Subversion Repositories FlightCtrl

Rev

Details | Last modification | View Log | RSS feed

Rev Author Line No. Line
687 killagreg 1
#include <avr/io.h>
2
#include <avr/interrupt.h>
3
 
4
 
684 killagreg 5
#include "main.h"
6
#include "uart1.h"
7
#include "fifo.h"
8
#include "ubx.h"
9
 
10
 
11
 
12
// FIFO-objects and buffers for input and output
13
 
14
//#define BUFSIZE_IN  0x96
15
//volatile uint8_t inbuf[BUFSIZE_IN];
16
//fifo_t infifo;
17
 
18
#define BUFSIZE_OUT 0x96
19
volatile uint8_t outbuf[BUFSIZE_OUT];
20
fifo_t outfifo;
21
 
22
/****************************************************************/
23
/*              Initialization of the USART1                    */
24
/****************************************************************/
25
void USART1_Init (void)
26
{
27
        // USART1 Control and Status Register A, B, C and baud rate register
28
        uint8_t sreg = SREG;
29
        uint16_t ubrr = (uint16_t) ((uint32_t) SYSCLK/(8 * USART1_BAUD) - 1);
30
 
31
        // disable all interrupts before reconfiguration
32
        cli();
33
 
34
        // disable RX-Interrupt
35
        UCSR1B &= ~(1 << RXCIE1);
36
        // disable TX-Interrupt
37
        UCSR1B &= ~(1 << TXCIE1);
38
        // disable DRE-Interrupt
702 killagreg 39
        UCSR1B &= ~(1 << UDRIE1);
684 killagreg 40
 
41
        // set direction of RXD1 and TXD1 pins
42
        // set RXD1 (PD2) as an input pin
702 killagreg 43
        PORTD |= (1 << PORTD2);
701 killagreg 44
        DDRD &= ~(1 << DDD2);
45
 
684 killagreg 46
        // set TXD1 (PD3) as an output pin
702 killagreg 47
        PORTD |= (1 << PORTD3);
701 killagreg 48
        DDRD  |= (1 << DDD3);
684 killagreg 49
 
50
        // USART0 Baud Rate Register
51
        // set clock divider
52
        UBRR1H = (uint8_t)(ubrr>>8);
53
        UBRR1L = (uint8_t)ubrr;
54
 
55
        // enable double speed operation
56
        UCSR1A |= (1 << U2X1);
57
        // enable receiver and transmitter
58
        UCSR1B = (1 << TXEN1) | (1 << RXEN1);
59
        // set asynchronous mode
60
        UCSR1C &= ~(1 << UMSEL11);
61
        UCSR1C &= ~(1 << UMSEL10);
62
        // no parity
63
        UCSR1C &= ~(1 << UPM11);
64
        UCSR1C &= ~(1 << UPM10);
65
        // 1 stop bit
66
        UCSR1C &= ~(1 << USBS1);
67
        // 8-bit
68
        UCSR1B &= ~(1 << UCSZ12);
69
        UCSR1C |=  (1 << UCSZ11);
70
        UCSR1C |=  (1 << UCSZ10);
71
 
72
        // flush receive buffer explicit
73
        while ( UCSR1A & (1<<RXC1) ) UDR1;
74
 
75
        // enable interrupts at the end
76
        // enable RX-Interrupt
77
        UCSR1B |= (1 << RXCIE1);
78
        // enable TX-Interrupt
702 killagreg 79
        UCSR1B |= (1 << TXCIE1);
684 killagreg 80
        // enable DRE interrupt
81
        //UCSR1B |= (1 << UDRIE1);
82
 
83
 
84
        // restore global interrupt flags
85
    SREG = sreg;
86
 
87
    // inint FIFO buffer
88
        //fifo_init (&infifo,   inbuf, BUFSIZE_IN);
702 killagreg 89
    //fifo_init (&outfifo, outbuf, BUFSIZE_OUT);
684 killagreg 90
}
91
 
702 killagreg 92
/*int16_t USART1_putc (const uint8_t c)
684 killagreg 93
{
94
    int16_t ret = fifo_put (&outfifo, c);
95
    // create an data register empty interrupt
96
    UCSR1B |= (1 << UDRIE1);
97
 
98
    return ret;
99
}
702 killagreg 100
*/
684 killagreg 101
/*int16_t USART1_getc_nowait ()
102
{
103
    return fifo_get_nowait (&infifo);
104
}
105
 
106
 
107
uint8_t USART1_getc_wait ()
108
{
109
    return fifo_get_wait (&infifo);
110
}
111
*/
112
 
113
/****************************************************************/
114
/*               USART1 data register empty ISR                 */
115
/****************************************************************/
702 killagreg 116
/*ISR(USART1_UDRE_vect)
684 killagreg 117
{
118
// Move a character from the output buffer to the data register.
119
// When the character was processed the next interrupt is generated.
120
// If the output buffer is empty the DRE-interrupt is disabled.
121
    if (outfifo.count > 0)
122
       UDR1 = _inline_fifo_get (&outfifo);
123
    else
124
        UCSR1B &= ~(1 << UDRIE1);
125
}
702 killagreg 126
*/
684 killagreg 127
 
128
/****************************************************************/
129
/*               USART1 transmitter ISR                         */
130
/****************************************************************/
702 killagreg 131
/*ISR(USART1_TX_vect)
684 killagreg 132
{
133
 
134
}
702 killagreg 135
*/
684 killagreg 136
/****************************************************************/
137
/*               USART1 receiver ISR                            */
138
/****************************************************************/
139
ISR(USART1_RX_vect)
140
{
141
        uint8_t c;
702 killagreg 142
        c = UDR1; // get data byte
757 killagreg 143
        if (BoardRelease == 11) ubx_parser(c); // and put it into the ubx protocol parser
684 killagreg 144
}