | /***************************************************/ |
||
| 502 | // number [1..5] |
||
| 503 | uint8_t ParamSet_WriteToEEProm(uint8_t setnumber) |
||
| 504 | { |
||
| 505 | uint8_t crc; |
||
| 506 | |||
| 507 | if(EE_Parameter.Revision == EEPARAM_REVISION) // write only the right revision to eeprom |
||
| 508 | { |
||
| 509 | if(setnumber > 5) setnumber = 5; |
||
| 510 | if(setnumber < 1) return 0; |
||
| 511 | |||
| 512 | // update checksum |
||
| 513 | EE_Parameter.crc = RAM_Checksum((uint8_t*)(&EE_Parameter), sizeof(EE_Parameter)-1); |
||
| 514 | |||
| 515 | // write paramset to eeprom |
||
| 516 | eeprom_write_block((void *) &EE_Parameter, (void*)(EEPROM_ADR_PARAMSET + PARAMSET_STRUCT_LEN * (setnumber - 1)), PARAMSET_STRUCT_LEN); |
||
| 517 | |||
| 518 | // backup channel settings to separate block in eeprom |
||
| 519 | eeprom_write_block( (void*)(EE_Parameter.Kanalbelegung), (void*)(EEPROM_ADR_CHANNELS), sizeof(EE_Parameter.Kanalbelegung)); |
||
| 520 | |||
| 521 | // write crc of channel block to eeprom |
||
| 522 | crc = RAM_Checksum((uint8_t*)(EE_Parameter.Kanalbelegung), sizeof(EE_Parameter.Kanalbelegung)); |
||
| 523 | eeprom_write_byte((uint8_t*)(EEPROM_ADR_CHANNELS + sizeof(EE_Parameter.Kanalbelegung)), crc); |
||
| 524 | |||
| 525 | // update active settings number |
||
| 526 | SetActiveParamSet(setnumber); |
||
| 527 | LED_Init(); |
||
| 528 | return 1; |
||
| 529 | } |
||
| 530 | // wrong revision |
||
| 531 | return 0; |
||
| 532 | } |
||
| 533 | |||
| 534 | /***************************************************/ |
||
| 535 | /* Read MixerTable from EEPROM */ |
||
| 536 | /***************************************************/ |
||
| 537 | uint8_t MixerTable_ReadFromEEProm(void) |
||
| 538 | { |
||
| 539 | uint8_t crc; |
||
| 540 | |||
| 541 | // calculate checksum in eeprom |
||
| 542 | crc = EEProm_Checksum(EEPROM_ADR_MIXERTABLE, sizeof(Mixer) - 1); |
||
| 543 | |||
| 544 | // check crc |
||
| 545 | if( crc != eeprom_read_byte((uint8_t*)(EEPROM_ADR_MIXERTABLE + sizeof(Mixer) - 1)) ) return 0; |
||
| 546 | |||
| 547 | // check revision |
||
| 548 | if(eeprom_read_byte((uint8_t*)(EEPROM_ADR_MIXERTABLE)) != EEMIXER_REVISION) return 0; |
||
| 549 | |||
| 550 | // read mixer table |
||
| 551 | eeprom_read_block((void *) &Mixer, (void*)(EEPROM_ADR_MIXERTABLE), sizeof(Mixer)); |
||
| 552 | return 1; |
||
| 553 | } |
||
| 554 | |||
| 555 | /***************************************************/ |
||
| 556 | /* Write Mixer Table to EEPROM */ |
||
| 557 | /***************************************************/ |
||
| 558 | uint8_t MixerTable_WriteToEEProm(void) |
||
| 559 | { |
||
| 560 | if(Mixer.Revision == EEMIXER_REVISION) |
||
| 561 | { |
||
| 562 | // update crc |
||
| 563 | Mixer.crc = RAM_Checksum((uint8_t*)(&Mixer), sizeof(Mixer) - 1); |
||
| 564 | |||
| 565 | // write to eeprom |
||
| 566 | eeprom_write_block((void *) &Mixer, (void*)(EEPROM_ADR_MIXERTABLE), sizeof(Mixer)); |
||
| 567 | return 1; |
||
| 568 | } |
||
| 569 | else return 0; |
||
| 570 | } |
||
| 571 | |||
| 572 | /***************************************************/ |
||
| 573 | /* Default Values for Mixer Table */ |
||
| 574 | /***************************************************/ |
||
| 575 | void MixerTable_Default(void) // Quadro |
||
| 576 | { |
||
| 577 | uint8_t i; |
||
| 578 | |||
| 579 | Mixer.Revision = EEMIXER_REVISION; |
||
| 580 | // clear mixer table |
||
| 581 | for(i = 0; i < 16; i++) |
||
| 582 | { |
||
| 583 | Mixer.Motor[i][MIX_GAS] = 0; |
||
| 584 | Mixer.Motor[i][MIX_NICK] = 0; |
||
| 585 | Mixer.Motor[i][MIX_ROLL] = 0; |
||
| 586 | Mixer.Motor[i][MIX_YAW] = 0; |
||
| 587 | } |
||
| 588 | // default = Quadro |
||
| 589 | Mixer.Motor[0][MIX_GAS] = 64; Mixer.Motor[0][MIX_NICK] = +64; Mixer.Motor[0][MIX_ROLL] = 0; Mixer.Motor[0][MIX_YAW] = +64; |
||
| 590 | Mixer.Motor[1][MIX_GAS] = 64; Mixer.Motor[1][MIX_NICK] = -64; Mixer.Motor[1][MIX_ROLL] = 0; Mixer.Motor[1][MIX_YAW] = +64; |
||
| 591 | Mixer.Motor[2][MIX_GAS] = 64; Mixer.Motor[2][MIX_NICK] = 0; Mixer.Motor[2][MIX_ROLL] = -64; Mixer.Motor[2][MIX_YAW] = -64; |
||
| 592 | Mixer.Motor[3][MIX_GAS] = 64; Mixer.Motor[3][MIX_NICK] = 0; Mixer.Motor[3][MIX_ROLL] = +64; Mixer.Motor[3][MIX_YAW] = -64; |
||
| 593 | memcpy(Mixer.Name, "Quadro\0", 7); |
||
| 594 | Mixer.crc = Mixer.crc = RAM_Checksum((uint8_t*)(&Mixer), sizeof(Mixer) - 1); |
||
| 595 | } |
||
| 596 | |||
| 597 | |||
| 598 | /***************************************************/ |
||
| 599 | /* Get active parameter set */ |
||
| 600 | /***************************************************/ |
||
| 601 | uint8_t GetActiveParamSet(void) |
||
| 602 | { |
||
| 603 | uint8_t setnumber; |
||
| 604 | setnumber = eeprom_read_byte((uint8_t*)(EEPROM_ADR_PARAM_BEGIN + PID_ACTIVE_SET)); |
||
| 605 | if(setnumber > 5) |
||
| 606 | { |
||
| 607 | setnumber = 3; |
||
| 608 | eeprom_write_byte((void*)(EEPROM_ADR_PARAM_BEGIN+PID_ACTIVE_SET), setnumber); |
||
| 609 | } |
||
| 610 | return(setnumber); |
||
| 611 | } |
||
| 612 | |||
| 613 | /***************************************************/ |
||
| 614 | /* Set active parameter set */ |
||
| 615 | /***************************************************/ |
||
| 616 | void SetActiveParamSet(uint8_t setnumber) |
||
| 617 | { |
||
| 618 | if(setnumber > 5) setnumber = 5; |
||
| 619 | if(setnumber < 1) setnumber = 1; |
||
| 620 | eeprom_write_byte((uint8_t*)(EEPROM_ADR_PARAM_BEGIN + PID_ACTIVE_SET), setnumber); |
||
| 621 | } |
||
| 622 | |||
| 623 | /***************************************************/ |
||
| 624 | /* Initialize EEPROM Parameter Sets */ |
||
| 625 | /***************************************************/ |
||
| 626 | void ParamSet_Init(void) |
||
| 627 | { |
||
| 628 | uint8_t channel_backup = 0, bad_params = 0, ee_default = 0,i; |
||
| 629 | |||
| 630 | |||
| 631 | if(EEPARAM_REVISION != GetParamByte(PID_EE_REVISION) ) |
||
| 632 | { |
||
| 633 | ee_default = 1; // software update or forced by mktool |
||
| 634 | SetParamByte(PID_EE_REVISION, EEPARAM_REVISION); |
||
| 635 | } |
||
| 636 | |||
| 637 | |||
| 638 | // 1st check for a valid channel backup in eeprom |
||
| 639 | i = EEProm_Checksum(EEPROM_ADR_CHANNELS, sizeof(EE_Parameter.Kanalbelegung)); |
||
| 640 | if(i == eeprom_read_byte((uint8_t*)(EEPROM_ADR_CHANNELS + sizeof(EE_Parameter.Kanalbelegung))) ) channel_backup = 1; |
||
| 641 | |||
| 642 | |||
| 643 | // parameter check |
||
| 644 | |||
| 645 | // check all 5 parameter settings |
||
| 646 | for (i = 1;i < 6; i++) |
||
| 647 | { |
||
| 648 | if(ee_default || !ParamSet_ReadFromEEProm(i)) // could not read paramset from eeprom |
||
| 649 | { |
||
| 650 | bad_params = 1; |
||
| 651 | printf("\n\rGenerating default Parameter Set %d",i); |
||
| 652 | switch(i) |
||
| 653 | { |
||
| 654 | case 1: |
||
| 655 | ParamSet_DefaultSet1(); // Fill ParamSet Structure to default parameter set 1 (Sport) |
||
| 656 | break; |
||
| 657 | case 2: |
||
| 658 | ParamSet_DefaultSet2(); // Kamera |
||
| 659 | break; |
||
| 660 | case 3: |
||
| 661 | ParamSet_DefaultSet3(); // Beginner |
||
| 662 | break; |
||
| 663 | default: |
||
| 664 | ParamSet_DefaultSet2(); // Kamera |
||
| 665 | break; |
||
| 666 | } |
||
| 667 | if(channel_backup) // if we have an channel mapping backup in eeprom |
||
| 668 | { // restore it from eeprom |
||
| 669 | eeprom_read_block((void *)EE_Parameter.Kanalbelegung, (void*)(EEPROM_ADR_CHANNELS), sizeof(EE_Parameter.Kanalbelegung)); |
||
| 670 | } |
||
| 671 | else |
||
| 672 | { // use default mapping |
||
| 673 | ParamSet_DefaultStickMapping(); |
||
| 674 | } |
||
| 675 | ParamSet_WriteToEEProm(i); |
||
| 676 | } |
||
| 677 | } |
||
| 678 | if(bad_params) // at least one of the parameter settings were invalid |
||
| 679 | { |
||
| 680 | // default-Setting is parameter set 3 |
||
| 681 | SetActiveParamSet(3); |
||
| 682 | } |
||
| 683 | |||
| 684 | |||
| 685 | // read active parameter set to ParamSet stucture |
||
| 686 | i = GetActiveParamSet(); |
||
| 687 | ParamSet_ReadFromEEProm(i); |
||
| 688 | printf("\n\rUsing Parameter Set %d", i); |
||
| 689 | |||
| 690 | // load mixer table |
||
| 691 | if(ee_default || !MixerTable_ReadFromEEProm() ) |
||
| 692 | { |
||
| 693 | printf("\n\rGenerating default Mixer Table"); |
||
| 694 | MixerTable_Default(); // Quadro |
||
| 695 | MixerTable_WriteToEEProm(); |
||
| 696 | } |
||
| 697 | // determine motornumber |
||
| 698 | RequiredMotors = 0; |
||
| 699 | for(i = 0; i < 16; i++) |
||
| 700 | { |
||
| 701 | if(Mixer.Motor[i][MIX_GAS] > 0) RequiredMotors++; |
||
| 702 | } |
||
| 703 | |||
| 704 | printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name, RequiredMotors); |
||
| 705 | printf("\n\r=============================="); |
||
| 706 | } |