Rev 1215 | Rev 1232 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1 | ingob | 1 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
2 | // + Copyright (c) 04.2007 Holger Buss |
||
3 | // + Nur für den privaten Gebrauch |
||
4 | // + www.MikroKopter.com |
||
5 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 6 | // + Es gilt für das gesamte Projekt (Hardware, Software, Binärfiles, Sourcecode und Dokumentation), |
7 | // + dass eine Nutzung (auch auszugsweise) nur für den privaten und nicht-kommerziellen Gebrauch zulässig ist. |
||
8 | // + Sollten direkte oder indirekte kommerzielle Absichten verfolgt werden, ist mit uns (info@mikrokopter.de) Kontakt |
||
9 | // + bzgl. der Nutzungsbedingungen aufzunehmen. |
||
1 | ingob | 10 | // + Eine kommerzielle Nutzung ist z.B.Verkauf von MikroKoptern, Bestückung und Verkauf von Platinen oder Bausätzen, |
11 | // + Verkauf von Luftbildaufnahmen, usw. |
||
12 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 13 | // + Werden Teile des Quellcodes (mit oder ohne Modifikation) weiterverwendet oder veröffentlicht, |
1 | ingob | 14 | // + unterliegen sie auch diesen Nutzungsbedingungen und diese Nutzungsbedingungen incl. Copyright müssen dann beiliegen |
15 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
16 | // + Sollte die Software (auch auszugesweise) oder sonstige Informationen des MikroKopter-Projekts |
||
17 | // + auf anderen Webseiten oder Medien veröffentlicht werden, muss unsere Webseite "http://www.mikrokopter.de" |
||
18 | // + eindeutig als Ursprung verlinkt und genannt werden |
||
19 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
20 | // + Keine Gewähr auf Fehlerfreiheit, Vollständigkeit oder Funktion |
||
21 | // + Benutzung auf eigene Gefahr |
||
22 | // + Wir übernehmen keinerlei Haftung für direkte oder indirekte Personen- oder Sachschäden |
||
23 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 24 | // + Die Portierung der Software (oder Teile davon) auf andere Systeme (ausser der Hardware von www.mikrokopter.de) ist nur |
1 | ingob | 25 | // + mit unserer Zustimmung zulässig |
26 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
27 | // + Die Funktion printf_P() unterliegt ihrer eigenen Lizenz und ist hiervon nicht betroffen |
||
28 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 29 | // + Redistributions of source code (with or without modifications) must retain the above copyright notice, |
1 | ingob | 30 | // + this list of conditions and the following disclaimer. |
31 | // + * Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived |
||
32 | // + from this software without specific prior written permission. |
||
1051 | killagreg | 33 | // + * The use of this project (hardware, software, binary files, sources and documentation) is only permittet |
1 | ingob | 34 | // + for non-commercial use (directly or indirectly) |
1051 | killagreg | 35 | // + Commercial use (for excample: selling of MikroKopters, selling of PCBs, assembly, ...) is only permitted |
1 | ingob | 36 | // + with our written permission |
1051 | killagreg | 37 | // + * If sources or documentations are redistributet on other webpages, out webpage (http://www.MikroKopter.de) must be |
38 | // + clearly linked as origin |
||
1 | ingob | 39 | // + * porting to systems other than hardware from www.mikrokopter.de is not allowed |
40 | // + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||
41 | // + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||
42 | // + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
||
43 | // + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
||
44 | // + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
||
45 | // + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
||
46 | // + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
||
47 | // + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
||
48 | // + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
||
49 | // + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
||
1051 | killagreg | 50 | // + POSSIBILITY OF SUCH DAMAGE. |
1 | ingob | 51 | // ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
52 | #include "main.h" |
||
53 | |||
54 | unsigned char EEPromArray[E2END+1] EEMEM; |
||
173 | holgerb | 55 | unsigned char PlatinenVersion = 10; |
723 | hbuss | 56 | unsigned char SendVersionToNavi = 1; |
1 | ingob | 57 | // -- Parametersatz aus EEPROM lesen --- |
1051 | killagreg | 58 | // number [1..5] |
1 | ingob | 59 | void ReadParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
60 | { |
||
993 | hbuss | 61 | if((number > 5)||(number < 1)) number = 3; |
1063 | killagreg | 62 | eeprom_read_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); |
921 | hbuss | 63 | LED_Init(); |
1 | ingob | 64 | } |
65 | |||
66 | // -- Parametersatz ins EEPROM schreiben --- |
||
1051 | killagreg | 67 | // number [1..5] |
1 | ingob | 68 | void WriteParameterSet(unsigned char number, unsigned char *buffer, unsigned char length) |
69 | { |
||
1051 | killagreg | 70 | if(number > 5) number = 5; |
993 | hbuss | 71 | if(number < 1) return; |
1063 | killagreg | 72 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_PARAM_BEGIN + length * (number - 1)], length); |
1171 | hbuss | 73 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_PARAM_LENGTH], length); // Länge der Datensätze merken |
74 | eeprom_write_block(buffer, &EEPromArray[EEPROM_ADR_CHANNELS], 8); // 8 Kanäle merken |
||
1063 | killagreg | 75 | SetActiveParamSetNumber(number); |
921 | hbuss | 76 | LED_Init(); |
1 | ingob | 77 | } |
78 | |||
79 | unsigned char GetActiveParamSetNumber(void) |
||
80 | { |
||
1063 | killagreg | 81 | unsigned char set; |
82 | set = eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET]); |
||
83 | if((set > 5) || (set < 1)) |
||
84 | { |
||
85 | set = 3; |
||
86 | SetActiveParamSetNumber(set); // diesen Parametersatz als aktuell merken |
||
87 | } |
||
88 | return(set); |
||
1 | ingob | 89 | } |
90 | |||
1063 | killagreg | 91 | |
92 | void SetActiveParamSetNumber(unsigned char number) |
||
93 | { |
||
94 | if(number > 5) number = 5; |
||
95 | if(number < 1) return; |
||
96 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_ACTIVE_SET], number); // diesen Parametersatz als aktuell merken |
||
97 | } |
||
98 | |||
99 | |||
819 | hbuss | 100 | void CalMk3Mag(void) |
101 | { |
||
102 | static unsigned char stick = 1; |
||
103 | |||
104 | if(PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] > -20) stick = 0; |
||
105 | if((PPM_in[EE_Parameter.Kanalbelegung[K_NICK]] < -70) && !stick) |
||
106 | { |
||
107 | stick = 1; |
||
108 | WinkelOut.CalcState++; |
||
1051 | killagreg | 109 | if(WinkelOut.CalcState > 4) |
110 | { |
||
819 | hbuss | 111 | // WinkelOut.CalcState = 0; // in Uart.c |
112 | beeptime = 1000; |
||
1051 | killagreg | 113 | } |
819 | hbuss | 114 | else Piep(WinkelOut.CalcState); |
115 | } |
||
116 | DebugOut.Analog[19] = WinkelOut.CalcState; |
||
117 | } |
||
118 | |||
1 | ingob | 119 | //############################################################################ |
120 | //Hauptprogramm |
||
121 | int main (void) |
||
122 | //############################################################################ |
||
123 | { |
||
1211 | hbuss | 124 | unsigned int timer,i; |
1051 | killagreg | 125 | DDRB = 0x00; |
126 | PORTB = 0x00; |
||
188 | holgerb | 127 | for(timer = 0; timer < 1000; timer++); // verzögern |
1051 | killagreg | 128 | if(PINB & 0x01) |
918 | hbuss | 129 | { |
1051 | killagreg | 130 | if(PINB & 0x02) PlatinenVersion = 13; |
131 | else PlatinenVersion = 11; |
||
918 | hbuss | 132 | } |
1051 | killagreg | 133 | else |
1021 | hbuss | 134 | { |
1051 | killagreg | 135 | if(PINB & 0x02) PlatinenVersion = 20; |
136 | else PlatinenVersion = 10; |
||
1021 | hbuss | 137 | } |
138 | |||
173 | holgerb | 139 | DDRC = 0x81; // SCL |
1036 | hbuss | 140 | DDRC |=0x40; // HEF4017 Reset |
1 | ingob | 141 | PORTC = 0xff; // Pullup SDA |
142 | DDRB = 0x1B; // LEDs und Druckoffset |
||
143 | PORTB = 0x01; // LED_Rot |
||
144 | DDRD = 0x3E; // Speaker & TXD & J3 J4 J5 |
||
1036 | hbuss | 145 | DDRD |=0x80; // J7 -> Servo signal |
1153 | hbuss | 146 | PORTD = 0x47; // LED |
1171 | hbuss | 147 | HEF4017R_ON; |
1 | ingob | 148 | MCUSR &=~(1<<WDRF); |
149 | WDTCSR |= (1<<WDCE)|(1<<WDE); |
||
150 | WDTCSR = 0; |
||
151 | |||
152 | beeptime = 2000; |
||
153 | |||
154 | StickGier = 0; PPM_in[K_GAS] = 0;StickRoll = 0; StickNick = 0; |
||
1111 | hbuss | 155 | if(PlatinenVersion >= 20) GIER_GRAD_FAKTOR = 1160; else GIER_GRAD_FAKTOR = 1291; // unterschiedlich für ME und ENC |
1 | ingob | 156 | ROT_OFF; |
1051 | killagreg | 157 | |
1 | ingob | 158 | Timer_Init(); |
1156 | hbuss | 159 | TIMER2_Init(); |
1 | ingob | 160 | UART_Init(); |
161 | rc_sum_init(); |
||
162 | ADC_Init(); |
||
163 | i2c_init(); |
||
597 | ingob | 164 | SPI_MasterInit(); |
1051 | killagreg | 165 | |
1 | ingob | 166 | sei(); |
167 | |||
1211 | hbuss | 168 | printf("\n\r==================================="); |
1051 | killagreg | 169 | printf("\n\rFlightControl\n\rHardware:%d.%d\n\rSoftware:V%d.%d%c ",PlatinenVersion/10,PlatinenVersion%10, VERSION_MAJOR, VERSION_MINOR,VERSION_PATCH + 'a'); |
1172 | hbuss | 170 | if(UCSR1A == 0x20 && UCSR1C == 0x06) // initial Values for 644P |
171 | { |
||
172 | Uart1Init(); |
||
173 | } |
||
1 | ingob | 174 | GRN_ON; |
1063 | killagreg | 175 | ReadParameterSet(3, (unsigned char *) &EE_Parameter.Kanalbelegung[0], 9); // read only the first bytes |
1051 | killagreg | 176 | |
1212 | hbuss | 177 | if((eeprom_read_byte(&EEPromArray[EEPROM_ADR_MIXER_TABLE]) == MIXER_REVISION) && // Check Revision in the first Byte |
178 | (eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != 0xff)) // Settings reset via Koptertool |
||
1209 | hbuss | 179 | { |
180 | unsigned char i; |
||
181 | RequiredMotors = 0; |
||
182 | eeprom_read_block(&Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
183 | for(i=0; i<16;i++) { if(Mixer.Motor[i][0] > 0) RequiredMotors++;} |
||
184 | } |
||
185 | else // default |
||
186 | { |
||
187 | unsigned char i; |
||
1211 | hbuss | 188 | printf("\n\rGenerating default Mixer Table"); |
1209 | hbuss | 189 | for(i=0; i<16;i++) { Mixer.Motor[i][0] = 0;Mixer.Motor[i][1] = 0;Mixer.Motor[i][2] = 0;Mixer.Motor[i][3] = 0;}; |
190 | // default = Quadro |
||
191 | Mixer.Motor[0][0] = 64; Mixer.Motor[0][1] = +64; Mixer.Motor[0][2] = 0; Mixer.Motor[0][3] = +64; |
||
192 | Mixer.Motor[1][0] = 64; Mixer.Motor[1][1] = -64; Mixer.Motor[1][2] = 0; Mixer.Motor[1][3] = +64; |
||
193 | Mixer.Motor[2][0] = 64; Mixer.Motor[2][1] = 0; Mixer.Motor[2][2] = -64; Mixer.Motor[2][3] = -64; |
||
194 | Mixer.Motor[3][0] = 64; Mixer.Motor[3][1] = 0; Mixer.Motor[3][2] = +64; Mixer.Motor[3][3] = -64; |
||
1211 | hbuss | 195 | Mixer.Revision = MIXER_REVISION; |
1209 | hbuss | 196 | memcpy(Mixer.Name, "Quadro\0", 11); |
197 | eeprom_write_block(&Mixer, &EEPromArray[EEPROM_ADR_MIXER_TABLE], sizeof(Mixer)); |
||
198 | } |
||
199 | printf("\n\rMixer-Config: '%s' (%u Motors)",Mixer.Name,RequiredMotors); |
||
1211 | hbuss | 200 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
201 | // + Check connected BL-Ctrls |
||
202 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
203 | printf("\n\rFound BL-Ctrl: "); |
||
204 | motorread = 0; UpdateMotor = 0; SendMotorData(); while(!UpdateMotor); motorread = 0; // read the first I2C-Data |
||
205 | for(i=0; i < MAX_MOTORS; i++) |
||
206 | { |
||
207 | UpdateMotor = 0; |
||
208 | SendMotorData(); |
||
209 | while(!UpdateMotor); |
||
210 | if(MotorPresent[i]) printf("%d ",i+1); |
||
211 | } |
||
212 | for(i=0; i < MAX_MOTORS; i++) |
||
213 | { |
||
214 | if(!MotorPresent[i] && Mixer.Motor[i][0] > 0) printf("\n\r\n\r!! MISSING BL-CTRL: %d !!",i+1); |
||
215 | MotorError[i] = 0; |
||
216 | } |
||
217 | printf("\n\r==================================="); |
||
218 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
219 | // + Check Settings |
||
220 | // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
||
1051 | killagreg | 221 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_VALID]) != EE_DATENREVISION) |
222 | { |
||
1 | ingob | 223 | DefaultKonstanten1(); |
1171 | hbuss | 224 | printf("\n\rInit. EEPROM"); |
1051 | killagreg | 225 | for (unsigned char i=1;i<6;i++) |
1 | ingob | 226 | { |
395 | hbuss | 227 | if(i==2) DefaultKonstanten2(); // Kamera |
228 | if(i==3) DefaultKonstanten3(); // Beginner |
||
229 | if(i>3) DefaultKonstanten2(); // Kamera |
||
1111 | hbuss | 230 | if(PlatinenVersion >= 20) |
231 | { |
||
1167 | hbuss | 232 | EE_Parameter.Gyro_D = 5; |
1111 | hbuss | 233 | EE_Parameter.Driftkomp = 0; |
234 | EE_Parameter.GyroAccFaktor = 27; |
||
235 | EE_Parameter.WinkelUmschlagNick = 78; |
||
236 | EE_Parameter.WinkelUmschlagRoll = 78; |
||
237 | } |
||
1171 | hbuss | 238 | // valid Stick-Settings? |
239 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]) < 12 && eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]) < 12) |
||
240 | { |
||
241 | EE_Parameter.Kanalbelegung[0] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+0]); |
||
242 | EE_Parameter.Kanalbelegung[1] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+1]); |
||
243 | EE_Parameter.Kanalbelegung[2] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+2]); |
||
244 | EE_Parameter.Kanalbelegung[3] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+3]); |
||
245 | EE_Parameter.Kanalbelegung[4] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+4]); |
||
246 | EE_Parameter.Kanalbelegung[5] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+5]); |
||
247 | EE_Parameter.Kanalbelegung[6] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+6]); |
||
248 | EE_Parameter.Kanalbelegung[7] = eeprom_read_byte(&EEPromArray[EEPROM_ADR_CHANNELS+7]); |
||
249 | if(i==1) printf(": Generating Default-Parameter using old Stick Settings"); |
||
250 | } else DefaultStickMapping(); |
||
1 | ingob | 251 | WriteParameterSet(i, (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1051 | killagreg | 252 | } |
1063 | killagreg | 253 | SetActiveParamSetNumber(3); // default-Setting |
173 | holgerb | 254 | eeprom_write_byte(&EEPromArray[EEPROM_ADR_VALID], EE_DATENREVISION); |
1 | ingob | 255 | } |
513 | hbuss | 256 | |
1051 | killagreg | 257 | if(eeprom_read_byte(&EEPromArray[EEPROM_ADR_ACC_NICK]) > 4) |
513 | hbuss | 258 | { |
1211 | hbuss | 259 | printf("\n\rACC not calibrated !"); |
513 | hbuss | 260 | } |
1051 | killagreg | 261 | |
1 | ingob | 262 | ReadParameterSet(GetActiveParamSetNumber(), (unsigned char *) &EE_Parameter.Kanalbelegung[0], STRUCT_PARAM_LAENGE); |
1211 | hbuss | 263 | printf("\n\rUsing parameterset %d", GetActiveParamSetNumber()); |
1 | ingob | 264 | |
1051 | killagreg | 265 | |
1 | ingob | 266 | if(EE_Parameter.GlobalConfig & CFG_HOEHENREGELUNG) |
1051 | killagreg | 267 | { |
1211 | hbuss | 268 | printf("\n\rCalibrating pressure sensor.."); |
1051 | killagreg | 269 | timer = SetDelay(1000); |
1 | ingob | 270 | SucheLuftruckOffset(); |
271 | while (!CheckDelay(timer)); |
||
272 | printf("OK\n\r"); |
||
273 | } |
||
1051 | killagreg | 274 | |
1 | ingob | 275 | SetNeutral(); |
276 | |||
277 | ROT_OFF; |
||
1051 | killagreg | 278 | |
1 | ingob | 279 | beeptime = 2000; |
1051 | killagreg | 280 | ExternControl.Digital[0] = 0x55; |
1 | ingob | 281 | |
1051 | killagreg | 282 | |
1211 | hbuss | 283 | printf("\n\rControl: "); |
1 | ingob | 284 | if (EE_Parameter.GlobalConfig & CFG_HEADING_HOLD) printf("HeadingHold"); |
1211 | hbuss | 285 | else printf("Normal (ACC-Mode)"); |
1051 | killagreg | 286 | |
1211 | hbuss | 287 | printf("\n\r===================================\n\r"); |
1051 | killagreg | 288 | |
1 | ingob | 289 | LcdClear(); |
173 | holgerb | 290 | I2CTimeout = 5000; |
819 | hbuss | 291 | WinkelOut.Orientation = 1; |
1 | ingob | 292 | while (1) |
293 | { |
||
1155 | hbuss | 294 | if(UpdateMotor && AdReady) // ReglerIntervall |
1051 | killagreg | 295 | { |
1171 | hbuss | 296 | UpdateMotor=0; |
819 | hbuss | 297 | if(WinkelOut.CalcState) CalMk3Mag(); |
1051 | killagreg | 298 | else MotorRegler(); |
1 | ingob | 299 | SendMotorData(); |
300 | ROT_OFF; |
||
1051 | killagreg | 301 | if(PcZugriff) PcZugriff--; |
302 | else |
||
492 | hbuss | 303 | { |
595 | hbuss | 304 | ExternControl.Config = 0; |
492 | hbuss | 305 | ExternStickNick = 0; |
306 | ExternStickRoll = 0; |
||
307 | ExternStickGier = 0; |
||
308 | } |
||
1 | ingob | 309 | if(SenderOkay) SenderOkay--; |
1215 | hbuss | 310 | if(NaviDataOkay) |
311 | { |
||
312 | if(--NaviDataOkay == 0) |
||
313 | { |
||
314 | GPS_Nick = 0; |
||
315 | GPS_Roll = 0; |
||
316 | } |
||
317 | } |
||
1210 | hbuss | 318 | if(!--I2CTimeout || MissingMotor) |
173 | holgerb | 319 | { |
1210 | hbuss | 320 | if(!I2CTimeout) |
321 | { |
||
322 | i2c_reset(); |
||
323 | I2CTimeout = 5; |
||
324 | } |
||
1051 | killagreg | 325 | if((BeepMuster == 0xffff) && MotorenEin) |
326 | { |
||
173 | holgerb | 327 | beeptime = 10000; |
328 | BeepMuster = 0x0080; |
||
1051 | killagreg | 329 | } |
1 | ingob | 330 | } |
1051 | killagreg | 331 | else |
1 | ingob | 332 | { |
1051 | killagreg | 333 | ROT_OFF; |
1 | ingob | 334 | } |
805 | hbuss | 335 | if(SIO_DEBUG && (!UpdateMotor || !MotorenEin)) |
1 | ingob | 336 | { |
337 | DatenUebertragung(); |
||
338 | BearbeiteRxDaten(); |
||
339 | } |
||
340 | else BearbeiteRxDaten(); |
||
173 | holgerb | 341 | if(CheckDelay(timer)) |
1051 | killagreg | 342 | { |
173 | holgerb | 343 | if(UBat < EE_Parameter.UnterspannungsWarnung) |
1051 | killagreg | 344 | { |
345 | if(BeepMuster == 0xffff) |
||
346 | { |
||
173 | holgerb | 347 | beeptime = 6000; |
348 | BeepMuster = 0x0300; |
||
1051 | killagreg | 349 | } |
173 | holgerb | 350 | } |
1153 | hbuss | 351 | SPI_StartTransmitPacket(); |
723 | hbuss | 352 | |
353 | SendSPI = 4; |
||
1051 | killagreg | 354 | timer = SetDelay(20); |
355 | } |
||
921 | hbuss | 356 | LED_Update(); |
604 | hbuss | 357 | } |
723 | hbuss | 358 | if(!SendSPI) { SPI_TransmitByte(); } |
1 | ingob | 359 | } |
360 | return (1); |
||
361 | } |
||
362 | |||
1219 | hbuss | 363 | |
364 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 160 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 220) SenderOkay = 160; |
||
365 | //if(HoehenReglerAktiv && NaviDataOkay && SenderOkay < 101 && SenderOkay > 10 && FromNaviCtrl_Value.SerialDataOkay > 1) SenderOkay = 101; |