Rev 1420 | Rev 1424 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1338 | ingob | 2 | // + Copyright (c) Holger Buss, Ingo Busker |
3 | // + Nur für den privaten Gebrauch / NON-COMMERCIAL USE ONLY |
||
1 | ingob | 4 | // + www.MikroKopter.com |
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
||
8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1 | ingob | 10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
1 | ingob | 14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
21 | // + Benutzung auf eigene Gefahr |
||
22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1338 | ingob | 24 | // + Die Portierung oder Nutzung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
1 | ingob | 25 | // + mit unserer Zustimmung zulässig |
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
1 | ingob | 30 | // + this list of conditions and the following disclaimer. |
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
1051 | killagreg | 33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
1 | ingob | 34 | // + for non-commercial use (directly or indirectly) |
1051 | killagreg | 35 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1 | ingob | 36 | // + with our written permission |
1051 | killagreg | 37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
38 | // + clearly linked as origin |
||
1338 | ingob | 39 | // + * porting the sources to other systems or using the software on other systems (except hardware from www.mikrokopter.de) is not allowed |
1 | ingob | 40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
1051 | killagreg | 50 | // + POSSIBILITY OF SUCH DAMAGE. |
1 | ingob | 51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
52 | #include "main.h" |
||
53 | |||
54 | unsigned char EEPromArray[E2END+1] EEMEM; |
||
173 | holgerb | 55 | unsigned char PlatinenVersion = 10; |
723 | hbuss | 56 | unsigned char SendVersionToNavi = 1; |
1232 | hbuss | 57 | unsigned char BattLowVoltageWarning = 94; |
1298 | hbuss | 58 | unsigned int FlugMinuten = 0,FlugMinutenGesamt = 0; |
1 | ingob | 59 | // -- Parametersatz aus EEPROM lesen --- |
1051 | killagreg | 60 | // number [1..5] |
1 | ingob | 61 | void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
62 | { |
||
993 | hbuss | 63 | if((number > 5)||(number < 1)) number = 3; |
1063 | killagreg | 64 | eeprom_read_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); |
921 | hbuss | 65 | LED_Init(); |
1 | ingob | 66 | } |
67 | |||
68 | // -- Parametersatz ins EEPROM schreiben --- |
||
1051 | killagreg | 69 | // number [1..5] |
1 | ingob | 70 | void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
71 | { |
||
1051 | killagreg | 72 | if(number > 5) number = 5; |
993 | hbuss | 73 | if(number < 1) return; |
1063 | killagreg | 74 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); |
1171 | hbuss | 75 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_LENGTH], length); // Länge der Datensätze merken |
1377 | hbuss | 76 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_CHANNELS], 12); // 12 Kanäle merken |
1063 | killagreg | 77 | SetActiveParamSetNumber(number); |
921 | hbuss | 78 | LED_Init(); |
1 | ingob | 79 | } |
80 | |||
81 | unsigned char GetActiveParamSetNumber(void) |
||
82 | { |
||
1063 | killagreg | 83 | unsigned char set; |
84 | set = eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET]); |
||
85 | if((set > 5) || (set < 1)) |
||
86 | { |
||
87 | set = 3; |
||
88 | SetActiveParamSetNumber(set); // diesen Parametersatz als aktuell merken |
||
89 | } |
||
90 | return(set); |
||
1 | ingob | 91 | } |
92 | |||
1063 | killagreg | 93 | void SetActiveParamSetNumber(unsigned char number) |
94 | { |
||
95 | if(number > 5) number = 5; |
||
96 | if(number < 1) return; |
||
97 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz als aktuell merken |
||
98 | } |
||
99 | |||
100 | |||
819 | hbuss | 101 | void CalMk3Mag(void) |
102 | { |
||
103 | static unsigned char stick = 1; |
||
104 | |||
105 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -20) stick = 0; |
||
106 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) && !stick) |
||
107 | { |
||
108 | stick = 1; |
||
109 | WinkelOut.CalcState++; |
||
1051 | killagreg | 110 | if(WinkelOut.CalcState > 4) |
111 | { |
||
819 | hbuss | 112 | // WinkelOut.CalcState = 0; // in Uart.c |
113 | beeptime = 1000; |
||
1051 | killagreg | 114 | } |
1232 | hbuss | 115 | else Piep(WinkelOut.CalcState,150); |
819 | hbuss | 116 | } |
117 | DebugOut.Analog[19] = WinkelOut.CalcState; |
||
118 | } |
||
119 | |||
1268 | hbuss | 120 | void LipoDetection(unsigned char print) |
121 | { |
||
122 | unsigned int timer; |
||
123 | if(print) printf("\n\rBatt:"); |
||
124 | if(EE_Parameter.UnterspannungsWarnung < 50) // automatische Zellenerkennung |
||
125 | { |
||
126 | timer = SetDelay(500); |
||
127 | if(print) while (!CheckDelay(timer)); |
||
128 | if(UBat < 130) |
||
129 | { |
||
130 | BattLowVoltageWarning = 3 * EE_Parameter.UnterspannungsWarnung; |
||
1420 | killagreg | 131 | if(print) |
1268 | hbuss | 132 | { |
133 | Piep(3,200); |
||
134 | printf(" 3 Cells "); |
||
1420 | killagreg | 135 | } |
1268 | hbuss | 136 | } |
137 | else |
||
138 | { |
||
139 | BattLowVoltageWarning = 4 * EE_Parameter.UnterspannungsWarnung; |
||
1420 | killagreg | 140 | if(print) |
1268 | hbuss | 141 | { |
142 | Piep(4,200); |
||
143 | printf(" 4 Cells "); |
||
1420 | killagreg | 144 | } |
1268 | hbuss | 145 | } |
146 | } |
||
147 | else BattLowVoltageWarning = EE_Parameter.UnterspannungsWarnung; |
||
1374 | hbuss | 148 | // if(BattLowVoltageWarning < 93) BattLowVoltageWarning = 93; |
1268 | hbuss | 149 | if(print) printf(" Low warning level: %d.%d",BattLowVoltageWarning/10,BattLowVoltageWarning%10); |
150 | } |
||
151 | |||
1 | ingob | 152 | //############################################################################ |
153 | //Hauptprogramm |
||
154 | int main (void) |
||
155 | //############################################################################ |
||
156 | { |
||
1419 | ingob | 157 | unsigned int timer,i,timer2 = 0, timerJeti; |
1051 | killagreg | 158 | DDRB = 0x00; |
159 | PORTB = 0x00; |
||
188 | holgerb | 160 | for(timer = 0; timer < 1000; timer++); // verzögern |
1051 | killagreg | 161 | if(PINB & 0x01) |
918 | hbuss | 162 | { |
1051 | killagreg | 163 | if(PINB & 0x02) PlatinenVersion = 13; |
164 | else PlatinenVersion = 11; |
||
918 | hbuss | 165 | } |
1051 | killagreg | 166 | else |
1021 | hbuss | 167 | { |
1051 | killagreg | 168 | if(PINB & 0x02) PlatinenVersion = 20; |
169 | else PlatinenVersion = 10; |
||
1021 | hbuss | 170 | } |
171 | |||
173 | holgerb | 172 | DDRC = 0x81; // SCL |
1036 | hbuss | 173 | DDRC |=0x40; // HEF4017 Reset |
1 | ingob | 174 | PORTC = 0xff; // Pullup SDA |
175 | DDRB = 0x1B; // LEDs und Druckoffset |
||
176 | PORTB = 0x01; // LED_Rot |
||
177 | DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
||
1153 | hbuss | 178 | PORTD = 0x47; // LED |
1171 | hbuss | 179 | HEF4017R_ON; |
1 | ingob | 180 | MCUSR &=~(1<<WDRF); |
181 | WDTCSR |= (1<<WDCE)|(1<<WDE); |
||
182 | WDTCSR = 0; |
||
183 | |||
184 | beeptime = 2000; |
||
185 | StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
||
1111 | hbuss | 186 | if(PlatinenVersion >= 20) GIER_GRAD_FAKTOR = 1160; else GIER_GRAD_FAKTOR = 1291; // unterschiedlich für ME und ENC |
1 | ingob | 187 | ROT_OFF; |
1051 | killagreg | 188 | |
1 | ingob | 189 | Timer_Init(); |
1156 | hbuss | 190 | TIMER2_Init(); |
1 | ingob | 191 | UART_Init(); |
192 | rc_sum_init(); |
||
193 | ADC_Init(); |
||
194 | i2c_init(); |
||
597 | ingob | 195 | SPI_MasterInit(); |
1051 | killagreg | 196 | |
1419 | ingob | 197 | if(UCSR1A == 0x20 && UCSR1C == 0x06) // initial Values for 644P |
198 | { |
||
199 | //Uart1Init(); |
||
200 | JetiBoxUartInit(); |
||
201 | } |
||
202 | |||
1 | ingob | 203 | sei(); |
1211 | hbuss | 204 | printf("\n\r==================================="); |
1051 | killagreg | 205 | printf("\n\rFlightControl\n\rHardware:%d.%d\n\rSoftware:V%d.%d%c ",PlatinenVersion/10,PlatinenVersion%10, VERSION_MAJOR, VERSION_MINOR,VERSION_PATCH + 'a'); |
1344 | hbuss | 206 | printf("\n\rthe use of this software is only permitted \n\ron original MikroKopter-Hardware"); |
207 | printf("\n\rwww.MikroKopter.de (c) HiSystems GmbH"); |
||
208 | printf("\n\r==================================="); |
||
209 | |||
1 | ingob | 210 | GRN_ON; |
1377 | hbuss | 211 | ReadParameterSet(3, (unsigned char *) &EE_Parameter.Kanalbelegung[0], 13); // read only the first bytes |
1212 | hbuss | 212 | if((eeprom_read_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE]) == MIXER_REVISION) && // Check Revision in the first Byte |
213 | (eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != 0xff)) // Settings reset via Koptertool |
||
1209 | hbuss | 214 | { |
1254 | killagreg | 215 | unsigned char i; |
1209 | hbuss | 216 | RequiredMotors = 0; |
217 | eeprom_read_block(&Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
218 | for(i=0; i<16;i++) { if(Mixer.Motor[i][0] > 0) RequiredMotors++;} |
||
1254 | killagreg | 219 | } |
1209 | hbuss | 220 | else // default |
221 | { |
||
1254 | killagreg | 222 | unsigned char i; |
1211 | hbuss | 223 | printf("\n\rGenerating default Mixer Table"); |
1209 | hbuss | 224 | for(i=0; i<16;i++) { Mixer.Motor[i][0] = 0;Mixer.Motor[i][1] = 0;Mixer.Motor[i][2] = 0;Mixer.Motor[i][3] = 0;}; |
225 | // default = Quadro |
||
226 | Mixer.Motor[0][0] = 64; Mixer.Motor[0][1] = +64; Mixer.Motor[0][2] = 0; Mixer.Motor[0][3] = +64; |
||
227 | Mixer.Motor[1][0] = 64; Mixer.Motor[1][1] = -64; Mixer.Motor[1][2] = 0; Mixer.Motor[1][3] = +64; |
||
228 | Mixer.Motor[2][0] = 64; Mixer.Motor[2][1] = 0; Mixer.Motor[2][2] = -64; Mixer.Motor[2][3] = -64; |
||
229 | Mixer.Motor[3][0] = 64; Mixer.Motor[3][1] = 0; Mixer.Motor[3][2] = +64; Mixer.Motor[3][3] = -64; |
||
1211 | hbuss | 230 | Mixer.Revision = MIXER_REVISION; |
1254 | killagreg | 231 | memcpy(Mixer.Name, "Quadro\0", 11); |
1209 | hbuss | 232 | eeprom_write_block(&Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
233 | } |
||
234 | printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name,RequiredMotors); |
||
1211 | hbuss | 235 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
236 | // + Check connected BL-Ctrls |
||
237 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
238 | printf("\n\rFound BL-Ctrl: "); |
||
239 | motorread = 0; UpdateMotor = 0; SendMotorData(); while(!UpdateMotor); motorread = 0; // read the first I2C-Data |
||
1232 | hbuss | 240 | timer = SetDelay(2000); |
1420 | killagreg | 241 | |
242 | |||
1211 | hbuss | 243 | for(i=0; i < MAX_MOTORS; i++) |
244 | { |
||
245 | UpdateMotor = 0; |
||
246 | SendMotorData(); |
||
247 | while(!UpdateMotor); |
||
1232 | hbuss | 248 | if(Mixer.Motor[i][0] > 0) // wait max 2 sec for the BL-Ctrls to wake up |
249 | { |
||
250 | while(!CheckDelay(timer) && !MotorPresent[i]) {UpdateMotor = 0; SendMotorData(); while(!UpdateMotor);}; |
||
251 | } |
||
1211 | hbuss | 252 | if(MotorPresent[i]) printf("%d ",i+1); |
253 | } |
||
254 | for(i=0; i < MAX_MOTORS; i++) |
||
255 | { |
||
1420 | killagreg | 256 | if(!MotorPresent[i] && Mixer.Motor[i][0] > 0) |
1320 | hbuss | 257 | { |
258 | printf("\n\r\n\r!! MISSING BL-CTRL: %d !!",i+1); |
||
259 | ServoActive = 1; // just in case the FC would be used as camera-stabilizer |
||
1420 | killagreg | 260 | } |
1211 | hbuss | 261 | MotorError[i] = 0; |
262 | } |
||
1320 | hbuss | 263 | printf("\n\r==================================="); |
1356 | hbuss | 264 | SendMotorData(); |
1403 | hbuss | 265 | //printf("\n size: %u",STRUCT_PARAM_LAENGE); |
1320 | hbuss | 266 | |
1211 | hbuss | 267 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
268 | // + Check Settings |
||
269 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 270 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != EE_DATENREVISION) |
271 | { |
||
1 | ingob | 272 | DefaultKonstanten1(); |
1171 | hbuss | 273 | printf("\n\rInit. EEPROM"); |
1051 | killagreg | 274 | for (unsigned char i=1;i<6;i++) |
1 | ingob | 275 | { |
395 | hbuss | 276 | if(i==2) DefaultKonstanten2(); // Kamera |
277 | if(i==3) DefaultKonstanten3(); // Beginner |
||
278 | if(i>3) DefaultKonstanten2(); // Kamera |
||
1254 | killagreg | 279 | if(PlatinenVersion >= 20) |
280 | { |
||
1167 | hbuss | 281 | EE_Parameter.Gyro_D = 5; |
1111 | hbuss | 282 | EE_Parameter.Driftkomp = 0; |
283 | EE_Parameter.GyroAccFaktor = 27; |
||
284 | EE_Parameter.WinkelUmschlagNick = 78; |
||
285 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
286 | } |
||
1171 | hbuss | 287 | // valid Stick-Settings? |
288 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]) < 12) |
||
289 | { |
||
290 | EE_Parameter.Kanalbelegung[0] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]); |
||
291 | EE_Parameter.Kanalbelegung[1] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]); |
||
292 | EE_Parameter.Kanalbelegung[2] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]); |
||
293 | EE_Parameter.Kanalbelegung[3] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]); |
||
294 | EE_Parameter.Kanalbelegung[4] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+4]); |
||
295 | EE_Parameter.Kanalbelegung[5] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+5]); |
||
296 | EE_Parameter.Kanalbelegung[6] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+6]); |
||
297 | EE_Parameter.Kanalbelegung[7] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+7]); |
||
1420 | killagreg | 298 | |
1377 | hbuss | 299 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+8]) < 255) |
300 | { |
||
301 | EE_Parameter.Kanalbelegung[K_POTI5] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+8]); |
||
302 | EE_Parameter.Kanalbelegung[K_POTI6] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+9]); |
||
303 | EE_Parameter.Kanalbelegung[K_POTI7] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+10]); |
||
304 | EE_Parameter.Kanalbelegung[K_POTI8] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+11]); |
||
1420 | killagreg | 305 | } |
306 | else |
||
1377 | hbuss | 307 | { |
308 | EE_Parameter.Kanalbelegung[K_POTI5] = 9; |
||
309 | EE_Parameter.Kanalbelegung[K_POTI6] = 10; |
||
310 | EE_Parameter.Kanalbelegung[K_POTI7] = 11; |
||
311 | EE_Parameter.Kanalbelegung[K_POTI8] = 12; |
||
312 | } |
||
1171 | hbuss | 313 | if(i==1) printf(": Generating Default-Parameter using old Stick Settings"); |
314 | } else DefaultStickMapping(); |
||
1 | ingob | 315 | WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1051 | killagreg | 316 | } |
1063 | killagreg | 317 | SetActiveParamSetNumber(3); // default-Setting |
173 | holgerb | 318 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_VALID], EE_DATENREVISION); |
1 | ingob | 319 | } |
513 | hbuss | 320 | |
1298 | hbuss | 321 | FlugMinuten = (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_MINUTES2]) * 256 + (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_MINUTES2+1]); |
322 | FlugMinutenGesamt = (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_MINUTES]) * 256 + (int)eeprom_read_byte(&EEPromArray[EEPROM_ADR_MINUTES+1]); |
||
1350 | hbuss | 323 | if(FlugMinutenGesamt == 0xffff || FlugMinuten == 0xffff) |
1298 | hbuss | 324 | { |
325 | FlugMinuten = 0; |
||
326 | FlugMinutenGesamt = 0; |
||
327 | } |
||
328 | printf("\n\rFlight-time %u min Total:%u min" ,FlugMinuten,FlugMinutenGesamt); |
||
329 | |||
1051 | killagreg | 330 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK]) > 4) |
513 | hbuss | 331 | { |
1211 | hbuss | 332 | printf("\n\rACC not calibrated !"); |
513 | hbuss | 333 | } |
1051 | killagreg | 334 | |
1 | ingob | 335 | ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1211 | hbuss | 336 | printf("\n\rUsing parameterset %d", GetActiveParamSetNumber()); |
1 | ingob | 337 | |
1051 | killagreg | 338 | |
1 | ingob | 339 | if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
1051 | killagreg | 340 | { |
1211 | hbuss | 341 | printf("\n\rCalibrating pressure sensor.."); |
1051 | killagreg | 342 | timer = SetDelay(1000); |
1 | ingob | 343 | SucheLuftruckOffset(); |
344 | while (!CheckDelay(timer)); |
||
345 | printf("OK\n\r"); |
||
346 | } |
||
1051 | killagreg | 347 | |
1 | ingob | 348 | SetNeutral(); |
349 | |||
350 | ROT_OFF; |
||
1051 | killagreg | 351 | |
1 | ingob | 352 | beeptime = 2000; |
1051 | killagreg | 353 | ExternControl.Digital[0] = 0x55; |
1 | ingob | 354 | |
1051 | killagreg | 355 | |
1211 | hbuss | 356 | printf("\n\rControl: "); |
1 | ingob | 357 | if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
1211 | hbuss | 358 | else printf("Normal (ACC-Mode)"); |
1051 | killagreg | 359 | |
1 | ingob | 360 | LcdClear(); |
173 | holgerb | 361 | I2CTimeout = 5000; |
819 | hbuss | 362 | WinkelOut.Orientation = 1; |
1268 | hbuss | 363 | LipoDetection(1); |
1232 | hbuss | 364 | printf("\n\r===================================\n\r"); |
1320 | hbuss | 365 | //SpektrumBinding(); |
1350 | hbuss | 366 | timer = SetDelay(2000); |
1419 | ingob | 367 | timerJeti = SetDelay(250); |
1 | ingob | 368 | while (1) |
369 | { |
||
1420 | killagreg | 370 | |
1419 | ingob | 371 | if(CheckDelay(timerJeti)) |
372 | { |
||
373 | timerJeti = SetDelay(100); |
||
374 | JetiBoxPolling(); |
||
375 | } |
||
1420 | killagreg | 376 | |
1419 | ingob | 377 | if(UpdateMotor && AdReady) // ReglerIntervall |
1051 | killagreg | 378 | { |
1171 | hbuss | 379 | UpdateMotor=0; |
819 | hbuss | 380 | if(WinkelOut.CalcState) CalMk3Mag(); |
1051 | killagreg | 381 | else MotorRegler(); |
1 | ingob | 382 | SendMotorData(); |
383 | ROT_OFF; |
||
384 | if(SenderOkay) SenderOkay--; |
||
1309 | hbuss | 385 | else TIMSK1 |= _BV(ICIE1); // enable PPM-Input |
1420 | killagreg | 386 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1423 | hbuss | 387 | if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 160 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 220) SenderOkay = 160; |
388 | if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 101 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 1) SenderOkay = 101; |
||
1309 | hbuss | 389 | //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
1420 | killagreg | 390 | |
1210 | hbuss | 391 | if(!--I2CTimeout || MissingMotor) |
173 | holgerb | 392 | { |
1254 | killagreg | 393 | if(!I2CTimeout) |
1210 | hbuss | 394 | { |
395 | i2c_reset(); |
||
396 | I2CTimeout = 5; |
||
1322 | hbuss | 397 | DebugOut.Analog[28]++; // I2C-Error |
1423 | hbuss | 398 | FCFlags |= FCFLAG_I2CERR; |
1322 | hbuss | 399 | } |
1051 | killagreg | 400 | if((BeepMuster == 0xffff) && MotorenEin) |
401 | { |
||
173 | holgerb | 402 | beeptime = 10000; |
403 | BeepMuster = 0x0080; |
||
1051 | killagreg | 404 | } |
1 | ingob | 405 | } |
1051 | killagreg | 406 | else |
1 | ingob | 407 | { |
1051 | killagreg | 408 | ROT_OFF; |
1423 | hbuss | 409 | if(!beeptime) FCFlags &= ~FCFLAG_I2CERR; |
1 | ingob | 410 | } |
805 | hbuss | 411 | if(SIO_DEBUG && (!UpdateMotor || !MotorenEin)) |
1 | ingob | 412 | { |
413 | DatenUebertragung(); |
||
414 | BearbeiteRxDaten(); |
||
415 | } |
||
1254 | killagreg | 416 | else BearbeiteRxDaten(); |
417 | if(CheckDelay(timer)) |
||
418 | { |
||
1420 | killagreg | 419 | timer += 20; // 20 ms interval |
420 | if(PcZugriff) PcZugriff--; |
||
421 | else |
||
422 | { |
||
423 | ExternControl.Config = 0; |
||
424 | ExternStickNick = 0; |
||
425 | ExternStickRoll = 0; |
||
426 | ExternStickGier = 0; |
||
427 | if(BeepMuster == 0xffff && SenderOkay == 0) |
||
428 | { |
||
429 | beeptime = 15000; |
||
430 | BeepMuster = 0x0c00; |
||
431 | } |
||
432 | } |
||
433 | if(NaviDataOkay) |
||
434 | { |
||
435 | NaviDataOkay--; |
||
436 | FCFlags &= ~FCFLAG_SPI_RX_ERR; |
||
437 | } |
||
438 | else |
||
439 | { |
||
440 | GPS_Nick = 0; |
||
441 | GPS_Roll = 0; |
||
1423 | hbuss | 442 | if(!beeptime) FCFlags |= FCFLAG_SPI_RX_ERR; |
1420 | killagreg | 443 | } |
1309 | hbuss | 444 | if(UBat < BattLowVoltageWarning) |
1254 | killagreg | 445 | { |
1420 | killagreg | 446 | FCFlags |= FCFLAG_LOWBAT; |
1254 | killagreg | 447 | if(BeepMuster == 0xffff) |
448 | { |
||
449 | beeptime = 6000; |
||
450 | BeepMuster = 0x0300; |
||
451 | } |
||
452 | } |
||
1423 | hbuss | 453 | else if(!beeptime) FCFlags &= ~FCFLAG_LOWBAT; |
1420 | killagreg | 454 | |
1254 | killagreg | 455 | SPI_StartTransmitPacket(); |
456 | SendSPI = 4; |
||
1420 | killagreg | 457 | |
1320 | hbuss | 458 | if(!MotorenEin) timer2 = 1450; // 0,5 Minuten aufrunden |
1420 | killagreg | 459 | |
1320 | hbuss | 460 | if(++timer2 == 2930) // eine Minute |
1298 | hbuss | 461 | { |
462 | timer2 = 0; |
||
463 | FlugMinuten++; |
||
464 | FlugMinutenGesamt++; |
||
1420 | killagreg | 465 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_MINUTES2],FlugMinuten / 256); |
466 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_MINUTES2+1],FlugMinuten % 256); |
||
467 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_MINUTES],FlugMinutenGesamt / 256); |
||
468 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_MINUTES+1],FlugMinutenGesamt % 256); |
||
1344 | hbuss | 469 | timer = SetDelay(20); // falls "timer += 20;" mal nicht geht |
1298 | hbuss | 470 | } |
1254 | killagreg | 471 | } |
921 | hbuss | 472 | LED_Update(); |
604 | hbuss | 473 | } |
723 | hbuss | 474 | if(!SendSPI) { SPI_TransmitByte(); } |
1 | ingob | 475 | } |
476 | return (1); |
||
477 | } |
||
478 | |||
1219 | hbuss | 479 |